Kenmore 10659124800 side-by-side refrigerator Parts

The exact cubic-foot capacity for the Kenmore 10659124800 is listed on the model’s rating label and in the specifications section of the 10659124800 owner's manual. Most Kenmore side-by-side refrigerators in this design range are roughly 22 to 26 cu. ft., but the manual is the best place to confirm your exact number.

How to find the exact capacity (fast)

• Check the specifications pages in the 10659124800 owner's manual.
• Look for the model and serial tag inside the fresh food compartment (commonly on a side wall or ceiling area).
• If the tag lists total volume (or separate refrigerator and freezer volumes), add them for total cu. ft.
• If you see multiple numbers, use the one labeled total or total volume.

Typical capacity ranges (what to expect)

Refrigerator type	Typical total capacity
Side-by-side (standard width)	22 to 26 cu. ft.
Large side-by-side	26 to 30 cu. ft.
French door (large capacity)	25 to 30+ cu. ft.

Why it matters

Capacity affects how much food you can store, but it also impacts shelf and bin fit, water filter access, and how you plan airflow around items. Using the correct spec for model 10659124800 helps you compare like-for-like and choose the right storage accessories.

Last updated: February 2026

Most Kenmore refrigerators last 12 to 15 years with normal household use. For your Kenmore 10659124800 side-by-side refrigerator, regular maintenance (cleaning condenser coils, keeping door seals tight, and maintaining airflow) is what most directly determines whether it reaches the high end of that range.

Typical lifespan and what to expect

• Average: 12 to 15 years
• Often achievable with good care: 15 years
• Shortened lifespan drivers: dirty condenser coils, poor door sealing, frequent overloading, and chronic temperature swings

Condition	What you’ll notice over time	What it can lead to
Coils kept clean	Steadier temps, quieter running	Longer compressor life
Door gaskets sealing well	Less frost, less run time	Lower wear on fans and sealed system
Good airflow (not overpacked)	Faster recovery after door openings	Fewer cooling complaints
Water system maintained	Better ice and water performance	Fewer dispenser and ice maker issues

Maintenance that most extends refrigerator life

We recommend these practical habits for a Kenmore side-by-side like model 10659124800:

• Vacuum and brush condenser coils regularly (more often with pets).
• Keep door gaskets clean and check for gaps that let warm air in.
• Leave space for airflow inside the compartments; avoid blocking vents.
• Replace the water filter on schedule; for this model, the base grille filter is commonly used (see owner's manual).
• Level the refrigerator so doors close fully and consistently.

Why it matters

A refrigerator that runs longer and steadier (because coils are clean and doors seal) puts less stress on high-wear components like the evaporator fan, defrost system, and compressor. That is the difference between a unit that struggles at 10 to 12 years and one that reaches 15 years.

Last updated: February 2026

To know which Kenmore refrigerator you have, match the model number printed on the appliance’s ID tag to your paperwork. For Kenmore model 10659124800, the model tag is typically inside the fresh food compartment (often on a side wall or near the crisper area); you can also confirm it in the owner's manual.

Where to find the model number on a Kenmore refrigerator

Check these common locations first:

• Inside the refrigerator (fresh food) section on a side wall
• On the ceiling of the fresh food compartment
• Behind or beside the crisper drawers
• On the cabinet frame near the door hinge area
• On the lower front area near the base grille (varies by design)

What the model number tells you (and why it matters)

Kenmore model numbers identify the exact design and parts list for your refrigerator. That matters because parts like a water filter, ice maker, or water inlet valve can look similar but fit differently across revisions.

Quick example for Kenmore “106” models

Many Kenmore refrigerators with a 106 prefix are built to Whirlpool-style designs, so parts and troubleshooting steps often follow that platform.

How to confirm you wrote the model number correctly

Use this checklist before ordering parts:

• Copy the full number exactly as shown (all digits, no spaces)
• Take a photo of the tag for reference
• Record the serial number too (helps with production variations)
• Compare the number to your paperwork or the owner's manual

Common parts that depend on the exact model

Once you have the model number, you can match parts precisely. For model 10659124800, examples of model-specific parts include:

System	Example part on this model	What it affects
Water filtration	Genuine Kenmore refrigerator water filter EDR3RXD1	Water taste, flow, ice quality
Ice making	Refrigerator ice maker WPW10190965	Ice production
Water supply	Refrigerator water inlet valve W10408179	Water dispenser and ice maker fill

If the model tag is missing or unreadable

We use the model number to ensure fit. If the tag is damaged, check the owner's manual and any purchase or service paperwork; then compare visible features (dispenser style, shelf layout, filter location) to narrow the match.

Last updated: February 2026

Water leaking from the bottom of your Kenmore 10659124800 side-by-side refrigerator is usually caused by a defrost drain problem (meltwater cannot reach the drain pan), a water supply leak to the dispenser or ice maker, or a spill that keeps reappearing. Use the checks below to pinpoint the source; see the owner's manual for model-specific access and cleaning details.

Quick checks to find the leak source

• Look for ice or water under the freezer floor: this points to a clogged or frozen defrost drain.
• Check the dispenser area: the manual notes the dispenser tray has no drain and must be emptied; overflow can run down the door and pool below.
• Inspect the water filter seating: a recently changed filter can introduce air and cause spurting; flushing the system helps.
• Check the water line behind the refrigerator: look for kinks, loose fittings, or a slow drip.
• Watch for “one or two drops” after dispensing: that is normal; steady dripping is not.

Most common causes and what to do

What you see	Most likely cause	What we do first
Puddle after defrost, water under freezer bin	Defrost drain clogged/frozen	Clear the drain path; melt ice with warm water and remove debris
Water only near front, after using dispenser	Dispenser drip or spill tray overflow	Hold the glass 2 to 3 seconds after dispensing; empty/clean tray
Leak starts after filter change	Filter not fully seated or air in lines	Reinstall filter; flush water system for several minutes
Ice maker slow, dispenser weak, occasional leaks	Water pressure or inlet valve issue	Verify supply pressure and line condition; test valve operation

Parts that commonly fix bottom leaks on this model

If troubleshooting points to the water supply system, these parts are commonly involved:

• Refrigerator water inlet valve W10408179 (controls water flow to the ice maker and dispenser)
• Genuine Kenmore refrigerator water filter EDR3RXD1 (replace if clogged or installed incorrectly)
• Refrigerator water filter cap (black) WP2260518B (helps the filter seat and seal correctly)

Why it matters

A recurring leak can lead to ice buildup in the freezer, poor cooling airflow, and floor damage. Fixing the root cause also helps prevent dispenser and ice maker performance problems.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 10659124800 are temperature too warm or not cooling, ice maker and dispenser issues, water leaks, excess frost or moisture, and unusual noises. Our owner's manual includes a troubleshooting section with the fastest checks.

Common problems and first checks

• Not cooling or temperature too warm: reduce door openings, confirm vents are not blocked, adjust controls colder and recheck after 24 hours
• Ice maker not making ice: confirm shutoff valve is fully open, straighten any kinked water line, make sure the ice maker is ON; allow 24 hours to start and up to 72 hours for full output
• Water leaks or puddles: check for a loose water line connection, a clogged defrost drain, or an overfilled drip pan
• Moisture buildup or frost: doors left open, humid room air, or a door seal not sealing
• Noises: buzzing during ice fill and gurgling during defrost are often normal; persistent grinding points to a fan issue

Problem-to-fix guide (at a glance)

Symptom	Most likely cause	What we do first
Too warm	Doors opened often, controls set warm	Close doors fully; set colder; recheck in 24 hours
No ice	Water supply issue	Open shutoff; unkink line; confirm ice maker ON
Weak water flow	Filter restriction	Replace filter; flush several gallons
Loud fan noise	Fan blade hitting ice	Defrost and clear ice; inspect fan

Parts that often solve the issue

• Water flow or no ice: refrigerator water inlet valve W10408179
• Ice production problems: refrigerator ice maker WPW10190965
• Low flow or bad taste: genuine Kenmore refrigerator water filter EDR3RXD1

Why it matters

Fixing airflow, door sealing, and water supply problems early prevents food spoilage, repeat ice maker clogs, and unnecessary part replacement.

Last updated: February 2026