Kenmore 10653359300 refrigerator Parts

The exact cabinet dimensions for the Kenmore 10653359300 side-by-side refrigerator are listed in the product specifications section of the owner's manual. For planning purposes, most Kenmore 106 side-by-side units are roughly 33 to 36 inches wide, about 66 to 70 inches tall, and about 30 to 34 inches deep (not including required clearance).

Use the model-specific documentation so you get the correct width, height, and depth for your exact configuration (handles and doors can change the depth).

• Check the “Product dimensions” or “Product specifications” section in the owner's manual
• Measure the cabinet width at the widest point (usually the hinge side)
• Measure height from floor to top hinge cover (not just the case top)
• Measure depth two ways: case-only and door/handle included
• Confirm door swing space before final placement

Your manual calls out ventilation and door-swing spacing that affects the real-world footprint.

Correct dimensions and clearance prevent poor cooling, noisy operation, and doors that cannot open far enough to remove bins and shelves. If you are also routing a water line for the dispenser or ice maker, leaving room behind the refrigerator helps protect the connection.

Last updated: February 2026

On Kenmore refrigerator model 10653359300, the ER IF (or Er IF) code points to an ice fan problem in the freezer area. That fan moves cold air through the door air ducts to help keep the ice maker compartment cold, so when it fails or airflow is blocked, ice production and cooling can suffer.

• Make sure the freezer door is closing fully and the door gasket is sealing.
• Look for frost or ice buildup around the ice maker area or rear freezer panel (airflow restriction).
• Confirm the ice bin and any packaging are not blocking the air vents.
• Power reset: unplug the refrigerator (or switch off the breaker) for 5 minutes, then restore power.
• Listen for the ice fan: a working fan typically makes a steady, light fan sound when running.

If troubleshooting points to a defrost-related airflow restriction, we commonly see these parts involved on side-by-side refrigerators:

• Refrigerator defrost bi-metal WPW10225581 (helps protect and control defrost heating)
• Evaporator fan components (fan blade, bracket) if the fan is noisy or damaged

The ice fan is part of the airflow path that keeps the ice maker area cold. When airflow drops, the ice maker can slow down, cubes can melt and refreeze, and the freezer temperature can become less stable.

For control locations, airflow diagrams, and freezer/ice maker checks specific to Kenmore 10653359300, use the owner's manual.

Last updated: February 2026

Sabbath mode on your Kenmore 10653359300 refrigerator is designed to let the refrigerator operate in a Sabbath-observant way by limiting certain user-interface responses while still keeping food safely cold. If the door is left ajar, the High Temp alarm can still activate for food-safety reasons; once the door is closed, normal operation resumes.

Sabbath mode is mainly about how the controls and alerts behave, not about turning cooling off.

• The refrigerator and freezer continue cooling to maintain the set temperatures.
• Some control panel responses (such as beeps or immediate display feedback) may be limited.
• Door-related behaviors can change so opening the door does not trigger typical user-interface actions.
• The High Temp alarm can remain active to help protect food if temperatures rise.

Use these best practices so temperatures stay stable and alarms do not trigger unnecessarily.

• Set your refrigerator and freezer temperatures before enabling Sabbath mode.
• Keep door openings brief; warm air entering the cabinet is the most common cause of temperature rise.
• Make sure the doors fully close and seal every time.
• Avoid loading large amounts of warm food right before or during Sabbath mode.
• If you get a High Temp alarm, close the door and allow time for temperatures to recover.

Sabbath mode helps you observe holidays without sacrificing safe food storage. The key point is that cooling continues, and the High Temp alarm can still warn you if a door is left ajar long enough for temperatures to rise.

For the exact button sequence and any model-specific notes, follow the steps in the 10653359300 owner's manual.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10653359300, the model number is printed on the model and serial number label located on the inside wall of the refrigerator compartment. Open the fresh food door and look along the interior side walls for a rating label.

• Open the refrigerator (fresh food) door, not the freezer door
• Check the inside left wall first, then the inside right wall
• Look near the crisper drawers area and the lower side walls
• Scan for a white or silver rating label with barcodes and text
• Record both the model number and serial number exactly as shown

The rating label usually lists several identifiers. Use the model number for parts lookup and the serial number for date and production details.

We use the exact model number to match the correct Kenmore parts (like shelves, bins, ice maker components, and water system parts) because small design changes can affect fit and compatibility. The model/serial label location is also referenced in the owner's manual.

Last updated: February 2026