Craftsman 917273322 tractor Parts

Craftsman model 917273322 was made across multiple production runs, so the model number alone does not identify a single year. To get the exact build year for your tractor, use the serial number and date code information shown in the owner's manual.

Look for the model and serial number label (commonly under the seat, on the frame rail, or near the rear fender pan). Once you have the serial number, use the date code format described in the manual to determine the manufacturing date.

• Park on a flat surface, set the parking brake, and remove the key.
• Lift the seat and inspect the frame area for the ID label.
• Write down the full model number and the full serial number.
• Use the serial number date code to identify the year.
• If the label is missing or unreadable, compare your tractor’s assemblies (steering, mower deck, transaxle) to the illustrated parts listings in the manual.

The documentation we have is specific to TRACTOR, model number 917.273322, and it includes detailed illustrated parts lists for major systems such as steering, mower deck, and the transaxle. That confirms the model identification, but the build year is determined by the serial number on your specific unit.

Craftsman tractors with the same model family can have running changes (wiring, deck linkage, steering parts). Using the serial number date code helps you identify the correct year and ensures you order the right replacement parts for your exact configuration.

Last updated: February 2026

The model number for this Craftsman riding mower is 917.273322 (often written without the dot as 917273322). You’ll see it printed on the tractor’s identification label and on the cover pages of the owner's manual for this exact unit.

Check these common locations on Craftsman front-engine lawn tractors:

• Under the seat on the frame or fender pan
• On the left or right side of the frame near the engine
• Near the rear hitch plate area
• Inside the hood area on the chassis rail
• In the manual’s “Model No.” field

It’s normal to find multiple numbers on a riding mower. Here’s how to tell them apart:

Using the exact model number 917273322 ensures you get the right Craftsman parts for your tractor’s configuration (mower deck, steering, ignition, and hardware). Even small model-number differences can change belts, pulleys, switches, and deck components.

If you’re confirming you’re on the right parts list, these are examples of parts shown for this model:

• Hub cap 532104757
• Molded ignition key 532140403
• Red.pto.swtc 582107601

Last updated: February 2026

Craftsman lawn tractors like model 917273322 were built with different engine makes and spec variations over time; the reliable way to identify the exact engine on your tractor is to read the engine ID label on the engine itself and confirm it against the owner's manual.

Use these checks so you match the correct tune-up and repair parts:

• Find the engine ID label on the blower housing, valve cover, or near the starter
• Write down the engine model, type, and code (or spec number)
• Note whether the engine is single-cylinder or V-twin
• Confirm whether it uses an oil filter (oil capacity differs with and without a filter)
• Use the recorded engine numbers when selecting filters, ignition parts, and carburetor items

These tractor-level specs help with routine service on the 917273322:

If you are troubleshooting a no-start or blade engagement issue, these model-matched parts are often involved:

• Molded ignition key 532140403 (starting and security)
• Push-in interlock switch 532176138 (safety circuit that allows starting)
• Red.pto.swtc 582107601 (PTO engagement; can affect starting on some setups)

The engine ID label determines the correct air filter, fuel filter, carburetor parts, and ignition components. The tractor manual specs (oil type, capacities, spark plug) keep maintenance accurate and prevent damage.

Last updated: February 2026