Kenmore 66513262K112 undercounter dishwasher Parts

Yes. We still carry replacement parts for Kenmore dishwashers, including the Kenmore 66513262K112, because many service parts remain available for common repairs like draining, filling, heating, and rack hardware. The key is matching parts to your exact model number so fit and electrical connections are correct.

How to make sure you order the right part

Use your full model number (66513262K112) and compare the part name and ID before you buy.

• Confirm the model tag matches 66513262K112 exactly
• Use the exploded views and part lists in the 66513262K112 owner's manual
• Match symptoms to the system: fill, wash, drain, heat, or door
• Replace mounting clips, seals, or hoses if they are brittle or leaking
• After any repair, run a short cycle and verify the dishwasher fills and drains

Common Kenmore 66513262K112 parts we see customers replace

These are typical wear items and failure points on undercounter dishwashers:

Problem you notice	Part that often fixes it	Example part for this model
Won’t drain, water left in tub	Drain pump or drain hose	Dishwasher drain pump WPW10348269
Won’t fill or fills slowly	Water inlet valve	Dishwasher water inlet valve W11175771
Poor cleaning, weak spray	Spray arm or circulation issues	Dishwasher spray arm WPW10491331
Dishes not drying well	Heater circuit components	Dishwasher heater W10703867
Upper rack problems	Adjusters, wheels, rail stops	Dishrack adjuster kit W10712395

Why it matters

Dishwasher parts are model-specific. Using the correct Kenmore 66513262K112 parts helps prevent leaks, poor wash performance, and repeat failures, and it keeps installation clearances and wiring routing consistent with the 66513262K112 installation guide.

Last updated: February 2026

Yes, repairing a Kenmore undercounter dishwasher model 66513262K112 is usually worth it when the problem is a single, replaceable part and the machine is otherwise in good condition; repairs become less cost-effective when multiple major components are failing or the tub is leaking.

Quick way we decide: repair vs. replace

• Repair when the issue is isolated (drain problem, no fill, poor wash) and the unit runs quietly with no leaks.
• Replace when the tub leaks, the unit has repeated electrical failures, or several expensive parts are needed at once.
• Repair when you can confirm basics first (power, door latch, water supply) using the 66513262K112 installation guide.
• Replace when racks and door hardware are heavily worn and you are also facing a pump or control issue.
• Repair when the dishwasher is properly installed and secured so symptoms are not caused by shifting or rubbing.

Common repairs on this model that are often worth it

These are typical “single-part” fixes that can restore normal operation:

Symptom	Likely area	Example part for 66513262K112
Won’t drain or drains slowly	Drain path / pump	Dishwasher drain pump WPW10348269
Won’t fill or fills slowly	Water supply / inlet valve	Dishwasher water inlet valve W11175771
Dishes not drying well	Heating circuit	Dishwasher heater W10703867
Poor spray or weak cleaning	Wash arm / circulation	Dishwasher spray arm WPW10491331

Checks to do before spending money on parts

We recommend these quick checks because they can prevent an unnecessary repair:

• Confirm the circuit breaker/fuse is good.
• Make sure the door is closed tightly and latched.
• Verify the cycle is set correctly and actually started.
• Confirm the water supply valve is turned on.
• Start a short cycle and check for water in the bottom of the tub after about 2 minutes (then unlatch, wait 5 seconds, and open the door).

Why it matters

A dishwasher that is installed level, secured to the cabinet, and getting proper water and power can look “broken” when it is really a setup or supply issue. Confirming the basics first helps you put money into the right repair.

Last updated: February 2026

On Kenmore undercounter dishwashers like model 66513262K112, the model number is printed on the dishwasher’s identification label, typically located on the tub frame around the door opening. Open the door fully and look along the inner edge of the frame.

Where to look on the dishwasher

Check these common label locations first (in order):

• Along the left or right side of the tub frame, just inside the door opening
• Across the top edge of the tub opening (under the countertop lip)
• On the door edge itself (the inner perimeter of the door)
• Behind the lower access panel area (less common)

If you are installing the unit or have panels off, the installation guide also helps you identify access panels and areas you may already be working around.

What the model number label looks like

Most Kenmore dishwasher labels include several identifiers. Use the model number exactly as shown.

Label item	What it’s used for	Example you might see
Model number	Correct parts match and diagrams	66513262K112
Serial number	Production date tracking	Varies
Electrical ratings	Installation and service reference	Varies

Tips to make it easier

• Wipe the tub frame with a damp cloth; detergent film can hide the print.
• Use a flashlight and view from an angle; labels can be glossy.
• Take a photo and zoom in; it is often easier than reading it in place.
• Write the model number down exactly, including all digits and letters.

Why it matters

We use the full model number (including the suffix) to match the correct Kenmore parts for your exact build. That prevents ordering look-alike parts that do not fit, such as a dishwasher water inlet valve W11175771 or dishwasher drain pump WPW10348269 that may vary by revision.

Last updated: March 2026