Kenmore Elite 79572049316 refrigerator Parts

To raise your Kenmore Elite refrigerator model 79572049316 off the floor, we adjust the two front leveling legs. Turn a leveling leg left to raise that side and right to lower it; raise both sides evenly so the cabinet stays stable and the doors close properly (see the owner's manual).

Quick steps (leveling legs)

• Unplug the refrigerator if you need to pull it out for access.
• Remove the toe grille or lower front cover (if equipped) to reach the leveling legs.
• Use an 11/16-inch wrench or a flat-blade screwdriver (as specified for this model).
• Turn the left leveling leg and right leveling leg to the left (counterclockwise) to raise.
• Have a second person push back on the top of the refrigerator to reduce weight on the legs.
• Recheck that both fresh food doors close easily; if needed, raise the front slightly less and tilt the cabinet a bit to the rear.

Door closing and alignment tips

Raising the front changes door swing and sealing. After leveling, confirm the doors are even and closing smoothly.

What you notice	What to adjust	What to do
Refrigerator rocks	Leveling legs	Raise the low side until stable
Doors do not close easily	Front-to-back tilt	Lower the front slightly or raise the rear tilt by adjusting both legs evenly
Gap between doors is uneven	Bottom hinge adjustment nut	Turn the hinge nut to raise or lower the door until aligned

When raising it “a lot” is not recommended

Leveling legs are designed for leveling and minor height changes, not for lifting the refrigerator several inches. If you need significant clearance (for flooring transitions, for example), use a properly rated appliance platform that keeps the refrigerator level and does not block airflow.

Why it matters

Correct leveling helps the door gaskets seal, prevents vibration noise, and reduces strain on hinges and the ice maker and dispenser system.

Last updated: February 2026

Common issues on the Kenmore Elite 79572049316 bottom-mount refrigerator include warm temperatures from airflow or defrost problems, ice maker output problems, water dispenser leaks or low flow, doors that do not seal or close correctly, and normal-to-loud operating noises. Our owner's manual troubleshooting tables help you match symptoms to the right checks.

Most common symptoms and what they usually point to

• Not cooling or weak cooling: dirty condenser area, restricted airflow, evaporator fan or defrost system trouble
• Frost buildup or ice crystals: frequent door openings, door not closing, or control settings too cold
• Ice maker not making enough ice: high demand, water supply issue, or ice bin/shutoff sensor obstruction
• Water leaking or dispenser issues: kinked line, clogged filter, or a failing inlet valve
• Noises (clicking, rattling, whooshing, gurgling): often normal refrigerant flow, fans running, or the unit not level

Quick checks we recommend first (before replacing parts)

• Confirm the refrigerator is not installed where temperatures drop below 55°F (13°C); cold locations can cause food to freeze in the fresh food section.
• Reduce long or frequent door openings; warm, humid air drives frost and temperature swings.
• Make sure doors close fully: clear packages, reseat bins and drawers, and level the cabinet.
• If the door is hard to open right after closing, wait about a minute; air pressure equalizes and the door opens easier.
• For ice production complaints, allow a full 24 hours after changes; many units make about 100 cubes per day under normal conditions.

Parts that commonly solve these problems (when diagnosis confirms failure)

Symptom	Common part to check	Example part for this model
Low water flow, slow ice fill, leaking at valve	Water inlet valve	Refrigerator water inlet valve AJU72992603
Bad taste/odor, reduced flow	Water filter	Genuine Kenmore refrigerator water filter 9690 AGF80300801
Door light issues, unit thinks door is open	Door switch	Refrigerator door switch 6600JB1010A
Warm temps with heavy frost patterns	Defrost sensing issues	Refrigerator defrost sensor assembly 6615JB2005R

Why it matters

Cooling, ice, and water problems often share the same root causes: airflow restrictions, door sealing issues, or water supply restrictions. Doing the quick checks first prevents unnecessary part replacement and helps protect food temperatures.

Last updated: February 2026

On Kenmore Elite model 79572049316, the model and serial number are printed on an identification label inside the fresh food (refrigerator) compartment, on the interior liner. We use that label information to match the correct parts, diagrams, and troubleshooting steps for your exact refrigerator.

Most common places to check

Look for a paper or foil label in one of these spots:

• Inside the refrigerator compartment on a side wall (interior liner)
• On the ceiling area inside the fresh food section
• Behind or near the crisper drawers (you may need to slide drawers out)
• Along the door frame area when the refrigerator door is open
• On the inside wall near the bottom front (above the kick plate area)

How to find it quickly (and avoid missing it)

• Use a flashlight; labels can be low-contrast or partially hidden by shelves
• Remove the lower bins or crisper drawers if they block the interior liner
• Wipe condensation or residue off the liner so the print is readable
• Write down both the model number and serial number; both matter for parts lookups

What the label typically includes

Label item	What it’s used for
Model number	Identifies the exact design series (parts compatibility)
Serial number	Helps narrow production variations within the model
Electrical ratings	Confirms power requirements for safe operation

Why it matters

Kenmore 795-series bottom-mount refrigerators can have small design changes by production run. Using the model and serial number from the interior liner helps us match the correct components (like a water filter, door switch, or control board) the first time.

For a diagram-style overview of where the identification label is located, check the owner's manual.

Last updated: February 2026

On Kenmore Elite model 79572049316, the water filter is located inside the fresh food (refrigerator) compartment, typically in the upper-left area behind a small filter cover. You access it from the front by opening the cover and pulling the filter down to remove it (have a cup ready for a small drip). See the 79572049316 owner's manual for the exact location diagram and removal steps.

How to find it quickly

• Open the refrigerator (top) door, not the freezer drawer.
• Look along the upper-left interior wall/ceiling area.
• Find the small water filter cover and pinch the sides to open it.
• Lower or remove the top left shelf if it blocks the filter from rotating down.
• Pull the filter downward to remove it; keep it upright to avoid spills.

What to expect when you remove the filter

A small amount of water can drain when the cartridge comes out. Keep a cup or towel under the front edge of the filter cover.

Item	What you’ll notice	What to do
Filter cover	Small door/cover you pinch open	Open fully before pulling filter down
Drips	About an ounce of water is common	Catch with a cup, wipe up after
Shelf interference	Filter may not clear the shelf	Lower/remove the top left shelf

After you install the new filter

• Install the new cartridge fully and close the filter cover.
• Flush the system by dispensing about 2.5 gallons of water (about 5 minutes total).
• Use 30 seconds on, 60 seconds off cycles to avoid running continuously.

Why it matters

Finding the correct filter location helps prevent cracked housings, leaks, and poor water flow. A properly seated filter also helps the ice maker and dispenser work consistently.

If you need the correct replacement cartridge for this model, match by model number and use the exact filter listed for 79572049316, such as the genuine Kenmore refrigerator water filter 9690 AGF80300801.

Last updated: February 2026

Yes. The Kenmore Elite 795.72049316 is part of Kenmore’s premium (Elite) refrigerator line, and it’s built to deliver higher-end features and performance than basic models. For model-specific features and operating details, use the owner's manual.

What “high end” means for this model

Kenmore Elite models are positioned above standard Kenmore refrigerators. In practical terms, that usually means a stronger feature set, more refined design, and more advanced controls.

Common “premium” traits you’ll typically see in this class include:

• Bottom-freezer layout with larger fresh-food access up top
• More precise electronic temperature control
• Through-the-door ice and water features (varies by configuration)
• Multi-zone airflow and humidity management for fresher food storage
• Higher parts complexity (more sensors, switches, and control components)

How to judge it quickly (features vs. ownership)

Use this checklist to decide if it fits your definition of “high end”:

• Performance: Holds steady temperatures and recovers quickly after door openings
• Convenience: Ice and water dispensing, adjustable shelving, drawer flexibility
• Serviceability: Parts availability for common repairs (filters, valves, switches)
• Long-term cost: Premium parts can cost more when repairs are needed

What you’re comparing	Typical “high end” expectation	What to check on 795.72049316
Filtration	Strong taste and odor reduction	Replace the filter on schedule; see genuine Kenmore refrigerator water filter 9690 AGF80300801
Ice and water reliability	Consistent flow and ice production	Water line condition, valve operation, dispenser switches
Cooling system	Efficient, stable cooling	Condenser cleanliness, fan operation, sensor accuracy

Why it matters

“High end” refrigerators like the Kenmore Elite 795.72049316 often deliver better day-to-day usability, but they also rely on more components (water inlet valve, door switch, control board, sensors). Keeping up with maintenance, especially filtration and airflow, helps protect performance.

Last updated: February 2026