Kenmore 66517482N710 dishwasher Parts

Yes, repairing a Kenmore dishwasher like model 66517482N710 is worth it when the fix is a common wear item (filters, valves, pumps, heating) and the total repair cost stays well below the price of a comparable new dishwasher; most repairs restore full performance for years.

Quick way we decide: repair vs replace

Use these checkpoints first; they match the most common real-world outcomes for Kenmore 665-series dishwashers.

• Repair when the issue is isolated (no heat, won’t drain, won’t fill, poor cleaning) and the tub is solid.
• Replace when the tub is leaking, the unit has repeated major failures, or multiple expensive parts are needed at once.
• Repair when you can DIY safely (basic hand tools, careful shutoff of power and water).
• Replace when you need a same-week solution and parts plus labor approach the cost of a new unit.
• Repair when the dishwasher is otherwise quiet and cycles complete normally.

Typical cost-to-value guide (dishwasher)

Situation	Usually best choice	Why
Single failed functional part (drain, fill, heat)	Repair	Restores core operation with limited parts/labor
Repeated drainage or wash issues plus heavy buildup	Repair first	Cleaning and a few parts often solve it
Tub leak or structural damage	Replace	High labor, poor long-term reliability
Multiple major parts at once (pump, control, harness)	Replace	Cost stacks quickly

Parts that commonly make repair worthwhile on 66517482N710

These are frequent “high-impact” fixes for symptoms like no heat, not draining, or not filling:

• Element assembly W10518394 (heating and drying performance)
• Dishwasher drain pump W10876537 (standing water, slow drain)
• Dishwasher water inlet valve W11175771 (won’t fill, weak fill)
• Dishwasher filter WPW10463906 (poor cleaning, debris recirculation)

Why it matters

A dishwasher is mostly a sealed wash system (fill, heat, circulate, drain). When one component fails, replacing that single part usually brings the whole system back, which is why repair is often the better value.

What to check before spending money

We recommend confirming the basics first using the 66517482N710 owner’s manual.

• Verify the cycle completes and note any error indicators
• Clean the filter area and check for debris in the sump
• Confirm the drain path is clear (including any air gap, if your setup uses one)
• Make sure the water supply valve is fully open

Last updated: February 2026

For Kenmore dishwashers like model 66517482N710, we find the model number on the appliance’s rating label, usually located on the tub frame around the door opening. Open the door fully and look along the left or right edge of the frame.

Where to look first

Check these common label locations on Kenmore 665-series dishwashers:

• Along the tub frame just inside the door (left or right side)
• On the top edge of the tub opening (under the countertop lip)
• On the inner edge of the door itself (near the latch area)
• Occasionally behind the lower toe-kick panel (less common)

What the label looks like

The rating label typically includes:

• Model number (example: 66517482N710)
• Serial number
• Electrical ratings (volts/amps)
• Sometimes a barcode

Tips to read it accurately

• Wipe the label gently with a damp cloth to remove detergent film.
• Use a flashlight and take a photo; zooming in often makes faint print readable.
• Write the model number exactly as shown (include all digits and letters).

Why it matters

The full model number is what we use to match the correct Kenmore dishwasher parts, diagrams, and procedures. Even one digit off can point to a different pump, rack, or control.

You need	Use it for	Example parts it affects
Model number	Correct part fit and diagrams	Dishwasher drain pump W10876537, dishwasher water inlet valve W11175771
Serial number	Production variation checks	Minor design changes by run

For more label-location details and model identification help, use the 66517482N710 owner's manual.

Last updated: March 2026

The average lifespan of a Kenmore dishwasher like model 66517482N710 is 10 years. With routine cleaning, correct detergent use, and prompt repair of leaks or draining issues, many units reach that mark without major component replacement.

What most often limits dishwasher life

These are the most common wear points that affect service life:

• Drain and circulation performance (clogs, pump wear)
• Heating performance (water not heating, poor drying)
• Door sealing and leaks (gaskets, hose connections)
• Rack and track wear (rollers, stops, rails)
• Control and wiring issues (intermittent power, stuck keys)

Maintenance that extends lifespan

We recommend these habits for 66517482N710:

• Clean the filter regularly; a clogged filter strains the pump
• Rinse heavy soil off dishes; avoid hard debris (bones, seeds)
• Run hot water at the sink before starting a cycle for better wash results
• Use a dishwasher cleaner monthly to reduce grease and mineral buildup
• Inspect for slow drains and address them early

Parts that commonly get replaced over time

If performance drops, these model-matched parts are typical fixes:

• Dishwasher filter WPW10463906 (poor cleaning, debris recirculation)
• Dishwasher drain pump W10876537 (standing water, slow drain)
• Element assembly W10518394 (poor drying, water not heating)

Symptom	Likely area	What to check first
Dishes gritty	Filtration	Filter and spray arm ports
Water left in tub	Drain system	Drain pump and drain path
Poor drying	Heat	Heater circuit and rinse aid

Why it matters

Knowing the 10-year average helps you decide whether to maintain, repair, or refresh key components like the filter, heater, or drain pump to keep wash performance and energy use where it should be.

For cycle guidance and care recommendations specific to this Kenmore dishwasher, use the 66517482N710 owner's manual.

Last updated: March 2026