GE JBC16G*F1 electric freestanding range Parts

To order replacement parts for your GE JBC16G electric freestanding range, we use the model-specific parts list to match the exact component you need, then place the order from the part page. Common order-ready items for this model include the range bake element WB44X5082 and range oven light bulb 40A15.

How we recommend ordering parts (fastest and most accurate)

• Confirm the full model number on the range’s ID tag and match it to JBC16G.
• Identify the failed part by symptom (no heat, uneven baking, burner not heating, light out).
• Choose the exact part listing for your model (part ID matters).
• Double-check electrical parts by appearance and terminal style before ordering.
• Order the part and keep your old part until the repair is complete.

Popular parts for GE JBC16G (examples)

Symptom	Likely part	Part ID to look for
Oven not baking	Range bake element	WB44X5082
Oven light out	Range oven light bulb	40A15
Surface burner not heating	Range coil surface element, 8-in	WB30X348
Burner cycles wrong or won’t regulate	Range surface element control switch	WB21X36771

Why it matters

GE ranges often use similar-looking components across model families, but wiring terminals, wattage, and mounting details can differ. Ordering by the correct JBC16G part ID helps prevent wrong-part returns and gets your range back to safe, consistent heating faster.

Last updated: February 2026

For a GE electric freestanding range like model JBC16G, replacing the oven control board typically runs $100 to $300 for the part, and about $220 to $550 total if you pay for professional installation. The exact price depends on the specific board used in your range and local labor rates.

What changes the price the most

• Your exact model and revision (control boards vary by version)
• DIY vs. technician install (labor is often the biggest add-on)
• Whether the failure is the board or a related part (wiring, terminal connections, sensor)
• Shipping/availability and whether the board is new or rebuilt
• Extra service work (diagnosis fee, calibration, or wiring repair)

Typical cost breakdown

Item	Typical range	Notes
Control board (part only)	$100 to $300	Some boards cost more on certain versions
Labor (if not DIY)	$100 to $200	Often plus a trip/diagnostic fee
Total installed	$220 to $550	Varies by region and complexity

Before you buy a control board

A “dead” oven or erratic temperature is sometimes caused by power or wiring issues, not the board. On electric ranges, we check these first:

• Confirm the range has 240V power (a half-tripped breaker can leave you with only 120V)
• Inspect the power cord connection and burn marks at the terminal block
• Look for loose or overheated wires behind the back panel
• If the oven heats poorly, test the bake element and broil element for continuity
• If a surface burner is the issue, test the burner and the surface element control switch

Helpful parts commonly involved in “no heat” or power-connection problems include the range terminal block WB17X5095 and the range bake element WB44X5082.

Why it matters

Control boards are one of the higher-cost range repairs. Spending a few minutes confirming power, wiring, and heating elements helps you avoid replacing an expensive board when the real issue is a terminal connection, element, or switch.

Last updated: February 2026

For your GE electric freestanding range model JBC16G, the right part number comes from matching the full model number to the parts list and diagram, then selecting the exact component name and ID shown for that model (for example, a bake element or surface element).

Step-by-step: how we recommend finding the correct part

• Confirm the model number on the range’s ID tag (commonly on the oven frame behind the door, the storage drawer frame, or the back panel).
• Use the model number JBC16G to view the model-specific parts breakdown.
• Identify the system first (oven, cooktop, control panel, wiring).
• Match the part by name + part ID (not just by appearance).
• Compare details like size, terminal style, and mounting points before ordering.
• If multiple similar parts appear, match by where it installs and what it connects to.

Common parts people search for on this model

These are examples of model-matched parts available for JBC16G; use them as a reference point when you are identifying what failed:

What you’re fixing	What to look up	Example part on this model
Oven not heating in bake	Bake element	Range bake element WB44X5082
Broil not working	Broil element	Broil unit WB44X173
One burner not heating	6-inch or 8-inch surface element	Range surface element, 6-in WB30X342
Oven light out	Appliance light bulb	Range oven light bulb 40A15
Burnt power connection	Terminal block	Range terminal block WB17X5095

Why it matters

GE ranges often use multiple similar-looking elements, knobs, and electrical parts across different revisions. Matching the exact model number and then selecting the exact part ID prevents wrong-fit returns and helps ensure safe electrical connections.

Quick tip for faster matching

If you are unsure whether you need an element, switch, or wiring repair, start by confirming symptoms and doing basic electrical checks with the right tools. Our DIY guide how to use a multimeter to test electrical parts video helps you test components before you order.

Last updated: February 2026

For a GE electric freestanding range like model JBC16G, the most commonly replaced parts are the heating parts that take the most heat and wear: surface elements, oven elements, light bulbs, and control knobs or switches. On this model, those match parts like the range bake element WB44X5082 and range oven light bulb 40A15.

Most common replacement parts (and what they affect)

• Surface heating: coil surface elements, trim rings, and the surface element control switch
• Oven heating: bake element and broil element
• Visibility: oven light bulb
• Controls: knobs (timer/thermostat) and indicator light lens
• Heat sealing: oven door gasket and door glass pads/spacers

Common symptoms and the part to check first

Symptom	Most likely area	Example part on this model
One burner will not heat	Surface element or switch	Range surface element, 6-in WB30X342 or range surface element control switch WB21X36771
Oven will not bake evenly or won’t heat	Bake circuit	Range bake element WB44X5082
Broil won’t work	Broil circuit	Broil unit WB44X173
Oven light is out	Bulb	Range oven light bulb 40A15
Heat leaks, long preheat times	Door seal	Range oven door gasket WB2X1522

Quick checks we recommend before ordering

• Kill power at the breaker before inspecting anything electrical.
• For a dead surface burner, swap the coil with a same-size burner to see if the problem follows the element.
• Look for blistering, cracks, or burn spots on bake and broil elements.
• If the element looks good, test the circuit with a meter; use our how to use a multimeter to test electrical parts video.
• If you see scorched wiring or loose connections, address that before installing a new part.

Why it matters

Replacing the correct wear part restores safe, consistent heating and helps prevent repeat failures caused by loose terminals, heat damage, or a failing control switch.

Last updated: February 2026

On a GE electric freestanding range like model JBC16G, “161” is not a standard, universal GE range error code. In real use, it’s usually the clock/timer display showing a setting, a stuck input, or a momentary power/control glitch rather than a specific “failure code.”

What “161” commonly indicates on a range display

• A timer or clock mode is active and the display is showing a value (minutes or a setting).
• A knob or switch is not fully in the OFF position and is feeding an input to the control.
• A brief power interruption caused the display to come back in an odd state.
• Less commonly, a control input is sticking (mechanical knob or electrical switch).

Quick checks we recommend (safe, no tools)

• Press CLEAR/OFF (if your control panel has it) and cancel any timer or cook time.
• Turn all knobs fully to OFF; rotate the clock/timer knob through its range and back to OFF.
• Reset power at the breaker for 1 minute, then restore power and set the clock.
• If “161” appears only when you touch a specific knob, focus on that control.

When to inspect parts (power off)

If the number returns repeatedly or the range acts erratically (beeping, heat won’t shut off, burner won’t regulate), inspect the related control and wiring with power disconnected.

Symptom you notice	Most likely area	What to do next
Display changes when you touch the timer knob	Timer/knob mechanism	Check fit and movement; replace the knob if it’s loose: range clock timer knob WB3X5699
Burner heat is stuck high/low	Surface element control	Inspect the switch and wiring; test with a meter if needed: how to use a multimeter to test electrical parts video
Intermittent power, heat marks near cord connection	Power connection	Inspect for overheating; replace damaged connection parts: range terminal block WB17X5095

Why it matters

A display that won’t clear or controls that feel “stuck” can lead to overheating, no-heat, or a burner that won’t regulate. Addressing the control input or power connection early prevents bigger electrical problems.

Last updated: February 2026