Kenmore 25360722004 refrigerator Parts

Yes. You can still get replacement parts for Kenmore refrigerators, including model 25360722004, by matching the exact model number to the correct parts list and diagrams. Common service parts like defrost components, door gaskets, and fan parts are still available for many Kenmore models.

We recommend using the model number 25360722004 to select parts by section (cooling system, defrost, door, controls) and then confirming the part by description and location in the diagram.

• Match the part to the exact symptom (no cooling, frost buildup, warm freezer, door not sealing)
• Confirm the part fits your exact model variation (Kenmore model numbers can have multiple revisions)
• Use the troubleshooting and feature info in the owner's manual
• Compare the old part to the listing (mounting points, wire connectors, shape)
• Replace related wear items when appropriate (for example, gasket issues often need cleaning and alignment too)

These are examples of parts shown for Kenmore 25360722004 that often come up in repairs:

Using the correct model-specific parts helps restore proper temperatures, prevents repeat failures (like recurring frost buildup), and protects the sealed cooling system from extra strain.

Last updated: February 2026

The Kenmore Coldspot refrigerator model 25360722004 is approximately 66 3/4 in. tall with the hinge, 65 7/9 in. tall without the hinge, 33 7/9 in. deep with the handle, and 32 1/8 in. deep without the handle. For placement clearances and setup details, use the owner's manual.

The cabinet dimensions are only part of the fit. We also recommend planning for airflow, door swing, and leveling.

• Leave about 3 inches of space on all sides for air circulation.
• Place the refrigerator near a grounded electrical outlet (no extension cord or adapter plug).
• Make sure the floor is solid and the unit can be leveled so all corners rest firmly.
• Confirm you have room to open the door fully for shelves and bins.
• Measure the path into the kitchen (doorways, turns, and flooring transitions).

Correct sizing and clearance help your Kenmore refrigerator cool efficiently and reduce issues like warm temperatures, excessive compressor run time, and door sealing problems.

Last updated: February 2026

On Kenmore refrigerator model 25360722004, the 5Y EF (often shown as SY EF) code points to a problem in the evaporator fan circuit, which affects airflow and cooling. In most cases, the issue is the evaporator fan motor, fan blade obstruction, a door switch problem, or wiring.

• Unplug the refrigerator for 5 minutes, then restore power to see if the code clears.
• Listen for the evaporator fan running (typically a steady fan sound when the door is closed).
• Check for frost or ice buildup that could be rubbing the fan blade.
• Make sure the door fully closes and the gasket seals all the way around.
• Confirm vents are not blocked by food packages.

For model-specific access points and component locations, use the owner's manual.

In this model family, 5Y EF/SY EF is usually triggered when the control does not see the expected evaporator fan feedback.

• Failed evaporator fan motor: Replace the fan motor if it is not spinning or is noisy.
• Damaged or stuck fan blade: Ice contact or a cracked blade can prevent proper airflow.
• Bad door switch: If the switch does not register the door as closed, the fan may not run.
• Heavy frost from a defrost problem: A defrost heater or defrost thermostat issue can lead to ice buildup that stops the fan.

The evaporator fan moves cold air through the freezer and refrigerator sections. When the fan circuit fails, temperatures rise, food can thaw, and the compressor may run longer than normal.

• Inspect the fan area for ice and clear it by unplugging and leaving doors open (protect floors with towels).
• If the fan still will not run with the door switch held closed, replacing the fan motor is the most common next step.
• If frost buildup returns quickly, focus on the defrost heater and defrost thermostat.

Last updated: February 2026

Kenmore refrigerators typically last 12 to 15 years with normal household use. With consistent care (cleaning, good airflow, and tight door seals), many units run longer; use the owner's manual maintenance and cleaning guidance to help your Kenmore 25360722004 reach its full service life.

Most refrigerator life expectancy comes down to heat management, door sealing, and defrost performance.

• Condenser cleanliness: dusty coils make the compressor run hotter and longer
• Door gasket condition: air leaks cause longer run times and frost issues
• Defrost system health: prevents heavy frost that blocks airflow
• Room conditions: hot garages and tight enclosures shorten life
• Usage habits: frequent door openings and overpacking reduce airflow

We recommend these routine steps to extend lifespan and reduce breakdowns:

• Vacuum dust from the condenser area and surrounding vents
• Keep space around the cabinet for airflow (avoid tight built-ins)
• Confirm the door closes fully and seals all the way around
• Set stable temperatures and avoid frequent large adjustments
• Defrost and clear frost buildup if airflow becomes restricted

Some parts are normal wear items; others point to bigger cooling-system problems.

If you are troubleshooting cooling or frost problems on the Kenmore 25360722004, these model-matched parts are commonly involved:

• Defrost timer 5304518034 (controls defrost cycles)
• Freezer defrost heater 216730700 (melts frost off the evaporator)
• Refrigerator defrost bi-metal thermostat 216731001 (helps regulate defrost heating)
• Freezer door gasket 5304507200 (prevents warm air leaks)
• Universal/multiflex (frigidaire) freezer compressor start relay 216954200 (helps the compressor start)

A refrigerator that runs hot, leaks air, or can’t defrost properly will cycle longer and strain the compressor. Keeping airflow clear and seals tight is the most reliable way to push lifespan toward the upper end of the 12 to 15 year range.

Last updated: February 2026