Whirlpool ED5FTGXKQ00 side-by-side refrigerator Parts

Whirlpool model ED5FTGXKQ00 is a full-size side-by-side refrigerator; the exact exterior dimensions and required clearances are listed in the model’s installation guide. Use those measurements for cabinet fit, door-swing space, and water-line routing for the ice maker and dispenser.

When planning space for ED5FTGXKQ00, we recommend confirming these measurements from the installation guide and then measuring your opening.

• Overall width (cabinet and doors)
• Overall height (including hinges and leveling legs)
• Overall depth (with and without handles)
• Door swing clearance (space to fully open doors and remove bins)
• Ventilation clearance (space above and behind for airflow)

Measure in inches with a tape measure and note both the appliance size and the opening size.

• Measure width at the narrowest point of the opening
• Measure height from floor to the lowest overhead obstruction
• Measure depth to the wall, then account for handles and door swing
• Confirm the refrigerator can be tilted and moved through doorways and hallways

Using the ED5FTGXKQ00 measurements from the installation guide prevents installation problems like doors hitting walls, restricted airflow that causes warm temperatures, and pinched water tubing to the dispenser.

If the doors sag or do not close smoothly, the refrigerator can require more swing space than expected.

• Refrigerator door cam (black) WP2182179 helps the door close and align properly
• Whirlpool refrigerator door gasket, almond 2159075 helps the door seal and sit square
• Refrigerator ice bin WPW10670845 affects usable clearance in the freezer door area

If you are ordering replacement parts for ED5FTGXKQ00, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

The most common problem we see with Whirlpool refrigerators like model ED5FTGXKQ00 is a cooling complaint (warm fridge, soft ice, or temperature swings). In many cases, the root cause is restricted airflow (dirty condenser coils), a defrost problem, or a failed cooling-control part such as a thermostat or fan-related component; our installation guide helps with safe access and setup checks.

• Refrigerator warm, freezer OK: airflow issue between sections, evaporator frost buildup, or evaporator fan problem
• Freezer warm, refrigerator warm: dirty condenser coils, condenser fan issue, sealed-system/compressor issue
• Water under the refrigerator: clogged/iced defrost drain or a water supply leak
• Ice maker slow or no ice: water supply restriction, inlet valve issue, ice maker component failure
• Clicking or humming with poor cooling: start components or compressor-related issue

1. Confirm temperatures: set freezer near 0°F and refrigerator near 37°F.
2. Clean condenser coils: dust buildup is a top cause of weak cooling.
3. Check door sealing: look for gaps, torn gasket, or doors not closing fully.
4. Listen for fans: evaporator fan (freezer) and condenser fan (near compressor) should run at times.
5. Look for frost on the freezer back wall: heavy frost often signals a defrost system problem.

If the basic checks point to a component failure, these model-matched parts are common solutions:

Cooling, ice, and leak problems often share the same few causes: airflow, defrost performance, and water supply control. Catching a dirty coil, a failing thermostat, or a weak inlet valve early helps prevent food spoilage and repeat icing or leaking.

• For model-specific handling, leveling, and connection checks, use the installation guide.
• If you suspect an electronic fault or display code on a Whirlpool unit, use Whirlpool refrigerator error codes.

You can order replacement parts for Whirlpool ED5FTGXKQ00 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Most Whirlpool refrigerators, including side-by-side models like ED5FTGXKQ00, last 10 to 18 years. With steady maintenance (clean airflow, good door sealing, and stable temperatures), it’s common to reach the upper end of that range before major sealed-system repairs become likely.

A refrigerator’s life is usually determined by heat management, door sealing, and how hard the compressor has to work.

• Dirty condenser area makes the compressor run hotter and longer
• Worn door gaskets let warm, humid air in and create extra frost load
• Ice maker and dispenser use adds wear to water and ice components
• Frequent door openings and overpacking reduce airflow
• Power surges and low voltage can stress the compressor and start components

We recommend these habits to extend the life of your Whirlpool side-by-side refrigerator:

• Vacuum dust from the condenser area regularly (more often with pets)
• Keep vents inside the fresh food and freezer sections unblocked
• Confirm doors close on their own and seal evenly all the way around
• Replace clogged water filtration on schedule to protect valves and flow
• Fix small leaks quickly to prevent corrosion and ice buildup

Some problems feel like the refrigerator is failing, but they are often repairable with standard parts.

Knowing the typical lifespan helps you decide whether to repair or refresh. If your ED5FTGXKQ00 is under about 15 years old, replacing a thermostat, inlet valve, or defrost part is often a practical way to restore reliable cooling.

For model-specific handling, leveling, and hookup guidance, follow the installation guide. For replacement parts listed for this model, you can order from the parts list for ED5FTGXKQ00 or search by model on Sears PartsDirect.

Last updated: February 2026