Kenmore
Electronic Sewing Machine

Model #38519606400 Kenmore sewing machine

Here are the diagrams and repair parts for Kenmore 38519606400 sewing machine, as well as links to manuals and error code tables, if available.

There are a couple of ways to find the part or diagram you need:

  • Click a diagram to see the parts shown on that diagram.
  • In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

Owner’s manualError Codes

    Showing 10 of 314 parts

    Supporter-r#6

    Slide plate set / zz rod Diagram

    Supporter-r

    Part #825015010

    The manufacturer no longer makes this part, and there's no substitute part

    Volume Slide#27

    Front panel/slide volume Diagram

    Volume slide

    Part #653507163

    The manufacturer no longer makes this part, and there's no substitute part

    Hinge#24

    Top cover/handle Diagram

    Hinge

    Part #366501102

    The manufacturer no longer makes this part, and there's no substitute part

    Sewing Machine Needle Bar Position Sensor#3

    Front set plate/needlebar supporter Diagram

    Sewing machine needle bar position sensor

    Part #843502004

    The manufacturer no longer makes this part, and there's no substitute part

    Crank#18

    Feed rock shaft unit Diagram

    Crank

    Part #825261002

    The manufacturer no longer makes this part, and there's no substitute part

    Switch#35

    Stepping motor (zz) unit Diagram

    Switch

    Part #848032003

    The manufacturer no longer makes this part, and there's no substitute part

    Tension Release Lever#42

    Slide plate set / zz rod Diagram

    Tension release lever

    Part #827022005

    The manufacturer no longer makes this part, and there's no substitute part

    Sewing Machine Blind Hem Foot#6

    Accessory set Diagram

    Sewing machine blind hem foot

    Part #820817015

    The manufacturer no longer makes this part, and there's no substitute part

    Arm Leg Unit#31

    Stepping motor feed unit Diagram

    Arm leg unit

    Part #828613002

    The manufacturer no longer makes this part, and there's no substitute part

    Cover#39

    Top cover/handle Diagram

    Cover

    Part #659601007

    The manufacturer no longer makes this part, and there's no substitute part

    Symptoms common to all sewing machines

    Choose a symptom to see related sewing machine repairs.

    Main causes: dirty shuttle race, wrong thread tension, bad needle timing, damaged needle, using the wrong type of needle
    Main causes: machine needs lubrication, internal gear failure
    Main causes: dirty shuttle race, improper thread routing, incorrect thread tension
    Main causes: lack of lubrication, lint buildup, worn drive belt, faulty drive motor
    Main causes: problems with the feed dogs, setting stitch length to 0
    Main causes: disengaged clutch, broken drive belt, internal drive gear failure
    Main causes: thread bunched up in the shuttle race, bad needle timing, internal drive gear failures
    Main causes: faulty foot pedal, locked drive gears, wiring failure, bad drive motor
    Main causes: power supply failure, bad power cord, faulty On/Off switch

    Repair guides common to all sewing machines

    These step-by-step repair guides will help you safely fix what’s broken on your sewing machine.

    April 1, 2015
    By Lyle Weischwill
    How to replace a sewing machine on/off switch

    If the sewing machine is completely dead, replace the On/Off switch using these 6 steps.

    Repair difficulty
    Time required
     30 minutes or less
    April 1, 2015
    By Lyle Weischwill
    How to replace a sewing machine drive belt

    You can replace a broken sewing machine drive belt in about 15 minutes.

    Repair difficulty
    Time required
     15 minutes or less
    April 1, 2015
    By Lyle Weischwill
    How to replace a sewing machine drive motor

    If the drive motor on your sewing machine runs roughly or doesn't run at all, you can replace it in about 30 minutes using these simple steps.

    Repair difficulty
    Time required
     15 minutes or less

    Articles and videos common to all sewing machines

    Use the advice and tips in these articles and videos to get the most out of your sewing machine.

    June 29, 2022

    Top questions about Sears and Sears PartsDirect

    By Sears PartsDirect staff

    Get answers to frequently asked questions about Sears and Sears PartsDirect.

    January 18, 2016

    How to use a multimeter to test electrical parts video

    By Sears PartsDirect staff

    Learn how to use a multimeter to check for wiring problems in an appliance that's not working

    April 1, 2015

    Sewing machine common questions

    By Sears PartsDirect staff

    These answers to common questions can help you make the most of your sewing machine.