Installation guide
Owner’s manual
Error Codes
Does a Kenmore Elite have a reset button?
No. The Kenmore Elite electric range model 79098022800 does not use a single dedicated reset button; most “resets” are done by restoring power (breaker off then on) and then re-setting the clock and any oven functions per the owner's manual.
- Turn OFF the range at the household circuit breaker.
- Wait 2 to 5 minutes.
- Turn the breaker ON.
- If the display is flashing, set the clock again.
- Re-enter any cooking settings you were using (bake, convection, timer).
A power cycle clears many temporary control glitches, especially after a power interruption. It will not fix a failed heating circuit, sensor, or control board.
| Symptom | What to try first | Likely next step if it returns |
|---|---|---|
| Display flashing after outage | Set clock after power is restored | Check for repeated outages or loose power connection |
| Oven temperature seems off | Use the oven temperature adjustment procedure | Test/replace the frigidaire range oven temperature sensor 316217002 |
| Oven dead or intermittent power | Check breaker and power cord connection | Inspect/replace the terminal block 5304409888 if connections are burned |
Some settings can be returned to factory defaults by clearing stored recipes and adjustments using the control panel procedure described in the owner's manual. This can also reset items like 12/24-hour display and temperature display units.
On model 79098022800, the control is designed to resume normal operation after power is restored, but you should reset the clock and confirm the oven mode before cooking. A proper reset step can prevent unexpected operation and helps you separate a simple control glitch from a part failure.
Last updated: February 2026
Is Kenmore Elite a good stove?
Yes. Kenmore Elite ranges are built as higher-end Kenmore models, and the Kenmore Elite 79098022800 is designed for years of dependable operation when installed, operated, and maintained as described in the 79098022800 owner's manual.
A good electric range consistently holds temperature, heats evenly, and stays reliable under normal cooking loads. For the Kenmore Elite 79098022800, we focus on the features and care guidance in the manual, plus the most common performance factors that affect baking, broiling, and day-to-day use.
- Even baking: stable oven temperature and good heat distribution
- Strong broiling: high heat output and consistent top heat
- Responsive cooktop: surface elements cycle correctly and match pan size
- Reliable controls: keypad and control boards respond without errors
- Serviceable design: common wear parts are replaceable (light bulb, sensor, relays)
If your range is not baking evenly, takes too long to preheat, or runs hot or cold, the most common fix path is calibration and basic checks first, then testing key components.
- Temperature swings or inaccurate oven temps: check the frigidaire range oven temperature sensor 316217002
- Oven overheats or trips protection: inspect the range high-limit thermostat 318004902
- Oven light not working: replace the range oven light bulb 316538904 and inspect the range oven light socket 316116400
- Surface elements not heating correctly: the frigidaire range surface unit power relay board 316442119 can be involved
- Control issues (no heat, erratic operation): control boards such as the frigidaire range oven relay control board 316443927 may be part of diagnosis
Following the care guidance in the manual helps keep temperatures stable and prevents avoidable problems.
| Habit | What it helps prevent | When to do it |
|---|---|---|
| Wipe up heavy spillovers | Smoke, odors, longer clean cycles | After the oven cools |
| Keep door seal clean and intact | Heat loss, uneven baking | Monthly |
| Avoid blocking vents | Overheating, poor airflow | Every use |
| Use correct cookware size | Slow heating, uneven cooktop results | Every use |
Most “bad stove” complaints come down to temperature accuracy, airflow, or a failing sensor or safety thermostat. Addressing those early keeps your Kenmore Elite 79098022800 cooking consistently and helps avoid bigger electrical failures.
Last updated: February 2026
Where is the model number on the Kenmore Elite stove?
On the Kenmore Elite electric range model 79098022800, the model and serial number are printed on the serial plate; you will typically find that label on the oven frame area (commonly visible when you open the oven door or access the lower drawer area). The exact serial plate location is shown in the 79098022800 owner's manual.
- Open the oven door and look along the door frame (door jamb) for a rating label.
- Pull out the bottom storage or warming drawer and look on the frame behind it.
- Check the back panel area near where the power cord connects.
- Look on the side frame behind the control panel area if the front locations are clear.
The correct label will include both a model number and a serial number. For this range, the model number format will match 790.9802 followed by a color code (your full model is 79098022800).
| What you see on the label | What it means | What to do with it |
|---|---|---|
| Model number (example: 790.9802xxxx) | Identifies the exact range configuration | Use it to match parts and diagrams |
| Serial number | Identifies the production unit | Helpful for service history and documentation |
Using the exact model number helps us match the correct Kenmore Elite range parts (for example, an oven temperature sensor, control board, or surface element) so the replacement fits and the wiring and mounting points line up correctly.
Last updated: February 2026
Who makes Kenmore Elite appliances?
Kenmore Elite appliances are made by multiple manufacturers (OEMs) that build products for the Kenmore brand, not by one single company. For the Kenmore Elite electric range model 79098022800, the exact OEM can vary by product line and production run, so we use the model number and parts list to match the correct replacement parts.
Kenmore is a brand name; different OEMs have produced Kenmore Elite appliances over the years. That is why parts and service information is organized by model number.
Common OEMs you may see associated with Kenmore Elite appliances include:
- Whirlpool
- LG
- Frigidaire/Electrolux
- Panasonic
- Other contracted manufacturers depending on the appliance type and year
The most reliable way to stay accurate is to match parts by model number and the parts diagram, not by guessing the OEM.
Use these checks:
- Confirm the model number on the serial plate matches 79098022800
- Use the parts list for your model to select the exact component
- Cross-check the part description (for example, oven light, sensor, control)
- Compare wiring/installation notes in the documentation
| What you are replacing | Example part on this model | What it affects |
|---|---|---|
| Oven light bulb | Range oven light bulb 316538904 | Interior oven lighting |
| Oven temperature sensing | Frigidaire range oven temperature sensor 316217002 | Baking temperature accuracy |
| Power connection block | Terminal block 5304409888 | Range power cord connection |
Kenmore Elite branding does not guarantee a single manufacturer, but your model number does guarantee the correct fit when you choose parts and follow the correct procedures. For operating features, settings, and safety information for this range, we recommend using the owner's manual.
Last updated: February 2026
