Kenmore Elite 79097003210 electric range Parts

No. The Kenmore Elite electric range model 79097003210 does not use a single dedicated “reset” button; when the control needs a reset, we restore normal operation by power-cycling the range (turning power off at the breaker, then back on) and then rechecking oven and surface functions per the installation guide.

How to reset (power-cycle) the range safely

• Turn OFF the range circuit breaker (240V) for 2 to 5 minutes.
• Turn the breaker ON.
• Set the clock (if needed) and test Bake and Broil.
• If the display is blank or erratic, verify the power cord or wiring connections are tight.
• If you recently moved or installed the range, confirm the rear access cover is installed and wiring is routed correctly.

If the “reset” you need is after an install or power issue

The most common “reset” problems on an electric range are actually power-connection issues at the terminal block. The installation instructions for this model emphasize keeping the factory terminal block nuts tight and using the correct 3-wire or 4-wire connection method.

Symptom after power-cycle	Most likely area to check	Common fix path
No power, dead display	House breaker, terminal block	Reset breaker; inspect terminal block and cord connections
Oven heats wrong temp	Oven temperature sensor circuit	Test sensor; replace if out of spec
Surface element won’t regulate	Infinite switch/control	Test switch; replace if contacts are burned

Parts that commonly solve “won’t work after reset” complaints

If power is correct and the issue is isolated to one function, these model-compatible parts are common fixes:

• Frigidaire range oven temperature sensor 316490000 (baking temperature problems)
• Frigidaire range small surface element control switch 316436000 (small burner stuck high/low or won’t heat)
• Universal/multiflex (frigidaire) range terminal block 5303935271 (burned terminal connections, intermittent power)

Why it matters

A power-cycle clears minor control glitches, but it will not fix a loose or overheated terminal connection. On a 240V range, a weak connection can cause partial power (lights work but no heat) or repeated failures.

You can order replacement parts for model 79097003210 from the parts list for this range, or search by model number on Sears PartsDirect.

Last updated: February 2026

Kenmore model numbers tell us who built the appliance and which parts fit. For your Kenmore Elite electric range, the full model number 79097003210 (often shown as 790.97003210) identifies the manufacturer family and the exact version, which is what we use to match the correct range parts.

How Kenmore model numbers are structured

Most Kenmore model numbers have two key pieces:

• 3-digit prefix: identifies the manufacturer family (for ranges, 790 is commonly associated with Frigidaire-built Kenmore models)
• Remaining digits: identify the base model and production variations (features, finishes, revisions)
• Full number matters: even one digit difference can change which bake element, control board, or sensor fits

For this model, you will typically see it written like this:

What you see on the label	What it means for parts
790.97003210	Prefix 790 plus the full model identifier
79097003210	Same model number without the dot

Where to find the model number on a range

On a Kenmore Elite freestanding electric range like 79097003210, the model/serial tag is commonly found in one of these spots:

• Along the oven door frame (visible when you open the oven door)
• On the frame behind the storage drawer or warming drawer
• On the back panel of the range

If the range has been moved for installation, confirm it is secured properly afterward; the installation guide explains anti-tip bracket placement and verification.

Why the full model number matters when ordering parts

Using the complete model number helps us match parts that affect heating accuracy, safety, and performance, such as:

• Frigidaire range oven temperature sensor 316490000 (helps regulate oven temperature)
• Frigidaire range bake element 316505500 (primary heat source for baking)
• Frigidaire range oven control board and clock 316577094 (controls bake, broil, timing, and temperature logic)

If you are shopping beyond the parts list for this model, you can also search by model number on Sears PartsDirect.

Quick tips to avoid a mismatch

• Copy the model number exactly as printed (include all digits)
• If there is a dot (example: 790.97003210), record the digits on both sides
• Match parts by model number first, then confirm symptoms (no heat, uneven baking, overheating)

Why it matters: Kenmore uses multiple manufacturers and revisions; the prefix and full digit string are what keep you from ordering a part that looks right but will not mount, wire in, or calibrate correctly.

Last updated: February 2026

A Kenmore Elite electric range like model 79097003210 typically lasts 13 to 15 years with normal household use and basic maintenance. Keeping the oven temperature accurate, door sealed, and electrical connections tight helps you reach the full service life; see the owner's manual for care and operating guidance.

What affects lifespan the most

• Heat stress and heavy use: frequent high-heat baking, broiling, and self-clean cycles age components faster.
• Power quality and wiring: loose connections can overheat and damage wiring and controls.
• Door seal condition: heat loss forces longer run times and can overwork elements.
• Sensor and control accuracy: temperature swings increase cooking time and wear.
• Cleaning habits: spills left to bake on can cause odors, smoke, and corrosion.

Parts that commonly drive “end of life” decisions

If performance drops, these are the most common repair points on electric ranges:

Symptom	Common cause	Example part for this model
Oven too hot or too cool	Temperature sensor drifting	Frigidaire range oven temperature sensor 316490000
No bake heat or weak baking	Bake element failing	Frigidaire range bake element 316505500
Poor broiling or no broil	Broil element failing	Range broil element 316203301
Heat leaking, long preheat	Worn door seal	Frigidaire range oven door seal 316405000

Simple maintenance that extends service life

• Avoid running self-clean back-to-back; let the range cool fully between cycles.
• Keep the oven bottom panel and racks clean so airflow stays consistent.
• If preheat times suddenly increase, check for a weak element or a leaking door seal.
• Replace a burned-out oven light with the correct wattage, such as appliance light bulb, 40-watt 316538904.
• If the range is moved, follow the anti-tip and electrical steps in the installation guide.

Why it matters

Knowing the 13 to 15 year average helps you decide whether to repair (often cost-effective for elements, sensors, and seals) or plan for replacement when major electrical or control issues stack up.

Last updated: March 2026