Kenmore 66513223N411 dishwasher Parts

Your Kenmore dishwasher model number is printed on the model and serial number label on the tub or inner door area. On Kenmore models like 66513223N411, you typically see it when you open the door and look along the door frame or tub edge.

Where to look first (fastest spots)

• Open the door and check the left or right inner door frame
• Look along the top edge of the tub opening
• Check the tub wall near the front opening
• If the label is worn, use a flashlight and look for etched or faint printing
• If the unit is pulled out, check the side of the frame near the front legs

What the label looks like

Most Kenmore dishwashers use a sticker or metal tag that includes:

• Model number (example format: 665.XXXXXXXX)
• Serial number
• Electrical ratings (volts/amps)

What you see	What it means	What to do next
Starts with 665	Kenmore dishwasher built on a common platform used for many 665-series models	Use the full model number to match parts exactly
Label is missing or unreadable	Model ID cannot be confirmed from the tag	Use the manual and compare features, then match parts by diagram

Why it matters

We use the exact model number to ensure parts fit and function correctly. Small differences between 665-series dishwashers can change the correct fit for items like the upper rack adjusters, door latch, water inlet valve, or heating element.

Helpful references for this model

• Check the label location and parts/features diagram in the 66513223N411 owner's manual.
• If you are installing or pulling the dishwasher out to find the tag, follow the safety and handling steps in the 66513223N411 installation guide.

Last updated: February 2026

Yes. We still support replacement parts for Kenmore dishwashers, including the Kenmore 66513223N411, as long as the part is still manufactured and available. The key is matching parts by your exact model number so you get the correct fit for items like pumps, valves, racks, and latches.

How to make sure you order the right part

Use your model number 66513223N411 and confirm the part’s location and description in the 66513223N411 owner’s manual.

• Match the full model number from the rating label, not just “Kenmore 665”
• Identify the failed system (drain, fill, heating, door, rack)
• Compare the part name and ID, not only the part number
• Replace related wear items when it makes sense (for example, hose clamps with a hose)
• Follow the wiring and plumbing guidance in the 66513223N411 installation guide when the repair involves electrical or water connections

Common Kenmore dishwasher parts that are still widely available

These are frequent repairs on this model family, and we commonly see them in stock:

Symptom	Likely part category	Example part for 66513223N411
Won’t drain or leaves water	Drain pump or drain hose	Dishwasher drain pump WPW10348269
Not filling or fills slowly	Water inlet valve	Dishwasher water inlet valve W11175771
Poor cleaning on lower rack	Spray arm or circulation issues	Dishwasher spray arm, lower W10849471
Door won’t latch or won’t start	Door latch	Dishwasher door latch WPW10653840
Upper rack problems	Adjusters, wheels, rail stops	Dishwasher rack adjuster W10712395

Why it matters

Kenmore dishwashers are built for years of dependable operation, and many repairs are straightforward when you match parts to the exact model. Using the correct OEM-style replacement part prevents leaks, fit issues, and repeat failures.

Last updated: February 2026

A small amount of water in the bottom of your Kenmore 66513223N411 dishwasher is normal; the installation check specifically has you verify there is water in the tub shortly after starting a cycle. If you have standing water that never drains, the drain path is restricted or the drain pump is not moving water.

What’s normal vs. a problem

What you see	Most likely meaning	What to do next
Thin layer of water after a cycle	Normal water left to keep seals from drying	No repair needed
Water remains for hours and smells	Drain restriction or weak drain	Clean filter area and check hose routing
Water rises above the filter area	Drain failure or backflow from sink/disposal	Stop using until drain issue is corrected

Quick checks we recommend first

• Cancel/drain the cycle (if your model has that option) and listen for the drain motor running.
• Remove the lower rack and clean the filter area (food, labels, glass).
• Check the sink/disposal connection for a clog (common after disposal use).
• Inspect the drain hose for kinks, crushing, or a low loop that can cause backflow.
• Confirm the dishwasher is level; a forward tilt can leave more water visible.

Parts that commonly cause standing water

If the drain path is clear but it still will not pump out, these parts are the most common fixes:

• Dishwasher drain pump WPW10348269 (won’t drain, may hum but not move water)
• Dishwasher drain hose 8269144A (blocked, kinked, or deteriorated)

Why it matters

Standing water can redeposit soil on dishes, create odors, and lead to poor wash performance. Getting the drain system flowing correctly restores cleaning and helps protect the pump and sump area.

Model-specific tip from the documentation

During the initial start-up check, the guide has you run a short cycle and confirm there is water in the bottom of the tub after the first couple of minutes. Use the 66513223N411 installation guide to compare what you’re seeing to the expected start-up behavior.

Last updated: February 2026

If the bottom spray arm on your Kenmore 66513223N411 dishwasher is not spinning, the most common causes are blocked spray holes, a clogged filter or sump area, or low water flow into the tub. We start by confirming the tub fills with water, then clean the spray path.

Quick checks we recommend first

• Make sure the bottom rack is loaded so nothing pins the spray arm in place (large pans, cookie sheets, or utensils hanging down).
• Confirm the detergent dispenser area is not blocked by tall items; poor wash action often looks like a spray arm problem.
• Spin the lower spray arm by hand with the dishwasher off; it should turn freely without scraping.
• Check the filter area for food soil buildup (your model uses an Ultra Wash HE filter system).
• Run a short cycle and listen: strong wash sound usually means the circulation system is working; a weak or absent wash sound points to a pump or water supply issue.

Verify the dishwasher is actually filling

Your installation checks for this model include a simple fill confirmation: start the shortest cycle, wait about 2 minutes, unlatch the door, wait 5 seconds, then open and look for water in the bottom of the tub. Follow the steps in the installation guide.

What you’ll see and what it means

What you observe	Likely cause	What to do next
Little or no water in tub	Water supply or fill problem	Check shutoff valve, inlet screen, then consider the inlet valve
Water present but arm still not moving	Clog or circulation issue	Clean spray arm holes and filter, then check pump performance

Parts that commonly fix “no spin” symptoms

If cleaning and loading changes do not restore spray action, these model-matched parts are common next steps:

• Dishwasher spray arm, lower W10849471: cracked hub, stripped mount, or internal blockage.
• Dishwasher water inlet valve W11175771: weak fill can reduce pressure so the arm never drives.
• Dishwasher pump motor W11032770: weak circulation can prevent strong spray and arm rotation.

Why it matters

The lower spray arm provides most of the wash coverage for the bottom rack. When it cannot build pressure (from clogs, low fill, or weak circulation), dishes stay dirty and the cycle can run longer with poorer results.

Last updated: February 2026