Kenmore Elite 10658966702 side-by-side refrigerator Parts

Kenmore Elite launched as a premium Kenmore line in 1999. For your specific Kenmore Elite side-by-side refrigerator model 10658966702, the exact build year is determined by the serial number on the appliance label; the date is not the same as the product-line launch year. See the 10658966702 owner's manual for label locations and model-specific details.

We use the refrigerator’s serial number to determine the production date.

• Check inside the fresh food compartment on the side wall near the crisper area
• Check the door jamb area (hinge side) on the refrigerator compartment
• Check behind the base grille area (if your unit has a label there)
• Check the back exterior panel near the power cord
• Write down the full model and serial number exactly as shown

Kenmore Elite refrigerators were built by different manufacturers over the years, so the serial format varies. Most commonly, the serial number includes a date code (week and year, or year and week) that identifies when the unit was made.

Knowing the manufacture year helps us match the correct water filter, ice maker, and inlet valve versions used during that production run, which reduces returns and speeds up repairs.

If you are tracking age because of water taste, slow dispensing, or filter fitment, confirm the filter style used on your unit:

• Genuine Kenmore refrigerator water filter EDR3RXD1 is a common replacement option listed for this model

Last updated: January 2026

Most Kenmore Elite refrigerators average 10 to 15 years of service life. For Kenmore Elite model 10658966702, lifespan depends most on sealed-system health (compressor and refrigerant tubing), airflow, and routine cleaning and care outlined in the 10658966702 owner's manual.

• Average: 10 to 15 years
• Often achievable with good maintenance: 15 to 20 years
• Most common life-limiting failures: sealed system (compressor), defrost system issues, control board problems, and water/ice system leaks

We see the biggest lifespan gains when these basics are done consistently:

• Keep airflow paths clear inside the refrigerator so cold air can circulate properly.
• Clean the refrigerator regularly and address spills and odors early.
• Replace the water filter on schedule and reset the filter status light when applicable.
• Watch for door seal gaps and correct door alignment if the doors do not close smoothly.
• If you have ice or water issues, start with the filter and supply checks before replacing major parts.

These parts are frequently involved in ice and water complaints on side-by-side refrigerators:

• Genuine Kenmore refrigerator water filter EDR3RXD1 for taste/odor improvement and flow restoration
• Refrigerator inlet valve W10408179 when the dispenser or ice maker is not getting water
• Refrigerator ice maker 2198597 when ice production stops and basic checks pass

Knowing the typical lifespan helps you decide when maintenance and smaller repairs make sense versus when a major sealed-system repair (compressor or refrigerant work) is more cost-effective to avoid.

Last updated: January 2026

Common problems on the Kenmore Elite 10658966702 side-by-side refrigerator include not cooling well, running too long, unusual noises, frost or moisture buildup, and ice or water dispenser issues. Many fixes start with power and control checks, airflow clearance, and basic maintenance steps in the 10658966702 owner's manual.

• Not cooling or weak cooling: controls set incorrectly, blocked vents, dirty condenser area, door not sealing, or a failed cooling component
• Runs constantly or seems to run too much: warm room, frequent door openings, large food load, or doors left ajar (high-efficiency compressors also run longer)
• Noises (buzzing, pulsating, rattling): often normal operation; buzzing can occur when the water valve opens to fill the ice maker
• Ice maker not making ice: water supply issue, inlet valve problem, ice maker failure, or freezer temperature too warm
• Water tastes/flows poorly: clogged filter or air in the water line after service

• Verify the outlet has power and the household breaker or fuse is OK.
• Confirm the refrigerator controls are turned on and set to normal temperatures.
• Allow 24 hours after installation or major temperature changes for full cooling.
• Make sure air vents inside both compartments are not blocked by food.
• Listen for the type of noise and when it happens (during ice maker fill, after door closes, etc.).

If troubleshooting points to a failed component, these are common replacements for cooling and ice/water complaints:

Cooling, airflow, and water supply problems can stack up. A simple issue like blocked circulation or a restricted filter can look like a major failure, so starting with the basic checks helps you avoid unnecessary parts and downtime.

Last updated: January 2026

Your Kenmore Elite refrigerator model 10658966702 has a total capacity of 25.6 cubic feet. That total is split between the fresh food (refrigerator) and freezer compartments; you can confirm the exact breakdown in the 10658966702 owner's manual.

Use these numbers when comparing replacement refrigerators, planning kitchen storage, or checking whether the unit is being overpacked.

• Total capacity: 25.6 cu. ft.
• Fresh food (refrigerator) capacity: 15.42 cu. ft.
• Freezer capacity: 10.18 cu. ft.
• Capacity is a rated volume; usable space changes with shelves, bins, and the ice system installed.

Capacity helps you set realistic storage expectations and avoid airflow problems. Overpacking either side can block vents, leading to warm spots, slow ice production, and uneven temperatures.

Last updated: January 2026