Tappan TEF326FSB electric range Parts

Yes. We still see Tappan electric ranges like model TEF326FSB repaired regularly; most heating, burner, and control problems are serviceable with standard range diagnostics and available replacement parts. For safe operation and model-specific procedures, use the TEF326FSB owner’s manual.

What most repair companies can still fix on TEF326FSB

• Oven will not heat or heats unevenly (bake or broil circuit issues)
• Surface element will not heat or will not regulate temperature
• Oven temperature is inaccurate (sensor or control calibration issues)
• Oven light will not work (bulb or socket)
• Power and wiring problems at the range connection

Quick checks before you schedule service

Turn power off at the breaker before inspecting anything.

• Confirm the range has power (check house lights and the breaker)
• Set the clock; on many ranges the oven will not operate until time-of-day is set
• Verify you are using the correct control for the burner or oven function
• If the oven light is out, replace it with a 40-watt appliance bulb and reset the clock afterward

Common parts that solve common symptoms

Symptom	Likely part area	Example part for TEF326FSB
Oven will not bake	Bake heating circuit	Frigidaire range bake element 316075103
Oven temperature seems off	Temperature sensing	Oven temperature sensor (probe)
Surface burner not regulating	Infinite switch	Surface element control switch

Why it matters

Electric ranges can restart when power returns if controls were left on. Turning controls off during an outage and using correct troubleshooting steps helps prevent unsafe operation and reduces repeat service calls.

Last updated: January 2026

If your Tappan TEF326FSB electric range oven is not working, the most common causes are a clock/time-of-day setting that is not set, a power supply problem (outlet, cord, breaker), or oven controls that are not set for a cooking mode. Start with the quick checks below before replacing parts.

Quick checks first (most fixes)

• Confirm the range has power: check house lights, then check the breaker.
• Make sure the cord/plug is fully seated in the outlet.
• Set the time of day; this model requires the clock to be set before the oven will operate (see TEF326FSB owner’s manual).
• Verify you selected a bake or broil function and set a temperature.
• If there was a power outage, turn the range off; when power returns, reset the clock and oven function.

What to check based on the symptom

Symptom	Most likely cause	What we recommend
Entire range seems dead	No power, wiring not complete	Check breaker, outlet, cord connection; review TEF326FSB installation guide wiring notes
Cooktop works but oven will not heat	Control settings, failed heating circuit	Recheck settings; then inspect heating elements and sensor
Oven light does not work	Loose or failed bulb	Tighten or replace the bulb using range oven light bulb 316538904

Parts that commonly solve “oven not working”

If power and settings are correct, these TEF326FSB parts are common suspects:

• Frigidaire range bake element 316075103 if bake will not heat.
• Frigidaire range broil element 316203200 if broil will not heat.
• Oven probe 316233903 if temperatures are erratic or the oven will not regulate heat.

Why it matters

An oven that will not start is often a control or power issue, not a major failure. Verifying power, clock setup, and correct mode selection prevents unnecessary part replacement and gets your range heating safely again.

Last updated: January 2026

On the Tappan TEF326FSB electric range, the model and serial number are printed on the serial plate located behind the broil or storage drawer on the lower right side of the appliance frame. Use that exact model number when ordering parts or checking wiring requirements.

Where to look (quick steps)

• Turn the range off and let it cool completely.
• Pull the broil drawer or storage drawer straight out.
• Look at the lower right side of the range frame (inside the drawer opening).
• Find the serial plate label; it lists Model Number and Serial Number.
• Write both down and keep them with your paperwork.

What the label helps you do

The model and serial plate confirms the exact configuration of your range, which matters for parts fit and electrical setup.

You need	Use the label to confirm	Example for this range
Replacement parts	Exact model match	TEF326FSB
Electrical connection info	Correct cord kit and wiring type	3-wire vs 4-wire setup
Service reference	Serial number for production details	Serial number on plate

Why it matters

Small model variations can change which bake element, surface control switch, or terminal block fits. Using the serial plate information helps us match the correct diagrams and parts for your TEF326FSB.

Helpful references

• The location of the serial plate is shown in the owner's manual.
• If you are installing or reconnecting power, follow the installation guide for cord kit rating and 3-wire or 4-wire connections.

Last updated: March 2026