Error Codes
Does KitchenAid make a 33 inch wide refrigerator?
Yes. KitchenAid makes 33-inch-wide refrigerators, but your KitchenAid KSSC42QMS03 is a built-in side-by-side model that’s typically wider than 33 inches. If you’re shopping by width, confirm the exact cabinet opening and door-swing clearance before choosing a replacement.
When you’re targeting a 33-inch-wide refrigerator, we recommend checking these measurements first:
- Cabinet opening width (wall-to-wall at the front and back)
- Depth (counter-depth vs full-depth) and whether doors will protrude
- Hinge and handle clearance (space needed to fully open doors)
- Height to the soffit or upper cabinet (built-ins often have tight height limits)
- Water line location (for ice maker and water dispenser hookups)
A 33-inch-wide unit is usually a freestanding refrigerator size class. Built-in models like KSSC42QMS03 are designed around a dedicated enclosure and often use different ventilation and trim requirements.
| Feature | 33-inch freestanding (typical) | KSSC42QMS03 built-in (typical) |
|---|---|---|
| Installation | Slides into kitchen space | Fits a built-in enclosure |
| Ventilation | Rear/bottom clearances | Often front-vented design |
| Fit sensitivity | Moderate | High |
Choosing by “33-inch wide” alone can lead to door interference, poor airflow, or a refrigerator that will not seat correctly in the opening. Getting the opening and clearance measurements right prevents return hassles and cooling performance issues.
If your goal is to keep KSSC42QMS03 running, you can order model-matched parts from the list for this refrigerator, or search by model number on Sears PartsDirect. Common maintenance items include the refrigerator filter EDR5RXD1.
Last updated: February 2026
How many cubic feet is a KitchenAid Superba refrigerator?
KitchenAid Superba refrigerator capacity depends on the exact model; for the built-in KitchenAid KSSC42QMS03, the total cubic feet is a model-specific specification that you confirm from the rating label inside the refrigerator or the product spec sheet for that exact unit.
Built-in side-by-side refrigerators like KSSC42QMS03 are commonly designed for high-end cabinetry fit and insulation; that design often trades some interior volume for a flush, built-in installation.
- Built-in cabinets and thicker insulation can reduce usable interior space
- In-door ice and water features take up room in the freezer door area
- Air channels and covers (evaporator area) reduce “box” space but improve airflow
- Shelf and bin layout changes how much you can actually store
Use these checks in order; they work for most KitchenAid built-in refrigerators.
- Look for the model and serial tag inside the fresh food compartment (side wall or ceiling area)
- Check for a rating label or product data label that lists “Total volume” or “Capacity”
- If you are comparing configurations, note whether your unit uses an internal water filter such as the refrigerator filter EDR5RXD1; filtration and dispenser layouts can change usable storage
| Term | What it includes | What it does not tell you |
|---|---|---|
| Total capacity (cu. ft.) | Fresh food plus freezer interior volume | How shelves, bins, and ice systems affect usable space |
| Usable storage | What you can practically fit | Not a standardized published number |
Cubic feet is helpful for remodel planning and comparing refrigerators, but usable space is strongly affected by ice maker, dispenser, and airflow components.
To order replacement parts for KSSC42QMS03, use the parts list for your model or search by model number on Sears PartsDirect.
Last updated: February 2026
Why is the water dispenser not working on my KitchenAid side by side refrigerator?
On KitchenAid model KSSC42QMS03, a water dispenser usually stops working because the water supply is restricted (clogged filter, kinked line, trapped air) or the dispenser controls are not actuating (switch or lever issue). Start with the filter and simple flow checks before testing electrical parts.
- Confirm the household shutoff valve is fully open.
- Check the water line behind the refrigerator for kinks or pinches.
- Dispense water for 2 to 3 minutes total (in intervals) to purge air after a filter change.
- If flow is weak, remove and reinstall the filter to ensure it is fully seated.
- If the dispenser paddle feels loose or does not “click,” inspect the lever and switch area.
A clogged or incorrectly installed filter can block flow and make the dispenser seem dead.
- Replace the filter if it is overdue or flow has gradually slowed.
- Inspect the filter cap for damage or poor fit; a bad seal can cause leaks and pressure loss.
Helpful parts for this model:
For step-by-step filter replacement guidance, use: how to replace the water filter in a KitchenAid refrigerator
If you hear no click and the dispenser does nothing, the switch may not be closing when you press the paddle.
- Check for ice buildup or debris around the dispenser lever.
- Inspect the lever retainer for cracks or a lever that is not returning.
- If the switch is intermittent, replacement is a common fix.
Parts that commonly relate to this symptom:
| What you observe | Most likely direction | What to do next |
|---|---|---|
| No water and no sound/click | Dispenser actuation issue | Inspect lever/retainer; test/replace switch |
| Hums/clicks but no water | Water supply restriction | Replace filter; check line kinks; purge air |
| Weak flow that worsens over time | Filter restriction | Replace filter; verify filter cap seal |
A restricted water path can strain the water system and reduce ice maker performance, while a bad dispenser switch can make the dispenser appear “dead” even when water pressure is fine.
You can order replacement parts for KSSC42QMS03 from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
