Kenmore 79551013010 refrigerator Parts

Kenmore side-by-side refrigerator model 79551013010 falls in the typical 20 to 26 cu. ft. range for this style; the exact cubic feet for your unit is listed on the model and serial label and in the specifications section of the 79551013010 owner's manual.

Check these spots so you get the correct number for your exact unit:

• Look for the model and serial label inside the fresh food compartment (often on a side wall).
• Confirm the model number reads 79551013010.
• Find a line that says capacity, total volume, or lists refrigerator and freezer volumes.
• If capacity is shown in liters (L), convert to cubic feet using the table below.
• Use the confirmed capacity when planning cabinet fit and when comparing storage space across Kenmore side-by-side models.

Capacity affects how much food you can store, but it also impacts real-world performance factors like how quickly temperatures recover after door openings and how you organize airflow around shelves and bins.

Last updated: February 2026

Kenmore model numbers are read left to right; the first 3 digits identify the manufacturer source, and the remaining digits narrow down the product design and version. For your Kenmore side-by-side refrigerator, the full model number is 79551013010, and the 795 prefix is the key identifier.

The first three digits are the fastest way to interpret a Kenmore model number because they point to the manufacturing source used for parts lookup.

• 795: refrigerator model family used for many Kenmore-built-by-LG designs
• The next digits: series and feature set (cabinet, dispenser, controls)
• The last digits: engineering revision or color/trim variation
• The full model number: what we use to match the correct parts list and diagrams

On Kenmore 79551013010, the identification label is located inside the fresh food (refrigerator) compartment on the right-hand side. Confirming the full number prevents ordering the wrong door bin, gasket, or control.

• Open the refrigerator door and look along the right interior wall
• Write down both model and serial numbers
• Match every digit; one missing digit can change the parts list
• Use the label info when referencing diagrams or ordering parts

Reading the model number correctly helps us match the right components the first time, especially for dispenser and water system repairs. For example, a water leak or no-water issue can involve the refrigerator water inlet valve 5221JA2006D or the refrigerator water tank MJM61904702, and those parts must match the exact model.

For model-specific locations, feature descriptions, and setup details (including water line connection and filter instructions), use the 79551013010 owner's manual.

Last updated: February 2026

To replace the water filter in your Kenmore 79551013010 side-by-side refrigerator, remove the old filter (or substitute cap), install the new filter with a quarter-turn to lock, then flush about 2.5 gallons of water and reset the filter indicator on the dispenser. See the 79551013010 owner's manual for the exact filter location and steps.

• Turn off the ice maker (optional) and have a towel ready for a few drips.
• Remove the old filter or remove the filter substitute cap by turning it counterclockwise about a quarter turn and pulling it down.
• Remove the red cap from the new filter.
• Insert the two tabs on the filter tip into the two slots in the filter receptacle.
• Turn the filter to the right (clockwise) a quarter turn to lock; the lock symbol should line up with the indicator arrow.
• Turn the household water supply back on (if you shut it off) and check for leaks.

After installing the filter, we recommend purging air and carbon fines from the line.

• Dispense 2.5 gallons (9.46 L) of water total.
• Use an on/off pattern: 30 seconds ON, 60 seconds OFF.
• Check the shelf and filter housing area for leaks during and after flushing.
• Press and hold FILTER RESET for 3 seconds to turn off the filter status light.

Most water filters in this style of Kenmore refrigerator need replacement about every 6 months, or sooner if water flow slows or taste and odor change.

A properly installed and flushed water filter helps protect the water inlet valve and dispenser system, improves water quality, and prevents leaks caused by leaving the housing uncapped.

Last updated: February 2026

The Kenmore side-by-side refrigerator model 79551013010 is 35 3/4 inches wide (35.75 inches). For installation planning, we also recommend confirming the “overall width” with handles and allowing clearance for door swing; see the 79551013010 owner's manual.

Refrigerator width can be listed in a few different ways. Use the one that matches your goal.

• Cabinet width: the metal case only (best for fitting between cabinets)
• Overall width: widest point with doors and handles
• Door swing clearance: extra space needed so doors open fully
• Airflow clearance: space around the unit so it cools correctly

Use a tape measure and record two numbers.

• Measure cabinet width: left case edge to right case edge
• Measure overall width: include the handle side if it sticks out
• Check door swing: open doors to your normal use angle and confirm they clear walls/cabinets
• Verify the unit is level; a tilted cabinet can change how doors sit and swing

A tight fit can limit door opening and reduce airflow around the condenser and cabinet; that can lead to warmer temperatures, longer run times, and more frost or ice maker complaints.

Last updated: February 2026

A Kenmore refrigerator typically lasts 10 to 15 years. For the Kenmore 79551013010 side-by-side, regular care like cleaning, keeping doors sealing tightly, and addressing cooling or ice maker issues quickly is what most often determines whether it reaches the high end of that range.

Most refrigerators fail early due to heat buildup, airflow restrictions, or water and ice system wear. We see the longest life when these basics are kept up.

• Keep condenser and rear airflow areas clean and unobstructed
• Limit frequent door openings and avoid overpacking shelves
• Keep door gaskets clean so doors shut firmly
• Replace water filters on schedule to protect the water system
• Fix unusual noises, warm temps, or leaks promptly

The care and cleaning guidance in the 79551013010 owner's manual is the best reference for model-specific cleaning and handling.

• Clean interior surfaces and spills before odors and corrosion start
• Inspect door gaskets for gaps, tears, or sticky residue
• Confirm doors close firmly after loading groceries
• Plan for power interruptions and vacations (ice maker off when appropriate)

It is normal for the compressor to run a lot, especially after adding food, during hot weather, or right after plugging the refrigerator in (cooldown can take up to about 24 hours).

A refrigerator that runs hotter or longer than necessary wears the compressor and fans faster, and small issues (like a weak door seal or restricted airflow) can shorten lifespan by years.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 79551013010, the model number is printed on the identification label inside the fresh food (refrigerator) compartment; it is located on the right-hand side wall. For the exact label location and what the tag looks like, use the 79551013010 owner's manual.

• Open the refrigerator (fresh food) door, not the freezer door
• Look along the right interior wall of the refrigerator compartment
• Check near the front edge where the door gasket meets the cabinet
• Use a flashlight; the label can be small and easy to miss
• Write down both the model number and the serial number for parts lookup and service

The identification label typically includes these fields:

We use the model number to match your refrigerator to the correct Kenmore parts list (for example, the right water inlet valve, door gasket, or control board). Even small model-number differences can change which parts fit.

Last updated: February 2026

Kenmore is a brand name sold by Sears, and the 795 model prefix is commonly associated with LG-built Kenmore refrigerators. For the most accurate identification for your exact 79551013010 unit, we recommend checking the manufacturer details and labeling shown in the 79551013010 owner's manual.

Use these quick checks on your Kenmore 79551013010:

• Look for the model and serial label inside the fresh food compartment (typically on the right-hand side)
• Match the full model number and any additional codes on the label
• Check the manual cover pages and product identification sections
• Compare replacement part styles when servicing items like the ice maker, dispenser, or control boards
• If you are ordering parts, always use the full model number to avoid mismatches

Kenmore is the retail brand; the actual refrigerator is manufactured by a partner company. Many Kenmore refrigerators were produced by major manufacturers (such as LG, Whirlpool, and others) depending on the model series and time period.

Knowing the actual manufacturer helps when you are troubleshooting cooling issues, diagnosing dispenser problems, or selecting the correct replacement parts for systems like the water inlet valve, auger motor, and electronic control board.

Last updated: February 2026