Kenmore 10657062600 side-by-side refrigerator Parts

The most common issues we see on Kenmore refrigerators like model 10657062600 are cooling problems, ice maker and water dispenser troubles, leaks, and unusual noises. These typically trace back to airflow restrictions, defrost-system faults, or water-supply components; the 10657062600 owner's manual troubleshooting section helps pinpoint the cause fast.

Most common problems (and what usually causes them)

• Not cooling or warm temperatures: poor air circulation, dirty condenser area, evaporator fan or defrost problems
• Runs too much: frequent door openings, warm room, large food load, or doors left ajar (often normal with high-efficiency compressors)
• Ice maker not making ice: water supply issue, inlet valve problem, or ice maker assembly failure
• Water dispenser issues: new installation, warm water in the reservoir, or filter restriction
• Leaks/puddles: clogged defrost drain, loose water line, or door seal not sealing
• Noises: buzzing, pulsating, sizzling, popping, or water-running sounds can be normal during operation and defrost

Quick checks we recommend first

• Confirm the controls are on and allow 24 hours after installation or major changes for temperatures to stabilize.
• Make sure vents are not blocked; follow the manual guidance for proper air circulation.
• If the unit is noisy, compare what you hear to the “normal sounds” list in the manual.
• For dispenser water temperature, note that dispensed water is typically chilled only to about 50°F (10°C); discard the first glass if it has not been used recently.
• If ice or water is weak, replace the filter and re-flush the system; use the refrigerator water filter EDR3RXD1 if it matches your setup.

Common symptoms and the parts that often fix them

Symptom	Most likely system	Parts commonly involved for 10657062600
No ice or slow ice production	Water supply / ice maker	Refrigerator inlet valve W10408179, refrigerator ice maker 2198597
Frost buildup, warm fridge	Defrost system / airflow	Refrigerator defrost bi-metal WPW10225581, refrigerator heater WP2323198
Warm temps, poor airflow	Evaporator fan	Evaporator motor WP2315549, refrigerator evaporator fan blade WP2169142

Why it matters

Catching airflow, defrost, and water-supply problems early helps protect food temperatures, reduces compressor run time, and prevents repeat issues like ice buildup or dispenser leaks.

Last updated: February 2026

For Kenmore model 10657062600, the most reliable way to get the exact cubic-foot capacity is to use the model’s specification information in the 10657062600 owner's manual or the refrigerator’s rating plate inside the fresh food section. Capacity can vary by configuration even within the same model family.

Fast ways to find the exact capacity

• Check the rating plate (usually inside the refrigerator compartment on a side wall or ceiling area); it often lists capacity or key specs.
• Look up the specifications section in the 10657062600 owner's manual.
• If you only need a planning estimate (cabinet fit, moving, etc.), use typical side-by-side capacity ranges (see table below).

Typical capacity range (for quick estimating)

Most Kenmore side-by-side refrigerators are commonly in the 20 to 26 cu. ft. range. Use this only as a rough estimate until you confirm the exact spec for 10657062600.

What you need	Best source	What you get
Exact cubic feet	Rating plate or manual	Model-specific capacity
Rough estimate	Typical range	Good for planning only
Freezer planning (outage, dry ice)	Freezer cubic feet	Helps calculate dry ice amount

Why it matters

Cubic-foot capacity affects how you plan food storage and even emergency prep. For example, the manual’s outage guidance uses freezer cubic feet to estimate dry ice needs (2 lb per cubic foot of freezer space), so having the correct capacity helps you plan accurately.

Related maintenance tip (often confused with “capacity” issues)

If you are checking capacity because storage feels tight due to poor cooling or ice buildup, address performance first:

• Confirm the refrigerator is holding about 37°F in the fresh food section and 0°F in the freezer.
• Make sure vents are not blocked by food packages.
• Keep door seals clean and closing fully.

Last updated: February 2026

Kenmore model numbers are read left to right: the first 3 digits identify the manufacturer code, and the remaining digits identify the specific product design and version. For your Kenmore side-by-side refrigerator, the full model number is 10657062600; use the complete number when looking up parts and service information in the owner's manual.

Where to find the model number on a refrigerator

On most Kenmore side-by-side refrigerators, the model and serial tag is typically located in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the refrigerator compartment near the light
• Behind the crisper drawers area
• Along the door frame when the refrigerator door is open
• On a label near the base grille area (less common)

How to break down a Kenmore model number (quick guide)

Kenmore model numbers usually follow this pattern:

• Prefix (first 3 digits): manufacturer code (who built it)
• Middle digits: base model/platform (the core design)
• Last digits: engineering revision, color, feature package, or production variation

Example structure

Section	Example	What it tells you
Manufacturer prefix	106	Who built the unit
Model identifier	570626	Design series/platform
Version/suffix	00	Variation/revision

Why the full model number matters for parts

Small changes in a suffix can affect fit and compatibility for parts like a water filter, ice maker, or inlet valve. When ordering parts for 10657062600, match the full model number to avoid issues.

Common part categories that are model-sensitive include:

• Water filter and filter cap
• Ice maker and ice bin
• Water inlet valve and dispenser tubing connections
• Door gasket panels and door hardware
• Temperature control and electronic control components

Helpful tip for this model

If you are troubleshooting dispenser or ice issues while identifying your model, our DIY guide Kenmore 106 model refrigerator error codes can help you interpret common control and sensor-related problems.

Last updated: February 2026

On Kenmore model 10657062600, the model number is printed on the refrigerator’s identification label (the same label that lists the serial number). You typically find this label inside the fresh food compartment on a side wall or near the ceiling, where it is easy to read with the door open. See the owner's manual for the exact label location and illustrations for your unit.

Common places to check first

Look in these spots before pulling the refrigerator out:

• Inside the refrigerator compartment on the left or right side wall
• Inside the refrigerator compartment near the top (ceiling area)
• Around the door opening (door jamb area) where the gasket meets the cabinet
• Behind the crisper drawers on the side wall (visible after removing drawers)
• On the inside edge of the freezer compartment opening (less common, but possible)

What the label looks like (and what to write down)

The ID label usually includes both a model number and a serial number. We recommend copying both exactly as shown.

Item	What it’s used for	Tip
Model number (example: 10657062600)	Matching parts to your exact refrigerator	Write it exactly, including all digits
Serial number	Dating/production info and service identification	Take a clear photo for reference

Why it matters

Kenmore side-by-side refrigerators can look similar across multiple model series, but parts like the water filter, ice maker, and inlet valve can vary by model. Using the correct model number helps ensure you get the right replacement part the first time.

Quick next step once you find it

After you locate the label, use the model number to confirm fit and choose parts such as:

• Genuine Kenmore refrigerator water filter EDR3RXD1
• Refrigerator ice maker 2198597
• Refrigerator inlet valve W10408179

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10657062600, a “not cooling” problem is usually caused by a power issue, controls being turned off or set incorrectly, blocked air vents that prevent airflow between sections, or a failed cooling/defrost component (such as the evaporator fan motor, defrost heater, or electronic control). See the 10657062600 owner's manual for control and airflow details.

Quick checks we recommend first

• Confirm the power cord is fully plugged into a grounded 3-prong outlet.
• Verify the outlet works (plug in a lamp).
• Check the house breaker or fuse.
• Make sure the refrigerator controls are turned ON.
• Check that air vents are not blocked by food packages.
• After a move or first install, allow 24 hours to reach normal temperatures.

Airflow and control settings (most common “easy” causes)

This model relies on airflow between the freezer and fresh food sections; cold air enters the refrigerator through the top vent and returns to the freezer. If vents are blocked, temperatures rise even though the unit may sound like it is running.

Symptom	Most likely cause	What to do next
Freezer cold, refrigerator warm	Blocked return or top vent	Clear vents; avoid overpacking
Both sections warm	Controls off, power issue, or sealed-system/cooling failure	Verify power and controls; then move to component checks
Cooling is weak after restart	Normal pull-down time	Wait 24 hours before judging temps

When it is likely a part failure

If power and vents are good and temperatures still climb, these parts commonly affect cooling:

• Evaporator fan not moving air: consider the evaporator fan motor evaporator motor WP2315549 or fan blade refrigerator evaporator fan blade WP2169142.
• Defrost system problem causing frost buildup and airflow loss: check refrigerator heater WP2323198 and refrigerator defrost bi-metal WPW10225581.
• Temperature regulation or control issue: consider refrigerator temperature control WP2315562 or refrigerator electronic control 4388932.

Why it matters

A refrigerator can “run” and still not cool if airflow is blocked or if frost buildup restricts the evaporator. Catching the simple causes first (power, controls, vents) prevents unnecessary parts replacement and helps protect food from spoiling.

Last updated: February 2026