Kenmore 79572033112 refrigerator Parts

For Kenmore refrigerator model 79572033112, the safest way to choose the right water filter is to match the filter to your exact model number, not just the refrigerator style. Your filter part number is listed in the 79572033112 owner's manual, and this model’s compatible option includes the genuine Kenmore refrigerator water filter 9690 AGF80300801.

The quickest ways to confirm the correct filter

• Check the filter label on the existing cartridge (part number is often printed on the side or end cap).
• Look up the filter by model number 79572033112 in the parts list for “water filter” or “filter”.
• Verify the part number in the 79572033112 owner's manual before ordering.
• Match by fit and connection style (twist-in vs push-in); do not rely on “universal” claims.
• If your dispenser flow is slow, confirm it is not a clogged filter before assuming you have the wrong one.

What to match when buying a replacement

Use this checklist so you get the correct cartridge the first time:

• Model number: 79572033112 (most important)
• Filter location: inside fresh food compartment, base grille, or rear (varies by design)
• Installation type: quarter-turn/twist lock vs push-in
• Symptoms driving replacement: bad taste/odor, slow dispenser flow, ice maker fill issues

What you have	What it usually means	What to do
Part number printed on old filter	Direct match available	Order the same part number if it cross-references for 79572033112
No part number visible	Filter is worn or label rubbed off	Confirm using the manual and the model-based parts list
Slow water at dispenser	Filter may be clogged	Replace filter first, then recheck flow

Why it matters

Using the correct Kenmore refrigerator water filter helps maintain normal water flow to the dispenser and ice maker, reduces leaks from poor fit, and keeps filtration performance consistent with what the refrigerator was designed to use.

Helpful how-to guidance

For step-by-step replacement tips and common fit questions, use how to replace the water filter in a Kenmore refrigerator.

Last updated: January 2026

Most Kenmore freezers last 10 to 15 years with normal use and basic maintenance. For a Kenmore bottom-mount refrigerator like model 79572033112, the freezer section typically follows that same lifespan range when temperatures are kept steady and airflow stays clear (see the 79572033112 owner's manual for care and operating guidance).

Typical lifespan and what affects it

A freezer’s life depends less on brand name and more on operating conditions and upkeep.

• Temperature stability: frequent warm-ups shorten compressor life
• Airflow: blocked vents force longer run times
• Condenser cleanliness: dust buildup raises operating heat
• Door seal condition: leaks cause constant cycling and frost
• Ice maker and dispenser use: higher demand increases run time

Quick checks that help your freezer reach 10 to 15 years

• Keep freezer set near 0°F and refrigerator near 37°F
• Leave space around food packages so air can circulate
• Clean condenser area periodically (unplug first)
• Confirm doors close fully and stay aligned
• Replace worn gaskets if you feel cold air leaking

Common “end-of-life” symptoms vs fixable issues

Symptom	Often fixable?	Common cause
Warm freezer but fridge OK	Yes	Airflow or fan issue
Heavy frost on back wall	Yes	Door leak or defrost problem
Loud clicking, won’t start cooling	Sometimes	Start components or compressor
Runs constantly, temps drift	Sometimes	Dirty condenser, gasket leak, sealed system

If you’re seeing door-leak symptoms (frost, sweating, constant running), a worn gasket is a frequent culprit; the right-side fresh food seal for this model is the refrigerator door gasket, right ADX73550624.

Why it matters

A freezer that runs longer than it should uses more electricity, struggles to hold safe food temperatures, and puts extra wear on the compressor and fans. Catching airflow and door-seal problems early is the easiest way to extend service life.

Last updated: January 2026

Common Kenmore Elite refrigerator problems usually come down to cooling failures, ice and water dispensing issues, or door sealing problems. On Kenmore model 79572033112, the most frequent repair paths involve the compressor, the ice maker system, or the main electronic control.

Most common symptoms customers report

• Refrigerator not cooling or cooling unevenly (fresh food warm, freezer OK or vice versa)
• Clicking or humming with little or no cooling (compressor start issues)
• Ice maker not making ice, slow ice production, or clumping
• Water dispenser slow, sputtering, or not dispensing
• Frost buildup, moisture, or warm air leaks around doors

What usually causes those problems

Here are the most common root causes we see for Kenmore Elite style refrigerators like the 79572033112:

Symptom	Most likely system	Common part to check first
Not cooling	Sealed system / compressor	Refrigerator compressor TCA38091801
No ice	Ice maker / fill system	Ice maker assembly (AEQ73110203) - refrigerator ice making component by lg AEQ73110203
No water or slow water	Water supply / valve / filter	Genuine Kenmore refrigerator water filter 9690 AGF80300801
Warm air leaks, condensation	Door sealing / alignment	Refrigerator door gasket, right ADX73550624
Lights or dispenser act up	Door switch / controls	Refrigerator door switch 6600JB1010A

Quick checks we recommend before replacing parts

• Confirm temperatures: set freezer near 0°F and refrigerator near 37°F; allow 24 hours to stabilize.
• Check airflow: do not block vents with food packages; verify the evaporator area is not packed with frost.
• Verify water supply: make sure the shutoff valve is fully open and the supply line is not kinked.
• Replace the water filter if flow is weak or taste is off; then flush several gallons.
• Inspect door seals: look for gaps, tears, or areas that do not grip a dollar bill when the door is closed.

Why it matters

Cooling and ice maker complaints often share the same underlying issues: restricted airflow, poor door sealing, or weak water supply. Catching those early helps prevent food spoilage, ice buildup, and unnecessary compressor run time.

Model-specific help

For control settings, diagnostic indicators, and component locations on Kenmore 79572033112, use the 79572033112 manual. For troubleshooting ice and water issues step-by-step, we also recommend how to prevent water dispenser and ice maker problems.

Last updated: January 2026

If your Kenmore 79572033112 is warm at the bottom, the most common causes are restricted airflow or poor heat removal, often from dirty condenser coils, a stalled fan, or frost and ice buildup that blocks cold air from reaching the lower section.

Quick checks we recommend first

• Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
• Make sure food packages are not blocking vents (especially low rear vents).
• Confirm the doors close fully and the gaskets seal all the way around.
• Listen for fans: you should typically hear airflow when the unit is running.
• Pull the refrigerator out and check for heavy dust under or behind it.

Clean the condenser area (most common fix)

Dirty condenser coils make the sealed system run hotter and can reduce cooling, especially in the fresh food section.

• Unplug the refrigerator.
• Remove the lower front grille or rear access cover (as applicable).
• Vacuum dust and pet hair from the coils and the fan area.
• Restore power and allow 12 to 24 hours to stabilize.

If the coil itself is damaged or badly corroded, replacement may be needed: refrigerator condenser coil ACG73964501.

If the bottom is warm but the freezer seems OK

This pattern usually points to an airflow problem between compartments.

Symptom	Most likely cause	What to check
Freezer cold, fridge bottom warm	Frost blocking airflow	Frost on rear freezer panel, weak airflow at vents
Fridge warm, freezer warm too	Condenser airflow or sealed system issue	Dirty coils, condenser fan running, compressor running
Warm near doors, sweating	Door seal leak	Gasket gaps, torn gasket, door alignment

Parts that commonly relate to this symptom

• Condenser airflow problems: refrigerator condenser fan motor assembly EAU61723501
• Temperature control issues: refrigerator electronic control board EBR73304204
• Door not closing or light staying on: refrigerator door switch 6600JB1010A
• Poor door seal: refrigerator door gasket, right ADX73550624

Why it matters

When airflow is restricted or the condenser cannot shed heat, the refrigerator section often loses cooling first. Fixing coil and airflow issues early helps protect food temperatures and reduces strain on the compressor.

For model-specific access panels, cleaning points, and airflow locations, use the 79572033112 owner's manual.

Last updated: January 2026