Kenmore 10651793412 side-by-side refrigerator Parts

Your Kenmore side-by-side refrigerator model 10651793412 is typically in the mid-20 cubic foot range. The most accurate capacity for your exact Kenmore Elite configuration is listed on the model’s rating label and in the 10651793412 owner's manual.

How to find the exact cubic feet for model 10651793412

We recommend checking these two places first:

• Owner’s manual specs section (capacity is usually listed by refrigerator and freezer compartments)
• Model rating label (often inside the fresh food compartment on a side wall or ceiling area)
• Product literature packet (if you still have it)
• Online model specs (when available for your exact revision)

If you want to calculate cubic feet yourself (quick method)

Cubic feet is based on usable interior space, not the outside cabinet size. Measuring the exterior (height x width x depth) usually overstates capacity.

To estimate interior volume:

• Empty the compartment you are measuring
• Measure interior width, height, and depth in inches
• Multiply the three numbers to get cubic inches
• Divide by 1,728 to convert cubic inches to cubic feet

Conversion table

What you have	Convert to	Math
Cubic inches	Cubic feet	divide by 1,728
Cubic feet	Cubic inches	multiply by 1,728

Why it matters

Knowing cubic feet helps us match the right parts and maintenance items (like a water filter, ice maker, or door bins) and it also helps when comparing storage capacity across Kenmore side-by-side refrigerator models.

If you are also replacing filtration parts while you check specs, use the correct filter for this model, such as the Kenmore refrigerator water filter 9081.

Last updated: February 2026

Kenmore model numbers are read left to right; the first 3 digits identify the manufacturer, and the remaining digits narrow down the product design and version. For your Kenmore side-by-side refrigerator, 10651793412 starts with 106, which is the manufacturer prefix used on many Kenmore refrigerators.

Where to find the model number on a refrigerator

We recommend checking these common locations on Kenmore side-by-side units:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• On the door frame behind the crisper drawers
• On the cabinet frame behind the toe grille (kick plate)
• On the back of the refrigerator near the power cord

For diagrams and label-location notes specific to this model family, use the 10651793412 owner's manual.

How the number is typically structured

Kenmore model numbers often follow this pattern:

Section	Example from 10651793412	What it tells you
Manufacturer prefix	106	Who built the unit for Kenmore
Base model + features	517934	Platform and feature set
Version/revision	12	Engineering or production variation

Why the prefix matters when ordering parts

The prefix helps us match the correct parts list and diagrams, especially for items that vary by design revision.

• Water system parts can differ by prefix and revision (filter housing, valve, tubing)
• Ice maker and dispenser parts can vary by platform
• Door bins, shelves, and drawers must match the exact liner and rail design
• Control boards and light boards are model-family specific

If you are replacing a water filter on this model, the Kenmore refrigerator water filter 9081 is a common match for Kenmore 106-prefix refrigerators.

Why it matters

Using the full model number (all digits) prevents ordering the wrong refrigerator water filter, ice maker assembly, or electronic control board; small suffix differences can change fit and wiring.

Last updated: February 2026

For Kenmore model 10651793412, the exact height, width, and depth are listed in the product specifications section of the 10651793412 owner's manual. Use those published measurements (not a generic “Kenmore Elite” size) so your refrigerator fits your opening and the doors clear nearby walls.

Where to find the exact dimensions for model 10651793412

In the 10651793412 owner's manual, look for a section labeled Product dimensions, Product specifications, or Installation requirements. That section typically lists:

• Overall width
• Overall height (often to top of hinge)
• Overall depth (often with and without handles)
• Clearance requirements (sides, top, and back)
• Door swing clearance (space needed to open doors fully)

How to measure your space (so the manual specs match real life)

Even with the published dimensions, we recommend measuring your opening and the delivery path.

• Measure opening width at the front and back (cabinets are not always square)
• Measure opening height to the lowest overhead cabinet or soffit
• Measure opening depth to confirm the unit will not block walkways
• Check door swing so bins and drawers can open fully
• Measure doorways and hall turns for delivery clearance

What you’re checking	Use this measurement	Why it matters
Fit in the opening	width, height, depth from the manual	prevents installation surprises
How far it sticks out	depth with handles	avoids blocking aisles
Usability	door swing clearance	ensures drawers and bins pull out

Why it matters

“Kenmore Elite” covers many refrigerator styles and sizes; dimensions vary widely. Using the model-specific specs for 10651793412 prevents problems like doors hitting walls, drawers not opening, or the cabinet sitting too far forward.

Last updated: February 2026

On Kenmore model 10651793412, the SY EF (or 5Y EF) error code points to a problem in the evaporator fan circuit, which means the freezer evaporator fan is not running correctly or the control is not sensing it. Use the troubleshooting steps in the 10651793412 owner's manual to confirm the exact checks for your version.

What to check first (fast, no parts)

• Power reset: Unplug the refrigerator for 2 minutes, then restore power.
• Freezer airflow: Make sure vents are not blocked by packages or ice buildup.
• Door switch: Press the freezer door switch; the fan should run when the switch is closed (on many models).
• Ice/frost buildup: Heavy frost on the rear freezer panel often indicates a defrost or airflow issue.
• Fan noise: Listen for rubbing, clicking, or a stalled fan (ice can contact the blade).

Likely causes and what they mean

Likely cause	What you typically notice	What to do next
Ice blocking the fan	Buzzing or intermittent fan, frost buildup	Defrost the freezer, then recheck airflow
Failed evaporator fan blade or fan motor issue	No airflow, warmer freezer, SY EF returns	Inspect fan area; replace damaged parts as needed
Wiring/connector problem	Code appears after moving unit or door work	Check harness connections for looseness or corrosion
Control not reading fan feedback	Fan runs but code persists	Follow diagnostic steps in the manual

Parts that commonly relate to SY EF symptoms

These parts can be involved when the fan cannot move air or the refrigerator cannot maintain temperature:

• Refrigerator evaporator fan blade WP2169142 (blade damage, rubbing, or ice contact)
• Refrigerator electronic control board WPW10366605 (fan circuit control or feedback issues)
• Refrigerator defrost bi-metal thermostat WPW10225581 (defrost problems can lead to frost that stops airflow)

Why it matters

The evaporator fan moves cold air through the freezer and into the fresh food section. When the fan circuit fails, temperatures rise, ice production drops, and frost can build up quickly, which can lead to food spoilage.

For model-specific diagnostics and any built-in test steps, follow the Kenmore 106 model refrigerator error codes guide alongside your manual.

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life. For a Kenmore 10651793412 side-by-side refrigerator, reaching the high end of that range is common when airflow stays strong, doors seal tightly, and the cooling system is kept clean; see the 10651793412 owner's manual for model-specific care guidance.

Typical lifespan ranges (what we see most often)

Appliance type	Typical lifespan	What usually ends it first
Side-by-side refrigerator	10 to 15 years	Sealed system wear, control issues, airflow problems
Top-freezer refrigerator	12 to 18 years	Thermostat/control wear, door seal leaks
French door refrigerator	10 to 15 years	Ice maker and dispenser system wear

What extends the life of your Kenmore 10651793412

• Clean dust from the condenser area regularly so the compressor runs cooler.
• Keep door gaskets clean and sealing; warm air leaks force longer run times.
• Maintain steady temperatures (about 37°F fresh food and 0°F freezer).
• Avoid overpacking; blocked vents reduce airflow and cause warm spots.
• Replace the water filter on schedule to protect the dispenser and ice maker; use the Kenmore refrigerator water filter 9081.

Quick “repair or replace” checklist

Use this to decide whether a repair is worth it on an older unit:

• Good candidate to repair: cooling is mostly normal, issue is isolated (ice maker, light, bin, gasket).
• Consider replacement: repeated warm temps, loud compressor, or multiple major parts failing.
• Always fix first: simple airflow and maintenance issues (dirty coils, blocked vents, poor door seal).

Why it matters

A refrigerator that runs hot or runs constantly ages faster. Basic maintenance reduces compressor run time, helps food stay safe, and prevents common failures in the ice maker and water dispenser system.

Last updated: February 2026

On a Kenmore side-by-side refrigerator like model 10651793412, the model number is printed on the appliance identification label, usually inside the fresh food (refrigerator) compartment on a side wall or near the ceiling. Check the label for both the model and serial number.

Most common label locations to check

Look for a white or silver sticker or plate in these spots:

• Inside the refrigerator section on the left or right interior wall
• On the ceiling of the fresh food compartment near the light housing
• Behind the crisper drawers on the side wall
• On the door frame (the vertical frame the door seals against)
• Less commonly, inside the freezer compartment on an interior wall

For model-specific diagrams and label callouts, use the 10651793412 owner's manual.

What the model and serial label looks like

The ID label typically includes both fields together:

Field on label	What it’s used for	Example format
Model number	Matching parts and diagrams	10651793412
Serial number	Date/production tracking	Letters plus numbers

Why it matters

We use the model number to match the exact Kenmore parts that fit your refrigerator, such as the correct water filter, ice maker assembly, or control board. A single digit difference can change the compatible part list.

Quick tip before you order parts

• Write the model number exactly as shown on the label
• Take a clear photo of the label for reference
• Use the model number when selecting parts like the Kenmore refrigerator water filter 9081

Last updated: February 2026