Kenmore 11092582100 washer Parts

To identify your Kenmore washer model, we look for the model number tag on the machine itself; for Kenmore units it often starts with 110 (like 11092582100) and using the exact model number ensures you get the correct Kenmore washer parts and diagrams.

Where to find the model number on a Kenmore washer

Most Kenmore washers place the model/serial tag in one of these common spots:

• Top-load washer: under the lid, around the tub opening
• Top-load washer: on the rear panel (outside back)
• Front-load washer: inside the door opening, along the door frame
• Front-load washer: behind the lower access panel (on some designs)
• Any style: near the control console or where the power cord exits

What the model number looks like (and what to write down)

Kenmore model numbers are usually 10 to 12 characters and may include dots or letters. For this parts page, the correct format is 11092582100.

What to capture	Example	Why it matters
Model number	11092582100	Matches the correct parts list and diagrams
Serial number	(varies)	Helps date the unit and confirm production run
Prefix (first 3 digits)	110	Identifies the manufacturing source used for parts lookup

Why it matters

A single digit off can point to a different Kenmore washer design with different components (agitator, drive system, water valve, timer). Using the exact model number helps us match the right replacement part the first time.

Related parts customers often match by model

If you are identifying the model to fix a symptom, these are common model-matched items for Kenmore 110-style washers:

• Inlet valve 285805
• Water pump WP3363394
• Coupling 285753A

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore washer like model 11092582100 when the fix is a common wear part and the machine otherwise runs normally. Repairs such as a drain pump, motor coupling, or agitator parts often restore full washing performance for far less than replacing the washer.

A practical way to decide

We recommend comparing the total repair cost (parts plus labor, if any) to replacement cost and the washer’s overall condition.

• Repair it when the problem is isolated (won’t drain, won’t agitate, won’t spin) and the tub and cabinet are in good shape
• Repair it when the fix is a known wear item (pump, coupling, clutch, lid switch)
• Replace it when the outer tub is damaged, the gear case is failing repeatedly, or multiple major systems are worn out
• Repair it when you can DIY safely and the part is in stock
• Replace it when you need several high-cost parts at once and performance has been declining for a while

Common repairs that are often “worth it” on 11092582100

These are frequent, straightforward fixes on many Kenmore 110 top-load designs:

Symptom	Likely area	Example part for this model
Won’t drain or leaves water in tub	Drain system	Water pump WP3363394
Motor runs but washer won’t agitate/spin	Drive connection	Coupling 285753A
Agitator moves poorly or “ratchets”	Agitator mechanism	Agitator dog 80040
Won’t spin or has weak spin	Spin/drive system	Clutch 285785

Why it matters

A targeted repair keeps a solid washer in service, avoids the learning curve of a new machine, and often fixes the exact complaint (no drain, no spin, poor agitation) without changing how your laundry routine works.

Tips to keep the repair cost under control

• Confirm the symptom first (drain vs spin vs agitation) before ordering parts
• Check for simple causes: overloaded basket, kinked drain hose, coins/socks in the pump
• If the washer won’t run at all, test the lid switch circuit before replacing major drive parts
• When you open the cabinet, inspect for leaks and worn hoses so you do not repeat the teardown

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11092582100, staying closer to the high end usually comes down to load size, good drain performance, and keeping the drive system and suspension components in good shape.

What affects washer lifespan the most

• Overloading (stresses the drive motor, clutch, and gearcase)
• Unbalanced loads (wears suspension and can damage the tub support over time)
• Poor draining (pump strain, standing water, odors)
• Hard water and detergent buildup (valves, tub, and moving parts work harder)
• Small leaks (corrosion and bearing wear can accelerate)

Maintenance that helps you reach 10 to 15 years

• Use the right load size; bulky items should be balanced around the basket.
• Run occasional hot wash cycles (when safe for fabrics) to reduce residue.
• Check and clear the drain path if you notice slow draining; a weak or noisy pump is a common wear item.
• If agitation gets weak or “ratchety,” inspect the agitator drive parts early; replacing small parts can prevent bigger wear.
• Level the washer and keep it stable to reduce vibration and suspension stress.

Common wear items (and what they usually cause)

Symptom	Likely wear area	Example part for this model
Won’t drain or drains slowly	Drain pump	Water pump WP3363394
Agitator slips or won’t “grab”	Agitator drive	Agitator dog 80040
No agitation/spin but motor runs	Drive coupling	Coupling 285753A
Loud spin, burning smell, weak spin	Clutch/drive	Clutch 285785

Why it matters

Knowing the typical lifespan helps you decide whether to repair or replace. On a 11092582100, replacing a lower-cost wear part (like a pump, coupling, or agitator dogs) often restores performance and can extend service life for years.

Last updated: March 2026