Kenmore 25357388602 refrigerator Parts

On Kenmore side-by-side refrigerator model 25357388602, the model number is printed on the serial plate located inside the refrigerator (fresh food) compartment. Open the refrigerator door and look along the interior walls for the rating label; it lists the model and serial numbers together.

Where to look (fast checklist)

• Open the refrigerator (not freezer) door
• Check the inside walls of the fresh food compartment
• Look for a serial plate/rating label with printed text
• Find the line that starts with “Model Number:” (often begins with 253 or 970)
• Record the serial number and purchase date while you are there

What the label looks like

The serial plate is a printed rating label that includes multiple fields. Use this quick guide:

Label field	What it’s used for	Example format
Model number	Matching parts and diagrams	25357388602
Serial number	Production info, service history	Letters and numbers
Purchase date	Warranty and records	Month/day/year

Tips for reading and protecting the serial plate

• Use good lighting and wipe dust gently so the text is readable
• Clean the label with soap and water only (avoid solvents)
• Take a photo of the label for future parts orders
• When ordering parts, match the full model number exactly

Why it matters

The model number on the serial plate is the key to getting the correct Kenmore refrigerator parts (like a water filter, door bin, or gasket) and to following the right procedures in the 25357388602 owner's manual.

Last updated: February 2026

Yes, replacing the ice maker is usually worth it on Kenmore model 25357388602 when the refrigerator is cooling well and the problem is isolated to ice production or dispensing. This model’s ice maker is designed to start making ice within about 24 hours after proper cooling, so a failed ice maker or jammed bin is often a fixable, targeted repair (not a reason to replace the whole refrigerator). See the 25357388602 owner's manual for ice maker operation and troubleshooting.

Quick decision guide

Replace the ice maker (or related parts) when:

• The freezer temperature is cold enough but ice production is low
• The ice maker cycles but does not harvest or fill correctly
• The dispenser jams repeatedly due to bin or auger issues
• You use ice daily and want the built-in dispenser working

Consider replacing the refrigerator when:

• Cooling performance is poor in both compartments
• You have repeated sealed-system issues (compressor, evaporator, condenser)
• Multiple major systems are failing at the same time

What we check first (before buying an ice maker)

Many “bad ice maker” symptoms are caused by water supply, temperature, or a clogged filter.

• Confirm the wire signal arm is down (ON) and not blocked
• Verify the freezer is cold enough; warm temps reduce ice output
• Make sure the household water valve is fully open
• If water dispenses slowly, replace the filter; a clogged filter can reduce ice maker fill
• If cubes clump and jam, empty and clean the bin; do not use sharp tools to break ice

Common fixes and likely parts

Symptom	Most common cause	Typical fix
Not enough ice	Warm freezer, restricted water flow	Adjust temps, check valve, replace filter
Ice tastes or smells bad	Old ice, food odors, water quality	Discard ice, clean bin, improve filtration
Dispenser jammed	Clumped ice, infrequent use	Empty bin, dry completely, use ice more often

If your filter is due, start there; for this model, the matching filter is the genuine Kenmore refrigerator water filter WFCB.

Why it matters

An ice maker repair is usually a high-impact, low-disruption fix: you restore daily convenience without replacing a working Kenmore side-by-side refrigerator. Also, this model can take up to about 2 days to fill the bin with no usage, so verifying normal fill timing prevents unnecessary part replacement.

Last updated: February 2026

Your Kenmore refrigerator model 25357388602 has a specific factory-rated capacity (cubic feet), and the most accurate way to confirm it is to read the rating plate inside the fresh food compartment and cross-check the specifications section in the 25357388602 owner's manual.

Fast ways to find the cubic feet (capacity)

• Check the rating plate inside the refrigerator compartment (typically on a side wall); it lists the model and serial information and is the best starting point for exact specs.
• Look in the specifications section of the 25357388602 owner's manual for capacity and dimensions.
• Use the full model number (25357388602) when searching parts and documentation; small digit changes can point to a different cabinet size.
• Measure as a backup only if you cannot access the spec listing; measuring interior space is less accurate because shelves, ducts, and liners reduce usable volume.

Where to look on the refrigerator

The rating plate is located inside the refrigerator compartment. Clean it with mild soap and water only so the printing stays readable.

Capacity lookup vs. measuring (what to expect)

Method	Accuracy	What you get
Rating plate + manual specs	Highest	Factory-rated cubic feet
Model number lookup	High	Capacity tied to that exact model
Interior measuring	Medium	Approximate usable space

Why it matters

Cubic feet affects real-world storage, energy use, and fit. It also helps us match the right replacement parts (like bins, gaskets, and shelves) to Kenmore 25357388602 without ordering the wrong size.

Last updated: February 2026

Yes. We still support Kenmore refrigerator parts, and for Kenmore model 25357388602 you can commonly replace maintenance items like the water filter, door gaskets, light bulb, and ice maker components using the correct model-based part match from the 25357388602 owner's manual.

What parts are typically still available

For this Kenmore side-by-side refrigerator, these are common, high-demand replacements we see customers order:

• Water filter (rear filter style on some models): genuine Kenmore refrigerator water filter WFCB
• Fresh food door seal: refrigerator gasket 241786013
• Freezer door seal: refrigerator freezer gasket 241786014
• Interior light: refrigerator light bulb 316538904
• Ice maker component: ice maker mold 241798231

How to make sure you get the right part

Kenmore model numbers can look similar, so we match parts by the full model number and the part ID.

• Confirm the full model number on the rating label (use 25357388602 exactly)
• Use the part ID when ordering (example: WFCB)
• Compare the part name and where it installs (filter housing, door, freezer bin area)
• Check the manual diagrams and instructions before disassembly

Quick match checklist

What you are replacing	What to match	Example from this model
Water filter	Filter style and cartridge ID	WFCB (Kenmore replacement cartridge 46 9910)
Door seal	Door location and gasket ID	241786013 (refrigerator), 241786014 (freezer)
Light	Base type and appliance location	316538904

Why it matters

Using the correct Kenmore 25357388602 part prevents fit issues, air leaks, and repeat failures. For example, the manual notes the rear water filter system has specific installation and sealing steps (including the O-ring placement) that help prevent leaks and keep water flow steady.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 25357388602 are warm temperatures from airflow problems, water leaks from drain or door-seal issues, and ice maker or dispenser troubles (including ice clumping and jams). Many fixes start with cleaning, checking door closure, and verifying temperature settings in the 25357388602 owner's manual.

Most common symptoms and what usually causes them

• Not cooling or temps too warm: dirty condenser coils, doors opened too often, door slightly open, or controls set too warm
• Moisture or frost inside: hot/humid conditions, door not sealing, frequent door openings, uncovered containers
• Water pooling or leaks: defrost drain restriction, water line connection issues, or a worn door gasket
• Ice maker or dispenser problems: ice clumping from infrequent use or after a power outage; dispenser mechanism jam
• Odd noises: evaporator fan or airflow components cycling, or vibration from the cabinet/lines

Quick checks we recommend first (fast, no parts)

1. Confirm the doors close fully and are not held open by bins or food packages.
2. Set temperatures to typical targets: 0°F freezer, 37°F fresh food; allow 24 hours to stabilize after changes.
3. Clean condenser coils (dirty coils are a common cause of warm temps).
4. Reduce door-open time; warm air drives temperature swings and interior sweating.
5. If ice is clumped or jammed, remove the bin and shake to loosen cubes; never use sharp tools.

When a part is commonly involved

Problem area	What you may notice	Common part to inspect/replace
Door sealing	condensation, frost, warm spots near door	Refrigerator gasket 241786013 or refrigerator freezer gasket 241786014
Ice and water quality/flow	slow water, bad taste/odor, low ice output	Genuine Kenmore refrigerator water filter WFCB
Defrost-related cooling issues	frost buildup, warming over time	defrost thermostat (model-specific), airflow checks

Why it matters

Warm temperatures and moisture usually trace back to airflow and sealing. Fixing door seal gaps, keeping coils clean, and limiting warm-air entry helps the compressor and fans maintain stable temperatures and prevents frost and leaks.

Last updated: February 2026

Kenmore model numbers are read as a full prefix plus a base model plus a suffix; the prefix (often the first 3 digits) identifies the manufacturer, and the remaining digits narrow down the exact design and parts for your specific unit. For your refrigerator, the complete model number is 25357388602 (use it exactly as shown in the 25357388602 owner's manual).

Where to find the model number on a side-by-side refrigerator

We typically see the model and serial tag in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• On the door frame behind the crisper drawers
• On the back of the cabinet near the power cord
• Sometimes behind the toe grille (kick plate)

How to interpret the number (what each section means)

Kenmore numbers are usually structured like this:

• Prefix: identifies who built the appliance for Kenmore (example: 253 is commonly associated with Frigidaire-built Kenmore refrigerators)
• Base model: identifies the platform and major features
• Suffix: identifies revisions such as color, handle style, or production changes

Quick example using your model

Section	Example from 25357388602	What it tells us
Prefix	253	Manufacturer family used for parts lookup
Base model + suffix	57388602	The exact configuration and revision

Why it matters for parts and troubleshooting

Using the full model number prevents mismatches when ordering parts or following repair steps because Kenmore often used similar-looking cabinets with different internal components.

• Parts like the water filter, ice maker components, and door gaskets can vary by revision
• Wiring and dispenser layouts can differ even within the same series
• The correct model number helps match the right diagrams and installation details

If you are ordering a water filter for this refrigerator, the manual calls out Kenmore replacement cartridge 46 9910, which matches the genuine Kenmore refrigerator water filter WFCB.

Last updated: February 2026

The Kenmore side-by-side refrigerator model 25357388602 is typically about 32 inches wide, 65-3/4 inches tall, and 26-5/8 inches deep (cabinet depth). For the exact installed footprint (including handles and door swing clearance), confirm the dimensions in the 25357388602 owner's manual.

Dimensions to plan for

Use these measurements when checking fit through doorways and into the cabinet opening:

• Width: 32 in.
• Height: 65-3/4 in.
• Depth: 26-5/8 in. (cabinet)
• Plan extra space for handles, hinges, and airflow clearance behind the unit
• Plan door swing space so bins and shelves can open fully

What “depth” usually means on a side-by-side

Depth can be listed different ways. Here is how to think about it when measuring your space:

Measurement type	What it includes	Why it matters
Cabinet depth	Box only (no handles)	Helps confirm it fits the cutout
Depth with handles	Cabinet plus handles	Affects how far it sticks out
Depth with doors open	Door swing clearance	Prevents hitting walls/counters

How we recommend measuring your space

• Measure the opening width at the front and back
• Measure height to the lowest overhead cabinet or soffit
• Measure depth from the back wall to the front edge of counters
• Add at least 1 inch total side clearance and 1 inch behind for airflow (typical)
• Confirm you can remove doors if needed; see the 25357388602 installation guide

Why it matters

Correct sizing prevents installation problems like doors that cannot open fully, poor condenser airflow (warm temperatures), and water line kinks that can affect the ice maker and dispenser.

Last updated: February 2026

Most Kenmore side-by-side refrigerators measure about 32 to 36 inches wide overall. For your Kenmore 25357388602, use the exact width and the required installation clearances listed in the 25357388602 owner's manual and the 25357388602 installation guide.

Typical widths (what to expect)

• 32 to 33 inches: common on smaller-capacity side-by-sides
• 35 to 36 inches: most common “full-size” side-by-sides
• Counter-depth: often similar width, but shallower depth front-to-back
• Handles: can add noticeable overall width depending on style

Measurement	How to measure	What it’s used for
Cabinet (case) width	Metal box only, widest point	Fit between cabinets/walls
Width with doors	Doors closed, edge to edge	Clearance for trim and adjacent surfaces
Width with handles	Include the handle projection	Doorway and tight opening checks

How we recommend measuring your refrigerator

• Measure at the widest point across the front with doors closed.
• Measure again including handles (this is the number that usually causes fit issues).
• If the refrigerator sits next to a wall, confirm you have enough space for full door swing.
• Follow the model’s installation instructions for airflow and connection clearance (sides, top, and back vary by design and are specified for the 25357388602).

Why it matters

A refrigerator that is even slightly too wide can be difficult to slide into place; tight door-swing space can also prevent the doors from opening fully and can affect how well the door seals.

Last updated: February 2026

Kenmore is a brand name, and model 25357388602 is part of Kenmore’s 253 model prefix family, which is commonly associated with Frigidaire/Electrolux-built refrigerators. You can confirm the exact identification details for your unit by checking the model and serial tag location described in the 25357388602 owner's manual.

How to confirm on your refrigerator

We recommend verifying using the model and serial information on the serial plate inside the fresh food compartment.

• Open the refrigerator (fresh food) door and look inside for the serial plate
• Record the full model number and serial number exactly as shown
• Keep the purchase date with your records for parts and service
• Use only mild soap and water to clean the serial plate so the printing stays readable

Why the manufacturer matters for parts

Kenmore parts lookups are model-prefix driven. The builder determines which component families fit, such as the ice maker, water filter housing style, and door gasket profile.

What you are doing	What to use	Why it helps
Ordering parts by model	Model number 25357388602	Ensures correct diagrams and fit
Matching a water filter	Cartridge spec in the manual	Prevents leaks and poor flow
Troubleshooting dispenser/ice	Builder-specific design	Speeds up diagnosis

Related parts you may see on this model

If you are ordering common maintenance items for Kenmore 25357388602, these are typical examples from the parts list for this model.

• Genuine Kenmore refrigerator water filter WFCB (manual references Kenmore replacement cartridge 46 9910)
• Door sealing parts such as refrigerator gaskets (symptoms: sweating, frost, warm spots)
• Ice system parts such as the ice container and ice maker components (symptoms: clumping, jams)

Why it matters

Knowing that Kenmore 253 models are typically Frigidaire/Electrolux-built helps you avoid mismatched parts and speeds up repairs, especially for ice maker and water dispenser issues.

Last updated: February 2026

To replace the ice maker in your Kenmore side-by-side refrigerator model 25357388602, we shut off ice production, disconnect power, remove the ice bin, unplug the ice maker harness, then swap the assembly and restore power. Use the diagrams in the 25357388602 installation guide for exact screw locations and connector routing.

Before you start

• Lift the wire signal arm to the up (OFF) position.
• Unplug the refrigerator or switch off the breaker.
• Remove the ice container and set it aside.
• Put towels down; a small amount of water or ice can spill.
• If you will move the refrigerator, close the household water shutoff valve.

Replacement steps (typical side-by-side)

1. Remove the ice bin from the freezer.
2. Take out the screws securing the ice maker to the freezer wall.
3. Slide the ice maker forward slightly and unplug the wiring harness.
4. Transfer any reusable pieces (wire shutoff arm, mounting bracket) if the new unit does not include them.
5. Plug in the harness, position the fill tube correctly, and reinstall mounting screws.
6. Lower the wire signal arm to down (ON), restore power, and reinstall the ice bin.

Water supply connection checks

If you also reconnect the water line, follow the connection method in the 25357388602 owner's manual.

Check	What we do	Why it matters
Water pressure	Confirm 30 to 100 psi	Prevents weak fill or no ice
Shutoff valve	Use a standard shutoff valve (not self-piercing)	Improves reliability and flow
Fittings	Use compression nut and ferrule; tighten plus 1/2 turn	Prevents leaks without cracking fittings

After installation

• Expect the first ice in 12 to 24 hours.
• If the bin will not seat, do not force it; avoid rotating the auger. Realign by turning the auger in 90° increments until it fits.

Why it matters

Correct mounting, a fully seated harness connector, and a leak-free water connection prevent no-ice complaints, slow production, and dispenser jams.

Last updated: February 2026