Frigidaire LFGH3054UFC free standing gas range Parts

Yes. For your Frigidaire free standing gas range model LFGH3054UFC, using the full model number is the most accurate way to find replacement parts that fit, because it matches your exact burner, oven, and control configuration. Confirm the model and serial from the range’s serial plate before ordering.

Where to find the model number on LFGH3054UFC

The serial plate is typically on the right-hand surface of the oven front frame near the storage or warmer drawer area; some units may also list an alternate location under the cooktop. Use the model and serial from that plate when searching parts. See the owner's manual for the exact location notes and product record details.

How we recommend searching parts by model number

• Use the complete model number: LFGH3054UFC (include all letters).
• Match the part to the correct system: surface burners, bake, broil, door, or controls.
• If multiple similar parts appear, compare the part name and part ID.
• For gas and ignition issues, start with the most common wear items (igniters and sensors).
• Keep your serial number handy; it helps confirm production details when needed.

Common LFGH3054UFC parts customers look up

Symptom or need	Part to check first	Example part on this model page
Oven will not bake or slow to heat	Bake igniter	Bake igniter 316489403
Oven temperature seems off	Oven temperature sensor	Range oven temperature sensor 316490000
Need to convert to LP gas	LP conversion kit	Range lp conversion kit GRLP4
Oven light is out	Appliance light bulb	Appliance light bulb, 40-watt 316538904

Why it matters

Ranges often have look-alike parts that do not interchange. Searching by model number helps ensure the replacement part fits your Frigidaire LFGH3054UFC correctly and avoids ignition, temperature, or installation problems.

Last updated: February 2026

For the Frigidaire LFGH3054UFC gas range, the most commonly replaced parts are ignition and temperature-related components (igniters and sensors), plus wear items like oven light bulbs, door seals, and racks. These parts directly affect heating, baking accuracy, and everyday usability; see the owner's manual for care and replacement guidance.

Most common replacement parts for this model

These are the parts we see replaced most often on a freestanding gas range like the LFGH3054UFC:

• Oven igniters (bake and broil) when the oven will not heat or takes too long to light
• Oven temperature sensor when baking temperatures are inaccurate
• Oven light bulb and light lens/socket when the interior light stops working
• Oven door seal (gasket) when heat leaks or cooking becomes uneven
• Oven racks when racks are missing, warped, or hard to slide
• Door lock motor and switch assembly when self-clean lock issues prevent normal operation

Parts on this page that match those common fixes

Here are examples of common replacement parts available for the LFGH3054UFC:

Symptom	Common part to check/replace	Example part on this page
Oven will not ignite or is slow to heat	Bake igniter	Bake igniter 316489403
Oven temperature seems off	Range oven temperature sensor	Range oven temperature sensor 316490000
Oven light is out	Appliance light bulb	Appliance light bulb, 40-watt 316538904
Heat leaks around door	Oven door seal	Range oven door seal 5304498835
Need an extra rack or rack is damaged	Oven rack	Frigidaire range oven rack 316496201

Quick checks before you order a part

We recommend these basic checks to avoid replacing the wrong component:

• Confirm the issue is oven (bake/broil) vs surface burner performance.
• For ignition problems, watch for a glow from the igniter and listen for gas ignition.
• For temperature complaints, test with an oven thermometer over several cycles.
• For light issues, replace the bulb first; the manual notes the bulb sits behind a glass shield and power should be off before servicing.
• For door heat leaks, inspect the gasket for gaps, tears, or flattening.

Why it matters

Igniters, sensors, and door seals control how reliably your Frigidaire range lights, how evenly it bakes, and how efficiently it holds heat. Replacing a worn wear-item (like a bulb, rack, or gasket) often restores normal performance without deeper gas or control troubleshooting.

Last updated: February 2026

For your Frigidaire LFGH3054UFC gas range, the part numbers are identified by looking up parts under your exact model number; the model and serial tag (serial plate) is typically found at the storage or warmer drawer area on the oven front frame. Use the serial plate details, then confirm the matching part in the parts list and diagrams. See the LFGH3054UFC owner's manual for the serial plate location notes.

Where to find the model and serial tag on LFGH3054UFC

Start with these common locations called out for this range:

• Open the storage drawer or warmer drawer; check the right-hand surface of the oven front frame
• Check the lower right front frame of the appliance
• If needed, check an alternate location under the cooktop
• Record the model number, serial number, and any lot number or letter shown

How to use that information to get the correct part number

Once you have the model and serial information, use it to match the correct diagram and then the exact replacement.

• Match parts by model number first (LFGH3054UFC)
• Use the diagram callouts to find the part name
• Confirm the part ID and part number before ordering
• If multiple similar parts appear, use the serial and lot/letter to pick the correct revision

Item you find on the range	What it helps you do	Example part on this model page
Model number (LFGH3054UFC)	Pulls the correct parts list for your exact range	Bake igniter 316489403
Serial number and lot/letter	Confirms the correct version when designs change	Helps avoid ordering the wrong revision
Part ID and part number	Identifies the exact replacement to purchase	Part ID 316489403, part number 5304508786

Why it matters

Frigidaire gas range parts can look similar but vary by production run. Using the serial plate information and matching the part ID and part number helps ensure the replacement fits and works correctly.

Last updated: February 2026