Kenmore 11027892791 washer Parts

Your Kenmore washer model number is printed on the appliance’s model and serial tag; for Kenmore washers it often starts with 110 (like 11027892791). On most top-load Kenmore washers, we find it under the lid near the tub opening; on front-load models, it’s usually inside the door opening.

Where to look (fast checklist)

• Top-load washer: Lift the lid and check the rim around the tub opening.
• Front-load washer: Open the door and check the door opening frame.
• Back panel: Look near the power cord entry or rear cabinet.
• Control console area: Check behind the console or along the cabinet edge.
• Paperwork: Match the tag to your receipt or service paperwork.

What the model number looks like

Kenmore washer model numbers are commonly 11 characters or longer and may be all numbers (common on 110-prefix models) or a mix of letters and numbers on some series.

What you see on the tag	What it means	What to do next
110.27892791 (with a dot)	Same model as 11027892791	Use the digits without punctuation when searching parts
11027892791 (no dot)	Full model number	Use this exact number to match parts
Extra characters after the model	Revision/series info	Keep it for service reference, but start with the full model

Why it matters

We use the model number to match exact-fit parts for your Kenmore washer, such as the correct lid switch, drain pump, or agitator components. Even small model-number differences can change the fit of parts and wiring connections.

If the washer will not start and you suspect the tag is missing

A no-start symptom is often related to a failed lid switch on many top-load designs; if you are troubleshooting that path, the washer lid switch WP3949238 is a common model-matched part for Kenmore 11027892791.

Last updated: February 2026

Yes; repairing a Kenmore washer is worth it when the fix is a common wear part and the total repair cost is clearly less than replacing the machine. For Kenmore model 11027892791, many frequent failures are inexpensive and restore full washing and spinning performance.

Quick way to decide (our rule of thumb)

• Repair it when the problem is isolated (won’t fill, won’t drain, won’t spin, agitator not moving).
• Repair it when the part is a typical wear item (lid switch, drain pump, motor coupling, clutch).
• Repair it when the tub and cabinet are solid (no major rust-through, no severe tub damage).
• Replace it when multiple major systems are failing at once (leaks plus drive issues plus electrical problems).
• Replace it when the repair requires major teardown and multiple high-cost parts.

Common repairs that are usually “worth it”

These are frequent on direct-drive Kenmore top-load washers and are often straightforward:

Symptom	Likely cause	Example part for model 11027892791
Won’t spin or stops mid-cycle	Lid safety circuit issue	Washer lid switch WP3949238
Won’t drain or drains slowly	Pump jammed or worn	Washer drain pump WP3363394
Agitator moves poorly or “ratchets”	Worn agitator dogs	Agitator dog 80040
No agitation/spin but motor runs	Worn motor coupling	Coupling 285753A
Spins weak, burning smell, noisy spin	Worn clutch	Clutch 285785

Why it matters

A targeted repair keeps your Kenmore 11027892791 running reliably and avoids the learning curve and installation costs that often come with a new washer. Fixing the correct part also prevents secondary damage (for example, a weak drain can lead to repeated out-of-balance spins).

What we recommend before you buy parts

• Confirm the symptom (fill, agitate, drain, spin) and when it happens in the cycle.
• Check for simple causes first: overloaded tub, kinked drain hose, loose lid strike.
• Inspect for water leaks under the washer after a cycle.
• If the washer won’t spin, test the lid switch function early; it is a common no-spin cause.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For your Kenmore model 11027892791, reaching the high end of that range usually comes down to load size, water quality, and keeping wear items in good shape, especially the drive and drain components.

What affects lifespan the most

• Overloading (stresses the drive system and suspension)
• Unbalanced loads (increases vibration and tub wear)
• Hard water (can shorten inlet valve life and reduce cleaning performance)
• Drain restrictions (overworks the pump and can cause no-drain symptoms)
• Worn drive parts (causes poor agitation or spin)

Maintenance that adds years

• Keep loads evenly distributed; wash bulky items in smaller loads.
• Use the right detergent amount; excess suds can slow draining.
• Check hoses periodically for bulges or leaks; replace at the first sign of wear.
• If the washer struggles to drain, inspect the pump and related connections; the washer drain pump WP3363394 is a common wear item on many Kenmore top-load designs.
• If agitation becomes weak or the top of the agitator stops “ratcheting,” inspect the agitator dog 80040.

Common “end-of-life” symptoms and likely causes

Symptom	What it often points to	Example part to check
Won’t spin or stops mid-cycle	Lid switch or drive issue	Washer lid switch WP3949238
Won’t drain or drains slowly	Pump or blockage	Washer drain pump WP3363394
Agitator moves poorly	Agitator wear parts	Agitator dog 80040
Loud grinding in spin	Drive block or gear case wear	Washer drive block WP389140

Why it matters

Knowing the typical 10 to 15 year lifespan helps you decide whether to repair or replace. If your 11027892791 is near that age and needs a major drive repair (gear case, basket drive, clutch), comparing repair cost to replacement value usually makes the decision clearer.

Last updated: February 2026