KitchenAid KSRS25ILSS01 refrigerator Parts

Yes. KitchenAid makes 33-inch-wide refrigerators, but your KSRS25ILSS01 is a side-by-side model and its exact cabinet width depends on the specific product design and door/handle configuration. For model-specific dimensions and clearance needs, use the owner's manual.

A “33-inch wide” refrigerator typically refers to the cabinet width class, not always the total space needed once you include doors, handles, and airflow clearance.

Common width-related measurements to check:

• Cabinet width (box only)
• Overall width with doors and handles
• Door swing clearance (space needed to open fully)
• Side and top ventilation clearance
• Depth (counter-depth vs full-depth)

We recommend measuring your opening and comparing it to the refrigerator’s published dimensions.

Use this quick checklist:

• Measure the opening width in 3 places (top, middle, bottom)
• Measure height to the lowest cabinet/soffit point
• Measure depth to any wall trim or baseboards
• Confirm clearance for door swing and drawer pull-out
• Plan for at least a small gap for airflow around the cabinet

A refrigerator that is “33 inches wide” can still require more than 33 inches of real-world space once you account for handles, hinges, and clearance. Confirming these details up front prevents installation headaches and door-seal problems.

Last updated: February 2026

The KitchenAid KSRS25ILSS01 side-by-side refrigerator is about 25.3 cubic feet total capacity. Use this as the overall storage volume; the exact split between fresh food and freezer sections varies by configuration and shelving setup.

We recommend checking the capacity listing in the product literature for your unit, especially if you are comparing fit, storage planning, or replacing the refrigerator.

• Look for “Capacity” or “Total capacity” in the specifications section
• Confirm you are reading the entry for KSRS25ILSS01 (not a similar KSRS25 model)
• Note that bins, shelves, and the ice bucket reduce usable space even though total cubic feet stays the same
• If you are measuring for a replacement, focus on exterior dimensions and door swing clearance too

For model-specific documentation, use the owner's manual.

Capacity helps you compare refrigerators in the same size class, but it does not tell the whole story. Interior layout, ice maker location, and door bin design can make two 25 cu. ft. units feel very different in day-to-day use.

Last updated: February 2026

For your KitchenAid KSRS25ILSS01 side-by-side refrigerator, start troubleshooting by confirming power, control settings, airflow, and water supply basics. Many “no cool,” “no dispense,” and “runs too much” complaints are caused by blocked vents, a defrost cycle, or a shutoff valve or filter issue; use the owner's manual steps to narrow it down fast.

• Make sure the power cord is fully plugged into a grounded 3-prong outlet.
• Reset a tripped breaker or replace a blown household fuse.
• Confirm the refrigerator and freezer controls are not set to OFF.
• If it is in a defrost cycle, wait 30 minutes and recheck operation.
• Clear items away from interior air vents to restore proper air circulation.
• If the unit has digital controls and is not cooling, turn it OFF then ON to reset.

If water flow is weak or stops, the manual points to supply and filter checks first.

• Verify the home shutoff valve is fully turned on.
• Check the water line for kinks.
• Reinstall or replace a clogged filter; KSRS25ILSS01 commonly uses the refrigerator water filter EDR5RXD1.
• If water or ice leaks at the dispenser, hold the glass under the chute 2 to 3 seconds after releasing the lever.

Troubleshooting in this order prevents unnecessary part replacement and helps you separate normal operation (like automatic defrost and longer run times after loading groceries) from true failures.

Last updated: March 2026