Maytag A512 washer/dryer Parts

The most common problems we see with the Maytag A512 washer/dryer are no start or no spin (often a lid switch issue), leaking or slow fill (inlet valve or hoses), and squealing or weak agitation/spin (worn belts or motor mounting parts). These failures are typical wear items on this style of washer.

Common symptoms and the parts that usually cause them

• Washer will not start, stops mid-cycle, or will not spin: lid switch W10820036
• Slow fill, no fill, or water keeps running: washer water inlet valve 205613
• Squealing, burning rubber smell, weak spin, or tub not turning: washer drive belt 12112425
• Drain problems or water left in tub: check the drain hose for kinks and clogs; replace if damaged using washer drain hose WP213045
• Excess vibration or belt slipping: inspect motor mount rollers and springs; washer motor mount roller and spring kit 205000

Quick checks we recommend before ordering parts

1. Unplug the washer and confirm the outlet has power.
2. Close the lid firmly; listen for a distinct click at the lid switch area.
3. Verify both water supply valves are fully open and inlet screens are not clogged.
4. Look underneath for belt dust, glazing, or cracks on the drive belt.
5. Inspect hoses for splits, loose clamps, or wet spots around connections.

Symptom-to-fix guide

Symptom	Most likely area	Typical fix
Won’t spin with lid closed	Lid safety circuit	Replace lid switch
Won’t fill or fills slowly	Water inlet system	Clean screens or replace inlet valve
Squeals or won’t agitate/spin well	Belt drive	Replace drive belt; check motor mount parts
Leaks during fill or drain	Hoses and clamps	Tighten connections; replace hose if cracked

Why it matters

On the A512, the lid switch and belt drive system directly control whether the motor can run and whether the tub can spin. Catching a worn belt or failing inlet valve early helps prevent bigger issues like repeated no-spin cycles, water damage, or motor strain.

Last updated: March 2026

A512 is the model number for a Maytag washer. On our Maytag A512 washer parts page, “A512” identifies the exact washer design so you can match the correct replacement parts (like a lid switch, drive belt, or water inlet valve) to your machine and avoid ordering the wrong item.

What “A512” means on a washer

When you see Maytag A512, it refers to a specific Maytag washer model. That model number is used to:

• Match parts to the correct Maytag design and production series
• Narrow down diagrams and part lists to what fits your washer
• Reduce fitment issues when replacing common wear items
• Help troubleshoot symptoms by focusing on the right component set

Where to find the model number on the washer

Most Maytag top-load washers have the model tag in one of these places:

• Under the lid near the tub opening
• On the rim of the washer opening
• On the back of the control console
• On the rear panel of the cabinet

If the tag is worn, use the clearest characters you can; even one wrong digit can change the parts list.

Common parts customers replace on Maytag A512

These are examples of parts we commonly see replaced for this model:

Symptom	Common part to check	Example part on this model page
Won’t start or won’t spin with lid closed	Lid switch	Lid switch W10820036
Won’t agitate or spin, burning rubber smell	Drive belt	Washer drive belt 12112425
Slow fill, no fill, or incorrect water temperature	Water inlet valve	Washer water inlet valve 205613

Why it matters

“A512” can also refer to unrelated standards in other industries, but for this Maytag washer page it is strictly the washer model number. Using the correct model number is the fastest way to get the right Maytag washer parts and restore normal wash performance.

To order parts, use the parts list for Maytag A512 on this page, or search by model number on Sears PartsDirect.

Last updated: February 2026

A Maytag A512 top-load washer typically lasts about 14 years with normal household use. Keeping the drive system, lid safety circuit, and water fill components in good shape helps you reach that lifespan and avoid common breakdowns.

What affects lifespan most

• Load size and balance: frequent overloading shortens belt, motor, and bearing life.
• Water quality: sediment can stress the inlet valve and internal screens.
• Drain and spin strain: slow draining or heavy, wet loads increase wear.
• Maintenance habits: cleaning lint and checking hoses prevents secondary damage.
• Timely part replacement: fixing small issues early prevents bigger failures.

Quick maintenance checklist (high impact)

• Keep loads at or below the tub’s comfortable fill level; avoid packing items tightly.
• Level the washer so it does not walk or bang during spin.
• Inspect fill hoses for bulges or cracking; replace at the first sign of wear.
• If the washer will not spin, test the lid switch circuit early; a failed switch can mimic bigger problems.
• Address squealing or burning-rubber smells promptly; belts and tension components wear gradually.

Common wear items and what they do

Symptom	Likely wear area	Example part to check for A512
Won’t spin or stops when lid closes	Lid safety circuit	Lid switch W10820036
Squealing, slipping, weak agitation/spin	Drive belt system	Washer drive belt 12112425
Slow fill or no fill	Water inlet valve	Washer water inlet valve 205613

Why it matters

Knowing the typical 14-year lifespan helps you decide whether to repair or replace. On an A512, replacing a belt, lid switch, or inlet valve often restores reliable operation and prevents repeat failures that can shorten the washer’s remaining life.

Last updated: March 2026