Kenmore Elite 59678573802 refrigerator Parts

Most Kenmore Elite refrigerators, including model 59678573802, typically last 10 to 15 years with normal household use. Regular care (cleaning, good door sealing, and stable temperatures) helps you reach the high end of that range and reduces costly cooling-system strain.

Typical lifespan and what affects it

A refrigerator’s life is mostly determined by how hard the sealed system and airflow components have to work.

• Condenser coil cleanliness: dusty coils raise compressor run time and heat
• Door gasket condition: air leaks cause longer run times and frost/moisture issues
• Airflow inside the cabinet: blocked vents can warm sections and overwork the evaporator fan
• Water and ice system upkeep: clogs and low water flow can create repeated ice maker problems
• Power interruptions: frequent outages or surges can stress controls and motors

Maintenance that helps you hit 15 years

Use the care and cleaning guidance in the 59678573802 owner’s manual and stick to a simple routine.

Maintenance task	Good interval	Why it matters
Clean condenser area	Every 6 to 12 months	Lowers compressor heat and run time
Inspect/clean door gaskets	Every 3 to 6 months	Prevents warm air leaks and moisture
Confirm temps (fresh food/freezer)	Monthly	Catches cooling drift early
Keep vents clear of food packages	Weekly	Maintains even cooling and airflow

When “end of life” is approaching

These symptoms often show up in the last few years of service life and usually point to cooling or airflow problems.

• Refrigerator warms even though it “runs” a lot
• Freezer frost buildup returns quickly after defrosting
• Loud fan noise or intermittent airflow (evaporator area)
• Water under the unit or recurring drain icing
• Ice maker stops producing consistently

If you’re troubleshooting ice production, our common refrigerator ice maker problems and solutions guide helps you narrow down whether the issue is water supply, the ice maker, or temperature.

Why it matters

Knowing the typical 10 to 15 year lifespan helps you decide whether to invest in repairs (like a control, fan motor, or ice maker) versus planning a replacement, especially when cooling performance becomes inconsistent.

Last updated: January 2026

To raise a Kenmore Elite refrigerator model 59678573802 off the floor, remove the base grille and adjust the front rollers or leveling screws at the base until the cabinet lifts slightly and the doors close smoothly. Follow the step-by-step procedure in the 59678573802 owner's manual.

Steps to raise the cabinet safely

• Remove the base grille by gripping it firmly and pulling it toward you.
• Identify your front adjustment style:
  • Style 1: adjustable rollers with roller adjustment screws
  • Style 2: leveler foot screws (leveling screws)
• Have a helper push gently against the top of the refrigerator to reduce weight on the adjusters.
• Turn the adjusters to raise the front:
  • Style 1: turn the roller adjustment screw to the right to raise.
  • Style 2: turn the leveling screw clockwise to raise.
• Recheck door closing; if needed, tilt slightly more to the rear by turning both sides the same amount.
• Reinstall the base grille.

Which tool do I need?

Adjustment type	Where it is	Tool size	Direction to raise
Style 1 (rollers)	Front base	3/8-inch hex driver	Right
Style 2 (levelers)	Front base	1/4-inch hex driver	Clockwise

Why it matters

Raising and leveling the cabinet helps the doors seal correctly, improves door closing, and prevents the refrigerator from rocking. On models with a freezer drawer, setting the brake foot firmly against the floor also helps keep the unit from rolling forward.

Last updated: January 2026

Common problems on the Kenmore Elite refrigerator model 59678573802 include weak or no cooling, frost buildup, water leaks, ice maker or dispenser issues, and unusual noises. Most fixes start with cleaning, checking airflow and door sealing, then testing key components listed in the 59678573802 owner’s manual.

Most common symptoms and what usually causes them

• Not cooling or warm temperatures: dirty condenser coil, failed evaporator fan motor, or a control problem
• Frost or ice buildup: door not sealing, frequent door openings, or a defrost system issue
• Water puddles under the refrigerator: clogged/iced drain path or a drain tube problem
• Ice maker not making ice: water supply issue, inlet valve problem, or ice maker failure
• Buzzing, clicking, or rattling: fan blade hitting ice, failing compressor start components, or vibration from tubing/pan

Quick checks we recommend before replacing parts

1. Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
2. Make sure vents inside both compartments are not blocked by food packages.
3. Clean condenser area (dust buildup can cause poor cooling and longer run times).
4. Inspect door gaskets for gaps, tears, or areas that do not grip the cabinet.
5. If you see water, check for ice in the drain area and confirm the drain path is open.

Parts that commonly solve these problems on this model

Symptom	Part to consider	What it affects
Warm fridge/freezer, noisy airflow	Refrigerator evaporator motor W11024089	Circulates cold air through the compartments
Rattling or scraping fan noise	Refrigerator evaporator fan blade WP2169142	Fan balance and clearance
No ice, slow fill, no water flow	Refrigerator water inlet valve assembly WP2315576	Water supply to ice maker and dispenser
Leaks inside or under unit	Refrigerator drain tube W10619951	Routes defrost water to the drain pan

Why it matters

Catching airflow, sealing, and drain issues early helps prevent food spoilage, heavy frost that restricts cooling, and water damage on floors. The troubleshooting section in the 59678573802 owner’s manual is a strong starting point for symptom-based checks.

Last updated: January 2026

Kenmore Elite launched as a premium Kenmore line in the late 1990s; the exact build year of your Kenmore Elite refrigerator model 59678573802 depends on its serial number, not the Elite name. We use the serial tag on the cabinet to identify the manufacture date for your specific unit.

How to find the manufacture year on model 59678573802

Check the serial number label first; on bottom-mount refrigerators it’s commonly inside the fresh food compartment on a side wall, near the crisper area, or on a frame edge.

• Locate the model and serial label inside the refrigerator compartment
• Write down the full serial number exactly as shown
• Compare the serial format to the date-code chart in the 59678573802 owner’s manual
• If the label is worn, take a clear photo with the door open and the light on
• Use the decoded year to choose the right parts and troubleshooting steps

Why the serial number matters (more than the “Elite” name)

“Kenmore Elite” identifies a feature tier, but parts, wiring, and control styles change across production runs. The serial-based manufacture year helps match the correct refrigerator electronic control, ice maker, and door gasket style.

Quick examples of what the year can affect

What you’re doing	Why the build year helps	Common symptom if mismatched
Replacing a control board	Connectors and programming can vary	Cooling issues or error codes
Replacing an ice maker	Mounting and harness style can differ	No ice or leaking fill
Replacing a door gasket	Color/fit and door revision can change	Frost, sweating, warm spots

Related parts customers often replace on this model

If you’re dating the unit because you’re planning a repair, these are common service items for model 59678573802:

• Refrigerator ice maker D7824706Q (no ice, small cubes)
• Refrigerator water inlet valve assembly WP2315576 (no water to ice maker/dispenser)
• Refrigerator temperature sensor 12002355 (temperature swings)
• Refrigerator evaporator fan blade WP2169142 (noise, weak airflow)

Why it matters

Knowing the correct manufacture year helps us avoid ordering the wrong Kenmore-compatible part and speeds up troubleshooting for cooling, ice and water, and door seal problems.

Last updated: January 2026