Kenmore 9119384591 30" electric freestanding range Parts

For your Kenmore electric range, the model number is printed on a rating label on the appliance body, not on removable parts. On Kenmore model 9119384591, we typically see the label in the oven door jamb, behind the storage/warming drawer, or on the back panel near the power cord area.

Where to look first (fastest checks)

• Open the oven door and check the frame (door jamb) around the opening
• Pull out the bottom storage drawer and look on the frame behind it
• Check the back panel near the vent area
• Look on the side panel near the lower rear corner
• If the label is worn, use a flashlight and take a close-up photo to zoom in

What the label looks like

Most Kenmore range labels include:

• Model number (example: 9119384591)
• Serial number
• Electrical rating (volts/amps)
• Sometimes a manufacturing code

Why the exact model number matters

Kenmore ranges often share similar styling, but parts can differ by model and revision. Using the exact model number helps us match the correct bake element, surface element, control switch, or wiring parts for your specific 30" electric freestanding range.

Common mix-ups (and how to avoid them)

What you found	What it usually means	What to do
A number on the control panel	Not the model number	Keep looking for the rating label
A number stamped on a heating element	Part number	Use it only to identify that part
A short number on paperwork	Often incomplete	Confirm from the appliance label

If you need a part once you find the model

After you confirm the model number, match parts by the model and the symptom. For example, if the oven will not bake, the g.e. range bake element WB44K5012 is a common replacement part for this model page.

Why it matters

The model number is the key to getting the right-fit Kenmore parts the first time and avoiding returns due to small design differences.

Last updated: February 2026

For the Kenmore 9119384591 30-inch electric freestanding range, the most commonly replaced parts are the heating parts that wear from high heat and daily use (surface elements and oven elements), plus a few “wear-and-tear” items like drip pans, light parts, and door sealing hardware.

Most common replacements (and what symptoms they fix)

• Bake element: oven won’t heat, heats unevenly, or takes much longer to preheat (see g.e. range bake element WB44K5012).
• Broil element and supports: weak broil, no broil, or element sagging (see broilunt 240 WB44X232 and broil support WB2X9719).
• Surface element (burner) and drip pans: burner won’t heat, cycles erratically, or drip pan is rusted/warped (see surf unit-8" WB30X255, surf unit-6" WB30X256, range drip pan WB31K5025, and range drip pan (chrome) WB31K5024).
• Surface element control switch: burner stuck on high, won’t turn on, or won’t regulate temperature (see range surface element control switch WB23K5027 or control WB23M24).
• Oven light parts: light out or lens damaged (see 40a15bulb 40A15 and light lens WB25T10042).
• Door sealing and hinge parts: heat leaking, poor baking results, or door not closing smoothly (see oven door gasket WB2K5319 and hinge WB14X104).

Quick “what to replace” guide

Symptom	Most likely part	Example part on this model
Oven not heating in bake	Bake element	WB44K5012
No broil or weak broil	Broil element	WB44X232
One burner won’t heat	Surface element or switch	WB30X255, WB23K5027
Burner stuck on high	Control switch	WB23K5027, WB23M24
Oven light not working	Bulb or lens	40A15, WB25T10042
Heat leaking at door	Door gasket or hinge	WB2K5319, WB14X104

Why it matters

Replacing the right part restores safe, predictable heating. A failing element or switch can cause uneven cooking, longer preheat times, or a burner that will not regulate temperature.

Last updated: February 2026

A Kenmore 9119384591 30-inch electric freestanding range typically lasts 13 years with normal household use and basic maintenance. Keeping heating components in good shape (bake and broil elements, surface elements, and wiring connections) helps you reach that expected service life.

What affects lifespan most

• Heat stress on elements from frequent high-temperature baking and broiling
• Power quality and wiring condition, especially at the terminal block
• Door seal condition (heat leaks make the oven work harder)
• Spillovers and corrosion around surface elements and drip pans
• Ventilation and cleaning habits that prevent overheating and grease buildup

Quick maintenance checklist (high impact)

• Keep the oven cavity and vent area clean; baked-on grease holds heat and strains components.
• Inspect the power cord connection area for discoloration or a hot smell; repair promptly.
• Replace a torn or flattened door gasket to maintain stable temperatures.
• Avoid lining the oven bottom with foil; it can trap heat and damage components.
• If a burner cycles erratically, address it early (switch or element issues can cascade).

Common wear items and what they do

Part type	What you may notice	Example part on this model
Bake element	Slow preheat, uneven baking, no heat	G.e. range bake element WB44K5012
Oven door gasket	Heat escaping, longer cook times	Oven door gasket WB2K5319
Terminal block	Intermittent power, burning smell, melted wires	Terminal block assembly 330031
Surface element switch	Burner stuck on high or won’t heat	Range surface element control switch WB23K5027

Why it matters

Knowing the typical 13-year lifespan helps you decide whether to repair or refresh key parts. On electric ranges, replacing a failed element, door gasket, or terminal block often restores safe, consistent cooking performance without replacing the entire appliance.

Last updated: March 2026