Installation guide
Owner’s manual
Error Codes
How do you reset the error code CE on a Frigidaire refrigerator?
To clear a CE (often shown as SY CE) error on your Frigidaire FRS26RLECSG refrigerator, we reset the control by unplugging the unit for about 15 minutes, then plugging it back in. This power reset often clears a temporary communication or control glitch.
- Unplug the refrigerator from the wall outlet (do not pull on the cord).
- Wait 15 minutes to let the control fully power down.
- Plug the refrigerator back into a properly grounded outlet.
- Allow a few minutes for the display to stabilize.
- Check whether the CE code returns.
A returning CE code usually means the issue is not a one-time glitch. Use these practical checks first:
- Confirm the outlet has steady power (avoid outlets controlled by a wall switch).
- Make sure the plug is fully seated in the receptacle.
- If you recently had a power outage or voltage drop, let the refrigerator run and stabilize.
- If the refrigerator is also having dispenser issues, flush the water system for a few minutes to remove air and stabilize operation.
- Review any model-specific display or alarm notes in the FRS26RLECSG owner's manual.
| Action | What it helps | What it won’t fix |
|---|---|---|
| 15-minute unplug reset | Clears temporary control/display faults | Loose wiring, failing control board, persistent communication faults |
| Power and outlet check | Prevents repeat errors caused by intermittent power | Mechanical cooling problems |
| Water system flush | Helps after new water hookup or air in lines | Electrical faults that trigger CE |
When the control senses a communication or control problem, it may limit normal operation or keep alerting you. A proper power reset is the fastest way to restore normal operation and confirm whether the problem is temporary or persistent.
If the code persists and you are planning a repair, order model-matched replacement parts from the parts list for FRS26RLECSG, or search by model on Sears PartsDirect.
Last updated: February 2026
What is the most common problem with a Frigidaire refrigerator?
The most common problem we see on Frigidaire refrigerators like model FRS26RLECSG is a cooling complaint: temperatures run too warm or the unit runs too long. The most frequent root causes are dirty condenser coils, a door gasket that leaks air, or restricted airflow from frost or a weak evaporator fan.
- Fresh food section is warm while the freezer seems colder
- Refrigerator runs “too much” or for long periods
- Frost buildup on the freezer back wall
- Ice maker output drops or cubes get smaller
- Make sure doors close fully and nothing blocks them
- Clean the condenser area (unplug first); the owner's manual lists a dirty condenser as a cause of warm temps and long run time
- Inspect and clean the door gasket; leaks force longer run times
- After changing temperature controls, wait 24 hours for temps to stabilize
| Likely cause | What you’ll notice | What to do next |
|---|---|---|
| Dirty condenser | Warm temps, long run time | Clean coils and airflow path |
| Door gasket leak | Moisture, warm spots, long run time | Clean/reshape gasket; replace if torn |
| Frost blocking airflow | Freezer wall frost, fridge warm | Check defrost system and fan airflow |
- Air leaks: refrigerator gasket 241786014
- Frost and defrost problems: refrigerator defrost bi-metal thermostat 5303918214
- Water and ice complaints that mimic cooling issues: refrigerator water inlet valve assembly 242252702
When airflow is restricted or warm air leaks in, the compressor runs longer to maintain temperature. Fixing the basic causes early helps prevent food spoilage and reduces wear on the sealed system.
For ordering, use the parts list for FRS26RLECSG or search by model on Sears PartsDirect.
Last updated: February 2026
How do I find the model number on my FRS26RLECSG?
The model number for your Frigidaire refrigerator is printed on the serial plate inside the fresh food (refrigerator) compartment. Open the refrigerator door and look along the interior walls for the rating label; it lists both the model and serial number.
- Inside the refrigerator compartment (not the freezer)
- On the side wall near the front opening
- Near the top interior wall by the control area
- On or near the crisper drawer housing area
- On a label that also shows the serial number and purchase date fields
The serial plate is a manufacturer rating label. It typically includes:
- Model number (for example, FRS26RLECSG)
- Serial number
- Electrical information (voltage/amps)
- Safety and certification markings
| You need | Why we ask for it | Where it’s found |
|---|---|---|
| Model number | Ensures diagrams and parts match your exact build | Serial plate inside refrigerator compartment |
| Serial number | Helps confirm production series for some parts | Same serial plate |
Frigidaire side-by-side refrigerators can use different door bins, water filters, ice maker parts, and gaskets across close model variations. Using the exact model number helps us match the correct parts and instructions the first time.
Once you find the model number, use it to select parts like the refrigerator filter WFCB that fit your exact configuration.
For additional label location details and how to record the information, use the FRS26RLECSG owner's manual.
Last updated: March 2026
