Kenmore 25368822012 top-mount refrigerator Parts

On a Kenmore top-mount refrigerator like model 25368822012, the top compartment is the freezer. It’s the section designed to keep foods frozen, and it also helps the refrigerator run efficiently when air can circulate properly between packages (see the 25368822012 owner's manual).

In a top-mount design, the freezer is the coldest compartment and typically includes shelves, door bins, and airflow passages that move cold air through the appliance.

Common freezer functions include:

• Freezing and long-term storage of foods
• Keeping ice cream and other temperature-sensitive items colder in the interior
• Supporting airflow so cold air can circulate freely around packages
• Helping maintain stable temperatures when the door seals tightly

When the freezer is overloaded or airflow is blocked, freezing slows down and temperatures can rise. That can affect food quality and can also make the refrigerator work harder, which impacts energy use.

• Leave space between packages so cold air can circulate
• Avoid putting hard-to-freeze items (like ice cream) in the door bins
• Keep the refrigerator level so doors close tightly
• Follow the recommended temperature control settings in the 25368822012 owner's manual
• Clean the condenser periodically to help the system run efficiently

Last updated: January 2026

For Kenmore model 25368822012, the correct water filter depends on whether your refrigerator is equipped with a water/ice system and which filter style it uses (internal cartridge vs. inline). We match the right filter by confirming your exact model number and checking the filter location shown in the 25368822012 owner's manual.

Start by checking the most common places a filter is installed on a top-mount refrigerator:

• Inside the fresh food compartment (upper right corner or ceiling)
• In the base grille (front bottom)
• On the back of the refrigerator (inline filter on the water line)
• No filter installed (some setups rely on an external filtration system)

If you do not see a filter housing, your refrigerator may use an inline filter on the supply line or no filter at all.

These steps prevent ordering the wrong part and help with water flow issues after replacement:

• Confirm the model tag reads 25368822012 (usually inside the fresh food section)
• Look for a filter head, cap, or push-button release near the filter location
• If you have an ice maker, verify the household water valve is fully open
• Make sure your water supply pressure is in the typical operating range (many refrigerators need 30 to 100 psi)
• If the refrigerator was recently moved, recheck the water line for kinks and leaks

Using the correct water filter keeps water taste and odor under control and helps protect the water inlet valve and ice maker from sediment restriction. A mismatched filter can cause leaks, low water flow, or poor ice production.

If you are troubleshooting low ice output or warm temperatures, the 25368822012 installation guide also covers water supply requirements and connection basics.

Last updated: January 2026

Common Kenmore Elite refrigerator problems are cooling issues, frost buildup, water leaks, and unusual noises; on Kenmore model 25368822012, these symptoms are most often tied to airflow, door sealing, or the defrost system. Use the troubleshooting and care guidance in the 25368822012 owner's manual to narrow the cause before replacing parts.

• Not cooling or weak cooling: dirty condenser coil, failed evaporator fan, blocked vents, or doors left ajar
• Excessive frost/ice in freezer: defrost system problem (heater or bi-metal thermostat) or a leaking door gasket
• Water on floor or in fresh food section: clogged/iced defrost drain, door left slightly open, or high humidity
• Runs too long: warm room conditions, frequent door openings, or a worn/dirty gasket letting warm air in
• Noises (buzzing, rattling, clicking): fan blade hitting ice, failing fan motor, or normal cycling sounds

1. Confirm doors close fully and the cabinet is level (a rocking refrigerator can prevent a good seal).
2. Clean the door gasket and inspect for gaps, tears, or hardened sections.
3. Reduce door openings and allow 24 hours for temperature changes to stabilize after adjustments.
4. Make sure the toe grille is not blocked; airflow is required for proper operation.
5. If installed in a garage or unheated space, keep room temperature in the recommended range (cold rooms can cause freezer performance problems).

When airflow is restricted or warm air leaks past a gasket, the compressor runs longer to hold temperature. That can lead to food spoilage, frost buildup, and higher energy use, even when the controls are set correctly.

Last updated: January 2026