How to find Kenmore Range model number?
For Kenmore electric range model 79092703014, the model and serial number are printed on the serial plate. On this model, you find that plate by opening the warmer drawer or storage drawer; it’s attached to the lower right oven frame. See the 79092703014 owner's manual for the exact location diagram.
Check these spots in order:
- Open the warmer drawer (if your range has one) and look at the lower right oven frame
- Open the storage drawer (if your range has one) and look at the lower right oven frame
- If the drawer is hard to open, pull it out fully and use a flashlight to read the plate
The serial plate typically includes:
- Model number (example format: 790.XXXXXXX)
- Serial number
- Electrical ratings (volts/amps)
Write down both numbers exactly as shown; they help us match the correct Kenmore parts list, wiring layout, and installation requirements.
| Item | What it’s used for | Example |
|---|---|---|
| Model number | Identifies the exact range design and compatible parts | 79092703014 |
| Serial number | Identifies your specific unit and production run | Varies |
Using the correct model number prevents ordering the wrong bake element, oven temperature sensor, or control board for your Kenmore range. If you’re shopping for replacement parts after you find the model number, you can also search by model on Sears PartsDirect.
Last updated: February 2026
How do you reset a Kenmore 79092703014 oven?
To reset a Kenmore 79092703014 electric range oven, we turn the oven off and cycle power at the breaker for about 1 minute, then restore power and reset the clock and any oven settings. This clears many control glitches after a power interruption.
- Soft reset: Press STOP/CLEAR once to cancel a cooking cycle or clear an incorrect setting.
- Power reset: Turn the range circuit breaker OFF (or remove the fuse), wait 60 seconds, then turn it ON.
- After power returns: Reset the clock and reselect your desired oven function (bake, broil, convection) as needed (see the owner's manual).
This model has an oven lockout feature that can make the keypad seem “dead.”
- Make sure the oven door is fully closed.
- Press and hold STOP for 3 seconds to toggle lockout.
- Wait about 15 seconds for the door latch motor to finish locking or unlocking.
- Do not try to open or close the door while DOOR LOCKED is flashing.
If the oven has stored recipes or custom settings, clearing stored recipes also resets multiple control adjustments back to factory defaults.
| Reset type | What it does | What you may need to set again |
|---|---|---|
| Power reset at breaker | Clears many temporary control errors | Clock, oven function after outage |
| Clear stored recipes | Erases stored bake recipes and resets several control adjustments | 12/24-hour display, °F/°C, silent mode, temperature offset |
A reset is often the fastest way to recover from a power glitch, stuck keypad behavior, or odd beeping. If problems continue after a reset, the issue is usually in a component such as the oven sensor or electronic control.
For ordering replacement parts for your Kenmore 79092703014, use the parts list for this model or search by model number on Sears PartsDirect.
Last updated: February 2026
What was the size of the Kenmore 79092703014 oven?
The Kenmore 79092703014 is a 790-series electric range; the exact oven capacity (cubic feet) and overall exterior dimensions are listed in the product specifications section of the 79092703014 owner's manual and the 79092703014 installation guide. The auction dimensions you found apply to a different model and should not be used for this range.
When customers ask for oven size, we typically see one of these:
- Oven capacity (measured in cubic feet)
- Exterior dimensions (width, height, depth)
- Cutout/clearance requirements (space needed for safe installation)
- Rack positions and usable interior space
Use these documents for model-specific numbers:
- 79092703014 owner's manual: look for product specifications and feature details
- 79092703014 installation guide: look for cabinet clearances, anti-tip requirements, and overall dimensions
| What you need | Best source | Why |
|---|---|---|
| Oven capacity (cu ft) | Owner's manual | Capacity is a product spec tied to the exact model |
| Width/height/depth | Installation guide | Dimensions and clearances are installation-critical |
| Clearance to cabinets/walls | Installation guide | Prevents heat damage and fit issues |
| Rack setup and positions | Owner's manual | Helps estimate usable cooking space |
Using the wrong model’s measurements can cause fit problems (depth at the countertop, door swing clearance, or rear clearance for the power cord). For safe operation, the installation clearances for the Kenmore 79092703014 are the numbers that count.
Last updated: February 2026




