Kenmore 66513473N411 dishwasher Parts

Yes. We still support replacement parts for Kenmore dishwashers, and for Kenmore model 66513473N411 many common repair parts are available, including wash system, drain, heating, and rack hardware. Use your full model number to match the correct OEM part and avoid fit issues.

Best way to find the right part for 66513473N411

• Match the full model number exactly: 66513473N411
• Use the exploded views and part lists in the 66513473N411 owner's manual
• Confirm the symptom first (no drain, no heat, poor cleaning, leaks) so you replace the correct component
• Compare the part ID on the listing to your original part when possible
• If your dishwasher has an error code, use the Kenmore 665 model dishwasher error codes guide to narrow the failure

Common Kenmore dishwasher parts you can still replace

These are frequent wear or failure items we see on this platform:

• Heating circuit parts (for drying and water temperature)
• Drain components (pump and drain hose)
• Water fill components (inlet valve)
• Filtration and wash components (filter, spray arm)
• Door and rack hardware (latch, rack stops)

Examples of parts available for this model

Symptom	Likely part category	Example part for 66513473N411
Water not draining	Drain pump	Dishwasher drain pump WPW10348269
Dishes not drying or water not heating	Heater	Element assembly W10518394
Poor wash coverage	Spray arm	Dishwasher spray arm, lower W10849471
Won’t fill or fills slowly	Water inlet valve	Dishwasher water inlet valve W11175771
Door won’t latch	Door latch	Dishwasher door latch WPW10653840

Why it matters

Kenmore parts availability is strong because many Kenmore dishwashers share designs with major manufacturers. The key is using the exact model number and the correct part ID so the electrical connectors, mounting points, and hose routing match your dishwasher.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66513473N411 is usually worth it when the problem is a common wear item (drain pump, inlet valve, latch, filter, or heater) and the repair cost stays well below the price of a replacement. We use the 66513473N411 owner's manual to confirm symptoms and troubleshooting steps before replacing parts.

Quick decision checklist

• Repair if the dishwasher still cleans well and the issue is isolated (won’t drain, won’t fill, won’t heat, door won’t latch).
• Repair if the fix is a single part and you can do a safe DIY install.
• Repair if the tub is solid and there are no persistent leaks from the sump area.
• Replace if multiple major systems are failing (wash motor plus heating plus controls).
• Replace if the unit has chronic leaking or heavy corrosion that keeps returning.
• Replace if repair cost approaches the cost of a new dishwasher.

Common repairs on this model and what they typically mean

Many “not draining” or “not cleaning” complaints come down to a few serviceable parts.

Symptom	Likely area to check	Example part for 66513473N411
Water left in bottom	Drain path, drain pump, hose routing	Dishwasher drain pump WPW10348269
Not filling or fills slowly	Water supply, inlet valve, float	Dishwasher water inlet valve W11175771
Poor cleaning, debris recirculates	Filter system, spray arm	Dishwasher filter WPW10463906
Dishes not drying, water stays cool	Heating circuit	Element assembly W10518394
Door won’t start cycle	Door latch and switch	Dishwasher door latch WPW10653840

Why it matters

A targeted repair keeps a good dishwasher in service and restores performance. Your manual also highlights routine troubleshooting and maintenance, which helps prevent repeat issues and reduces strain on parts like the pump, heater, and filter system.

What we recommend before spending money

• Check for a simple clog (filter area, sump screen, drain hose loop/air gap).
• Run a cleaning cycle and clean the filter; follow the maintenance guidance in the 66513473N411 owner's manual.
• If you’re seeing an error, match it to the right troubleshooting path using Kenmore 665 model dishwasher error codes.

Last updated: February 2026

On Kenmore dishwasher model 66513473N411, the model number is printed on the model and serial number label located on the dishwasher tub frame area, typically visible when you open the door. Use that exact number to match parts, manuals, and diagrams.

Where to look on the dishwasher

Check these common label locations first (open the door and use a flashlight):

• Along the left or right inner door frame (tub opening edge)
• On the top edge of the tub opening, just under the countertop
• Near the control panel area on the inner door
• On the side wall of the tub opening, close to the front

For a diagram showing the “model and serial number label” location, use the owner's manual.

What the label looks like and what to copy

The label usually lists multiple identifiers. Copy them exactly as printed:

• Model number (example format: 665.1347xxx)
• Serial number (used for production date and service history)
• Electrical ratings (volts/amps), sometimes included

Quick checklist

• Write the model number exactly, including all digits
• Keep any letters and suffixes (they affect part compatibility)
• Take a clear photo before the label gets worn or stained

Why it matters

Kenmore 665-series dishwashers can look similar but use different pumps, valves, racks, and heating components. The correct model number ensures you get the right replacement part the first time (for example, a dishwasher water inlet valve W11175771 or dishwasher door latch WPW10653840).

Model number formats you may see

What you see	What it means	What to do
665.1347…	Series-style model format used in manuals	Copy the full number from the label
66513473N411	Full model number used for parts lookup	Use this exact number when ordering

Last updated: March 2026