Tappan Electric range Parts — Browse All Models

Troubleshooting your Tappan electric range when the oven won't heat

• Confirm the power supply. Make sure that you have 240 volts of power going to the oven. Check both house circuit breakers for the range and reset any tripped breaker.
• Unplug the range and check the bake element. Replace the bake element if it's visibly broken or damaged.
• Remove the upper back panel. Unplug the element wires from the electronic control board. Use a multimeter to measure the resistance through the yellow and orange wires that go to the bake element. Your meter should read about 16 ohms of resistance through that circuit. If your meter measures around 16 ohms of resistance, then the bake element circuit is okay. Now, if you read no continuity, when you checked the bake element from the control board, then you probably have a broken bake element or a wiring failure in that circuit. Check the resistance of the bake element directly at the element terminal ends. If your meter reads "OL," replace the bake element. This video will show you how.

Top replacement parts for Tappan electric ranges

• Electronic oven control board. The electronic oven control (EOC) board governs the timing and execution of oven functions in the range. It's usually attached to the control panel and often has a digital display clock mounted on the front of its housing.
• Oven door lock assembly. The oven door lock assembly is a safety mechanism that prevents accidental burns and oven fires by latching the door shut during self-cleaning. The door unlocks when the oven cools to a safe temperature (usually less than 200 degrees F). It's also used on ovens with the child lock-out feature. The assembly includes the lock and switches that detect whether the door is locked.
• Oven temperature sensor probe. The oven temperature sensor probe is at the top of the back of the oven and detects the temperature inside the oven. Temperature is measured by the change in resistance in this sensor, which is why the sensor is also referred to as an Resistance Temperature Detector (RTD). A wire harness connects the oven temperature sensor probe to the electronic control board so the sensor can communicate the oven temperature to the control board.
• Radiant surface element. The radiant surface element is mounted on the bottom of a ceramic glass cooktop and provides heat for that area of the cooktop. It's controlled by a surface element switch (also called a surface burner switch or infinite burner switch). The radiant surface element has a limit switch that shuts off the element to protect the ceramic glass cooktop from overheating.
• Surface element switch. The surface element switch (also called a surface burner switch or infinite burner switch) is mounted on the control panel of an electric range or cooktop. It's an electrical switch that turns on and off the associated surface element and also controls the how much heat the element produces.