Owner’s manual
View engine
What model number is the Craftsman 917271652 engine?
On Craftsman lawn tractor model 917271652, the engine is a Briggs & Stratton model 310707, type 0137-E1. You can confirm the exact engine identification and related engine parts breakdown in the 917271652 owner's manual.
We recommend verifying the engine ID directly on the engine label because it is the most reliable match for ordering tune-up and fuel system parts.
- Look for the engine ID label on the blower housing, valve cover area, or near the starter
- Record Model, Type, and Code (Briggs & Stratton uses all three)
- Clean the label gently so all digits are readable
- Match the label to the manual listing: 310707-0137-E1
| Item | What it identifies | For your tractor |
|---|---|---|
| Tractor model number | The Craftsman chassis and deck platform | 917271652 |
| Engine model number | The Briggs & Stratton engine family | 310707 |
| Engine type number | The exact engine build configuration | 0137-E1 |
Using the correct engine model and type helps us match parts like carburetor kits, gaskets, ignition components, and fuel line items to the exact Briggs & Stratton configuration installed on your 917271652.
If you are troubleshooting a no-start or crank issue, the riding lawn mower engine spins but wont start video is a good next step for common checks (fuel, spark, air).
Last updated: February 2026
What kind of engine does a Craftsman riding lawn mower have?
The Craftsman lawn tractor model 917271652 is equipped with a low-emission, 17 HP engine (gas) and is paired with an electric start system and a 42-inch mower deck. For the exact engine make and service specifications, use the 917271652 owner's manual.
From the model documentation, these are the key engine-related details you can rely on:
- Engine output: 17 HP
- Engine type: low-emission gasoline engine
- Starting system: electric start
- Mower deck size: 42-inch
- Drive system noted in manual: 6-speed transaxle
Many Craftsman tractors were built with engines from common suppliers (for example, Briggs & Stratton or Kohler), but the sure way to identify yours is by the engine ID label.
- Lift the hood and look for an engine data tag on the blower housing or valve cover area
- Record the engine model, type, and code/spec numbers
- Match those numbers when buying tune-up parts (air filter, spark plug, fuel filter)
- Use the manual’s maintenance section for the correct service intervals and procedures
| Item | What it tells you | Where to find it |
|---|---|---|
| Tractor model number (917271652) | Which Craftsman chassis and deck you have | Frame tag (often under seat or on frame rail) |
| Engine model/type/code | Exact engine manufacturer and service parts | Engine label under hood |
The tractor model number (917271652) helps you get the right deck, chassis, and drive parts; the engine model/type/code is what ensures you get the correct ignition parts, filters, and carburetor-related items for starting and performance.
Last updated: February 2026
What brand engine does Craftsman use?
Craftsman lawn tractors can use engines from several manufacturers; for model 917271652, the owner’s manual specifies it has a low-emission 17 HP engine, and the exact engine brand and model details are typically listed on the engine label and in the specifications section of the 917271652 owner's manual.
Check these spots first (engine brand is printed on the engine itself):
- Engine shroud/blower housing (top or side cover): usually shows Briggs & Stratton, Kohler, Kawasaki, etc.
- Valve cover or starter housing: often has a brand badge or stamped ID
- Emission label near the muffler or on the shroud: lists engine family and displacement
- Model-type-code tag (common on Briggs & Stratton): used to match tune-up and carb parts
- Owner’s manual specifications page: confirms the tractor configuration and maintenance requirements
Craftsman has historically sourced engines from multiple makers. Here is what you will most often see on front-engine riding mowers:
| Engine brand | How it’s commonly labeled | What you’ll use it for |
|---|---|---|
| Briggs & Stratton | Model/Type/Code | Tune-up parts, carburetor, ignition parts |
| Kohler | Command/Courage/7000 series style labels | Filters, fuel system parts, charging system |
| Kawasaki | FR/FS series style labels | Air filter, fuel filter, starter parts |
The engine brand determines the correct air filter, spark plug, oil filter (if equipped), fuel filter, and carburetor parts. It also affects maintenance specs like oil type and service intervals, which helps prevent hard-starting, surging, and loss of power.
Even when the engine is running well, these tractor parts commonly wear and can affect performance:
- Husqvarna lawn tractor mulching blade, 21-in 532134149 (cut quality and discharge)
- V-belt 532138255 (ground drive performance)
- Molded ignition key 532140403 (starting and key wear)
Last updated: February 2026
What year did Craftsman make the 917271652?
Craftsman model 917271652 identifies a specific front-engine lawn tractor configuration, but the model number by itself does not equal a single “model year.” For the exact build date range for your tractor, use the identification information and decals referenced in the 917271652 owner's manual.
We use the tractor’s product identification label (not the deck decal) to pin down the manufacturing date.
- Look under the seat area and around the rear fender pan for the product/serial label
- Write down the full model and serial information exactly as shown
- Check for a date code format (often month and year, or a coded date)
- Compare the label info to the operator information and decal callouts in the manual
- If the label is missing or unreadable, use the parts diagrams to confirm major assemblies match your tractor
The documentation clearly ties the parts lists and diagrams to TRACTOR, MODEL NUMBER 917.271652 (for example, chassis, steering, lift, seat, and decals sections). That confirms you have the correct manual for the model, but it does not assign a single calendar year to the model number.
| Item you have | What it tells us | What to do next |
|---|---|---|
| Model number: 917271652 | Which parts diagrams/manual apply | Use the serial/date label to identify the year |
| Serial/date label | The actual build date range | Record it and use it when ordering parts |
| Decals and assemblies | Helps confirm configuration | Match to diagrams if the label is missing |
The build date affects parts fitment on riding mowers and tractors, especially for deck components, steering parts, belts, and safety interlock switches. Confirming the year (via the serial/date label) helps us get you the right replacement part the first time.
Last updated: February 2026
How much does it cost to replace a riding lawn mower engine?
For a Craftsman riding lawn tractor like model 917271652, a complete engine replacement typically costs $800 to $2,500 installed (engine plus labor). The engine itself is usually the biggest cost; labor commonly runs 4 to 8 hours depending on how much has to be transferred from the old engine.
- Engine type and horsepower (single-cylinder vs. V-twin)
- New vs. remanufactured vs. used engine
- What gets reused (starter, charging system, muffler, pulleys, wiring)
- Extra repairs found during the swap (belts, battery cables, fuel lines)
- Shop labor rate and pickup/delivery fees
| Cost item | Typical range | Notes |
|---|---|---|
| Replacement engine | $500 to $1,900 | Varies most by brand/spec and availability |
| Labor | $300 to $900 | Often 4 to 8 hours |
| Misc. parts/fluids | $25 to $150 | Oil, filter, clamps, hardware |
| Estimated total | $800 to $2,500 | Most common real-world range |
We see many tractors that seem to need an engine but actually have a starting or safety-interlock issue.
- Verify the clutch/brake pedal is fully depressed and the attachment clutch is disengaged
- Confirm the seat switch and parking brake interlock are working (the engine should shut off if you leave the seat under certain conditions)
- Test the battery and cable connections for corrosion/loose terminals
- Listen for a single click (often solenoid/battery) vs. cranking but no start (often fuel/ignition)
Helpful DIY guidance: riding lawn mower engine clicks but doesnt turn over video
An engine swap is one of the highest-cost repairs on a riding mower. Getting the correct diagnosis first helps you avoid replacing a good engine when the real problem is a battery, wiring, or an interlock circuit. For model-specific operating and safety-interlock checks, use the 917271652 owner's manual.
Last updated: February 2026
