Kenmore 25363702201 refrigerator Parts

For Kenmore top-mount refrigerator model 25363702201, the exact exterior dimensions vary by the specific 253-series design; the most reliable way to confirm your unit’s height, width, and depth is to match the measurements and clearance notes in the owner's manual.

Measure with doors closed, then add space for airflow and door swing.

• Width: measure the cabinet left-to-right (not the door handles)
• Height: floor to top of cabinet (include hinge cover if it sits above the cabinet)
• Depth: front of cabinet to back (then measure to the front of handles separately)
• Door swing clearance: allow extra space on the hinge side if near a wall
• Ventilation clearance: keep required gaps so the compressor can cool properly

Your Kenmore 25363702201 needs clearance for air circulation and easier installation. The manual calls out these typical minimum clearances:

If your refrigerator has exposed condenser coils/tubing on the back, allow additional space above the cabinet as noted in the manual.

Correct sizing prevents overheating, helps the doors close properly, and reduces frost and temperature problems. Tight installs often lead to poor airflow, warm temperatures, and higher energy use.

“253” is a Kenmore model prefix used across many refrigerator styles and sizes. Always use the full model number 25363702201 when checking specs, ordering parts, or comparing dimensions.

Last updated: February 2026

Kenmore is a brand name, and different companies have manufactured Kenmore refrigerators over the years. For model 25363702201, the 253 model prefix identifies it as a refrigerator built for Kenmore by Frigidaire (Electrolux/Frigidaire).

You can verify the manufacturer by checking the model and serial label inside the fresh food compartment (the use and care guide notes the serial plate is inside the refrigerator compartment). See the owner's manual.

• Look for the full model number: 25363702201
• Confirm the prefix: 253
• Check for a second label that may list a manufacturing source or electrical ratings
• Record the serial number for parts matching and service history

Knowing who built the unit helps match the correct design family for parts like the defrost system, door hardware, and cooling components.

Common part categories where this matters:

• Defrost parts (heater, thermostat, timer)
• Door seal and door closure parts
• Evaporator fan components
• Electrical harnesses and control box parts

If you are ordering repair parts for Kenmore 25363702201, match by model number first, then choose the exact part from the parts list. For example, the refrigerator defrost bi-metal thermostat 5303918202 is one of the defrost components used on many top-mount designs.

Kenmore model numbers are the fastest way to identify the original manufacturer; that prevents ordering the wrong gasket, timer, or electrical part when multiple Kenmore versions look similar.

Last updated: February 2026

On a Kenmore 25363702201 top-mount refrigerator, the upper compartment is the freezer. It is designed to keep foods frozen, and its temperature is controlled separately from the fresh food (refrigerator) section on many models.

The freezer compartment is where your refrigerator maintains below-freezing temperatures for long-term storage. In many top-mount designs, it also houses key cooling and defrost components.

Common freezer-related functions include:

• Freezing and storing food at stable, low temperatures
• Helping cool the refrigerator section by circulating cold air
• Running automatic defrost cycles to prevent frost buildup
• Supporting an optional automatic ice maker on some models

Your manual explains that the refrigerator and freezer controls can affect temperatures differently: the refrigerator control can influence both compartments, while the freezer control changes only freezer temperature on some models. For exact control locations and recommended starting settings, use the owner's manual.

Knowing the upper section is the freezer helps when you are troubleshooting issues like “freezer cold but fridge warm,” airflow problems from blocked vents, or normal sounds during the defrost cycle (clicking, sizzling, water draining).

Last updated: February 2026

To tell what model Kenmore refrigerator you have, look for the model and serial plate inside the fresh food (refrigerator) compartment. On Kenmore model 25363702201, the Use & Care Guide notes the serial plate is located inside the refrigerator compartment; record the full model number exactly as shown and match it to your parts list and owner's manual.

Most Kenmore top-mount refrigerators place the model/serial plate in one of these spots:

• Inside the refrigerator compartment on a side wall
• On the ceiling of the fresh food compartment
• Behind or beside the crisper drawers
• Along the door frame (open the door and check the inner liner edges)
• Near the bottom front area behind the toe grille (on some designs)

Use the complete model number, including every digit. For this refrigerator, the model format starts with 253 (example: 25363702201). That full number is what we use to match the correct shelves, gaskets, controls, and sealed system parts.

The manual recommends cleaning the serial plate with only soap and water. After cleaning, try these steps:

• Use a flashlight held at an angle to make faint printing stand out
• Take a close-up photo and zoom in
• Write down the model number first, then the serial number
• Avoid abrasive cleaners that can remove the ink

Kenmore refrigerators share similar styling across many model families, but parts like a door gasket, defrost timer, or light bulb can vary by revision. Using the exact model number helps ensure the replacement part fits and the repair instructions match your unit.

Last updated: February 2026

Yes. We still offer replacement parts for Kenmore refrigerators, including model 25363702201. You can match parts by model number and then choose the exact component you need (like a light bulb, door gasket, or defrost part) to restore proper cooling and door sealing.

Use your model number to avoid ordering a similar-looking part that will not fit.

• Confirm the full model number on the rating label (inside the fresh food section)
• Use the model-based parts list to narrow results to exact-fit items
• Compare the part name and part ID before ordering
• Check whether the part is listed as In Stock or Check Availability
• Use the diagrams to confirm location and mounting style

For model-specific part identification and basic operating guidance, use the owner's manual.

These are examples of parts available for Kenmore 25363702201 that often solve everyday issues:

• Interior light not working: refrigerator light bulb 316538904
• Frost buildup or warm freezer: refrigerator defrost bi-metal thermostat 5303918202 or refrigerator defrost heater 5303918203
• Noisy fan or poor airflow: refrigerator evaporator fan blade 5308000010
• Door not sealing well: refrigerator gasket 241872501 (availability varies)

Using the correct Kenmore 25363702201 parts helps maintain safe food temperatures, reduces compressor run time, and prevents problems like frost buildup, leaks, and premature wear on the sealed refrigeration system.

Last updated: February 2026