Kenmore 58716193400 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58716193400, as long as the specific part is still produced and available. The key is matching parts by the full model number so the fit, electrical ratings, and mounting points are correct.

Use the model number 58716193400 and confirm the part by name and diagram location in the 58716193400 owner's manual. For installation-related items (hoses, wiring, anchoring), the 58716193400 installation guide helps you verify connection style and routing.

Best practices we use to avoid wrong-part returns:

• Match by model number first (58716193400), then by part name and diagram callout
• Compare the part number on the old part when possible
• Check whether the issue is a seal, drain, fill, heat, or door-latch problem before ordering
• Replace related wear items together (for example, seals and clamps) when you already have access
• Confirm the dishwasher is level and properly anchored after any repair to prevent leaks and vibration

These are frequent fixes for leaks, draining problems, and door issues:

• Gasket 809006501 (lower door seal) for water leaking at the bottom of the door
• Hose 807117001 (drain hose) for poor draining, kinks, or cracks
• Valve 154637401 (water inlet valve) for no-fill or slow-fill symptoms
• Latch assembly A00099902 for a door that will not latch or a unit that will not start

Dishwashers are model-specific for mounting, electrical connectors, and hose routing. Using the exact 58716193400 match helps ensure proper sealing, correct water flow, and safe operation after the repair.

Last updated: February 2026

Your Kenmore dishwasher model number is printed on the model and serial label inside the tub; on Kenmore model 58716193400, the manual shows the serial label is on the right side of the tub. Use that full model number when ordering parts or looking up error codes in the 58716193400 owner's manual.

• Open the door and look along the right interior tub wall for the model/serial label.
• Check the inner door frame area near the latch and hinges.
• Look along the top edge of the door (label is sometimes placed there).
• If the label is worn, use a flashlight and look for etched or faint printing.
• If the dishwasher is pulled out, check the side panels near the front.

The label typically includes a model number and serial number. For this Kenmore family, the manual lists model formats like 587.1418_, 587.1518_, 587.1618_, and 587.1619_ (the last digit(s) and color code can vary).

Use these practical options to still identify the correct model:

• Match your dishwasher’s control panel layout and rack style to the diagrams in the 58716193400 owner's manual.
• Compare key parts you can see, such as the lower rack rollers or door hardware.
• If you are troubleshooting, use the correct Kenmore error code set; start with Kenmore he dishwasher error codes and match the display style and beeps to your dishwasher.

Kenmore dishwashers can look similar across series, but parts like a door seal, drain hose, water inlet valve, or control module can vary by model. Using the exact model number prevents ordering the wrong replacement part and speeds up troubleshooting.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher is usually worth it when the unit is under about 10 years old or the fix is a common wear item (seal, hose, valve, heater). For Kenmore model 58716193400, we use the repair cost versus replacement cost and the symptom severity to decide.

• Repair when the estimate is under 50% of the cost of a comparable new dishwasher.
• Replace when the estimate is over 50%, especially if multiple major symptoms are happening (leaks plus poor washing plus draining issues).
• Repair first when the problem is clearly isolated (single leak point, single drain failure, single heat issue).

These are common, targeted repairs that often restore performance without replacing the dishwasher:

• Door-area leaks: inspect the lower door seal and tub gasket area; replace the gasket 809006501 if it’s torn, flattened, or pulling away.
• Not draining: check the drain path and air gap (if installed), then consider the hose 807117001 or dishwasher drain pump A00126501.
• Not filling or fills slowly: verify water supply and inlet screen; the valve 154637401 is a common fix.
• Poor drying or lukewarm water: heating circuit issues can involve the heater 154665201 and related connections.
• Overfilling symptoms: the float/overfill protector must move freely; the switch 154773201 can fail.

A dishwasher like the Kenmore 58716193400 recirculates filtered wash water for cleaning performance; when one component fails (drain, fill, heat, or sealing), you often get big symptoms from a single fix. Using the troubleshooting and maintenance steps in the 58716193400 owner’s manual helps you confirm the failure before buying parts.

Last updated: February 2026