Owner’s manual
Error Codes
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10658582892, the model number is printed on the model and serial number label on the side wall inside the fresh food (refrigerator) compartment. The 10658582892 owner's manual shows this label location in the Parts and Features section.
How to find it quickly
- Open the refrigerator (fresh food) door, not the freezer door.
- Look along the inside side wall of the refrigerator compartment.
- Check near the crisper/meat drawer area, where labels are commonly placed.
- Use a flashlight; the label can be easy to miss in low light.
- Write down both the model number and serial number for parts lookup and service.
What the label typically includes
| Item on the label | What it’s used for | Example for this unit |
|---|---|---|
| Model number | Matching parts and diagrams | 10658582892 |
| Serial number | Identifying production details | Varies by unit |
| Basic electrical info | Reference for service | Varies by unit |
Why it matters
We use the exact model number to match the correct Kenmore parts for your refrigerator’s configuration (ice maker, water filtration system, shelves, and door bins). Even small model-number differences can change which parts fit.
Last updated: January 2026
How to tell cubic feet of Kenmore refrigerator by model number?
For Kenmore model 10658582892, the model number alone usually does not state the exact cubic-foot capacity. The most reliable way is to look up the capacity in the 10658582892 owner's manual; if you need an estimate, we calculate interior volume from measurements (inches) and convert to cubic feet.
Best ways to find the cubic feet
- Check the manual first: Capacity is typically listed in the specifications section of the 10658582892 owner's manual.
- Check the model/serial label location: On this style of Kenmore side-by-side, the manual shows the model and serial number label is on a side wall inside the refrigerator compartment.
- Measure for an estimate: Measure usable interior space (not the outside cabinet) and convert.
- Use the “106.” prefix correctly: The “106” prefix identifies the manufacturing source family; it is not a direct capacity code.
How to estimate cubic feet by measuring
- Empty the compartment you are measuring (fresh food and freezer can be estimated separately).
- Measure width x depth x height of the usable interior space in inches.
- Multiply to get cubic inches.
- Divide by 1,728 to convert to cubic feet.
Quick conversion table
| What you have | What to do | Result |
|---|---|---|
| Inches (W x D x H) | Multiply | Cubic inches |
| Cubic inches | Divide by 1,728 | Cubic feet (approx.) |
Tips so your estimate is closer to real capacity
- Measure to the inside liner, not the door bins.
- Subtract obvious “non-usable” areas (large light housings, thick air ducts, big control housings).
- If your refrigerator has an ice maker and ice bin, remember they reduce usable space; the manual lists an automatic ice maker and ice bin as common features.
Why it matters
Cubic feet helps us match the right parts and accessories (like shelves, bins, and filtration components) and it also helps you compare storage space when planning food storage and organization.
Last updated: January 2026
Where is the water filter on a Kenmore side by side refrigerator?
On Kenmore model 10658582892, the water filter is installed inside the refrigerator compartment, and the filter status light is located at the top of the refrigerator compartment. Use the steps in the 10658582892 owner's manual to access the filter and replace it correctly.
How to find it quickly
Most side-by-side Kenmore units like 10658582892 place the filter in one of these common spots inside the fresh food section:
- In the upper-right area of the refrigerator compartment
- In the upper-left area of the refrigerator compartment
- At the base grille area inside the fresh food section (less common on this style)
- Near the top where the filter status light and controls are located
What to do if you are not seeing a filter
If your refrigerator has a water dispenser or ice maker but you do not see a cartridge right away:
- Check behind the top interior controls area in the refrigerator section
- Look for a small filter door or twist-in cartridge head
- Confirm the dispenser is not locked (the lock only disables the levers, not the filter system)
- If water flow is weak, remove the cartridge and test dispenser flow briefly; stronger flow points to a clogged filter
Signs the filter needs changing
The manual describes a filter status light that helps time replacement.
| Status light color | What it means | What we recommend |
|---|---|---|
| Green | Filter is OK | Keep using it |
| Yellow | Low filter life | Plan to replace soon |
| Red | Replace filter | Replace now |
Why it matters
A correctly installed, unclogged water filter helps maintain normal water flow to the dispenser and ice maker. When the filter is full or installed incorrectly, you can see noticeably reduced water flow and ice or water performance issues.
Last updated: January 2026
Why is my Kenmore side by side refrigerator not getting cold?
If your Kenmore side-by-side refrigerator model 10658582892 is not getting cold, the most common causes are blocked airflow between compartments, controls set incorrectly (including Thermostat set to OFF), dirty condenser coils, or doors not sealing fully. Start with airflow and control settings, then move to cleaning and seal checks using the 10658582892 owner's manual.
Quick checks that fix many “not cooling” complaints
- Confirm the Thermostat Control is not set to OFF and both controls are near the mid-settings.
- Make sure air vents are not blocked by food (blocked vents stop proper cooling).
- Close both doors firmly; check for packages holding a door open.
- Clean condenser coils (dust buildup reduces heat transfer and cooling).
- After any control change, allow up to 24 hours for temperatures to stabilize.
Airflow and control settings (most important on this model)
This Kenmore design circulates cold air from the freezer to the refrigerator section; if vents are blocked, the temperature controls will not work properly.
| What you see | Likely cause | What to do |
|---|---|---|
| Freezer cold, fresh food warm | Airflow blocked or Air Balance set wrong | Clear vents; adjust Air Balance toward refrigerator |
| Both sections warm | Thermostat set too warm or OFF; dirty coils | Set to mid or colder; clean coils |
| Temps swing a lot | Doors not sealing; frequent openings | Inspect gaskets; reduce door-open time |
When a part is likely involved
If airflow is clear, controls are set correctly, and coils are clean, a failed temperature control component can prevent proper cooling. For this model, the temperature control is the refrigerator thermostat WP2198202.
Signs the thermostat is the issue
- Unit runs too little or not at all even though it is warm inside
- Cooling returns briefly after adjusting the dial, then stops again
- Temperatures never stabilize after 24 hours
Why it matters
Poor airflow, dirty condenser coils, or a door that does not seal makes the compressor work harder and can keep both compartments from reaching safe food-storage temperatures.
Last updated: January 2026
