Kenmore 79575282401 bottom-mount refrigerator Parts

For Kenmore model 79575282401, the model number by itself usually does not state the exact cubic-foot capacity. The most reliable way is to look up the capacity in the specifications section of the 79575282401 owner's manual, or calculate it from the interior measurements.

The capacity is typically listed with other specifications (electrical requirements, features, and setup info). Use the 79575282401 owner's manual and look for a “Specifications” or “Product dimensions/capacity” section.

If you cannot find the spec quickly, you can estimate total capacity by measuring the usable interior space.

• Empty the compartment you are measuring (fresh food or freezer)
• Measure width, height, and depth in inches (inside wall to inside wall)
• Multiply: W x H x D = cubic inches
• Convert: cubic inches ÷ 1728 = cubic feet
• Repeat for freezer and refrigerator sections, then add them together

• Measure to the inside surfaces, not the outside cabinet
• Exclude obvious “non-usable” space (large air channels, thick interior housings)
• Measure shelves/drawers removed if they block access, then reinstall
• If your model has a large ice bin or icemaker housing, measure around it for usable space
• Round to the nearest tenth; published capacities are often rounded

Cubic feet helps you compare storage space, choose the right refrigerator organization parts, and set realistic expectations for how much food the fresh food section and bottom freezer can hold.

Last updated: February 2026

On Kenmore bottom-mount refrigerator model 79575282401, a “bad compressor” usually shows up as no cooling with the unit trying to start (clicking/humming) and then stopping, or running unusually long without reaching temperature. First rule out normal operating sounds and simple power or airflow issues using the 79575282401 owner's manual.

These steps catch the most common non-compressor causes of warm temperatures.

• Confirm the refrigerator has power and is not set to OFF.
• Listen for normal clicks (defrost timer/thermostat cycling) and fan sounds; these can be normal.
• Make sure doors close fully and the gasket seals all the way around.
• Verify proper airflow: do not block vents; allow space around the cabinet for circulation.
• Check for heavy frost buildup on the freezer back wall (often points to a defrost problem, not the compressor).
• Clean dust from condenser coils (dirty coils can make the compressor run longer).

A compressor can be fine but unable to start because the start device is failing.

On this model, cooling complaints are often tied to airflow or defrost components. If you see frost buildup or poor airflow, these parts are common suspects:

• Refrigerator defrost heater 5300JB1100J
• Refrigerator defrost sensor assembly 6615JB2005C
• Refrigerator thermistor 6500JB2002T
• Refrigerator sensor 6500JB2001B
• Refrigerator condenser fan 4680JK1001B

Replacing a compressor or sealed-system component is a major repair. Using the troubleshooting steps in the manual helps confirm whether you have a true compressor failure or a more common issue like defrost frost buildup, restricted airflow, or a sensor problem.

Last updated: February 2026

Your Kenmore refrigerator’s model number is printed on the identification label inside the fresh food (refrigerator) compartment. For Kenmore model 79575282401, the label location is typically on the right-hand side wall of the refrigerator compartment; match the full number exactly to look up the correct parts and manual in our owner's manual.

Check these common spots first (use a flashlight and look for a sticker or metal plate):

• Right-hand side wall inside the refrigerator compartment (most common for this model family)
• Upper side wall near the front opening
• Ceiling area inside the fresh food section
• Behind or beside the crisper drawers (remove drawers to see the liner)
• Along the door liner near the hinge side

Record both numbers exactly as shown on the label.

• Model number (example: 79575282401) identifies the exact design and parts list
• Serial number helps match production changes and service information
• Date of purchase is useful for your records and maintenance history

• Copy the model number character-for-character (no spaces added)
• Take a clear photo of the label for future reference
• Use the model number when ordering parts like a door switch, thermistor, or water inlet valve

Kenmore uses different number series; the first 3 digits are often used to group designs.

Using the exact model number prevents ordering the wrong refrigerator parts (gaskets, sensors, shelves, or control components) and helps you follow the correct procedures for door alignment, control settings, and troubleshooting.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 79575282401 are temperature problems (too warm or too cold), ice maker complaints, water leaks, excess frost, and unusual noises. Many of these trace back to airflow, control settings, door sealing, or defrost and fan components; use the owner's manual troubleshooting guide to narrow it down.

• Not cooling or warm refrigerator section: blocked air vents, doors opened often, dirty condenser coils, evaporator fan or sensor issues
• Freezer too warm or slow ice production: freezer control set too warm, heavy ice usage, vents blocked by food
• Water leaking or puddles: defrost drain issues, water line connection problems, inlet valve or tubing leaks
• Excess frost/ice buildup: defrost system problem (heater or defrost sensor), door not sealing
• Noisy operation: normal operating sounds, condenser fan issues, evaporator fan blade rubbing

• Confirm controls are set correctly; adjust refrigerator first, then wait 24 hours before changing the freezer setting.
• Make sure air vents are not blocked by packages or bins.
• Check doors close fully; clean sticky gaskets and the surfaces they touch.
• Clean condenser coils (dust buildup commonly causes poor cooling and longer run times).
• For ice maker issues, allow 24 hours after hookup for ice production and discard early batches if taste is off.

A refrigerator can look like it has a “major” failure when the real cause is simple (blocked airflow, control settings, or a door seal). Starting with the basic checks prevents unnecessary part replacement and helps protect food temperatures.

If your display is showing an error, use our Kenmore 795 model bottom freezer refrigerator error codes guide to match the code to the most likely system (cooling, defrost, fan, or sensors).

Last updated: February 2026