Owner’s manual
Error Codes
How many cubic feet is my Kenmore Elite refrigerator?
Your Kenmore 10656249400 side-by-side refrigerator’s cubic-foot capacity is the interior storage volume (not the outside cabinet size). The most accurate capacity for your exact model is listed on the model and feature information in the 10656249400 owner's manual.
How to estimate cubic feet (quick method)
If you need a rough estimate, we use this approach:
- Measure interior width, height, and depth of the fresh food section (in inches)
- Multiply:
width × height × depthto get cubic inches - Divide by 1,728 to convert cubic inches to cubic feet
- Repeat for the freezer section and add the two results
- Subtract a little for shelves, bins, and the ice maker housing (they reduce usable space)
Conversion table
| What you have | What to do | Result |
|---|---|---|
| Inches (W × H × D) | Multiply | Cubic inches |
| Cubic inches | Divide by 1,728 | Cubic feet |
Common sizing guidance for side-by-side refrigerators
Most full-size side-by-side refrigerators fall into these ranges:
- 22 to 26 cu. ft.: common for standard-width units
- 26 to 30 cu. ft.: larger-capacity models
- Over 30 cu. ft.: extra-large, typically wider or deeper designs
Why outside measurements do not give the right answer
Using exterior cabinet dimensions (like overall depth and height) overstates capacity because it includes insulation thickness, the sealed refrigeration system space, and door structure. Interior volume is what determines cubic feet.
Related maintenance that affects usable space
If ice production or water filtration components take up space or you are planning replacements, these parts are commonly used on this model:
- Genuine Kenmore refrigerator water filter EDR3RXD1 (water filtration system)
- Refrigerator ice maker WPW10190961 (ice maker and storage bin area)
- Refrigerator door bin WP2156022 (door storage)
For ordering replacement parts for Kenmore model 10656249400, we list compatible parts on this model’s parts page, and you can also search by model number on Sears PartsDirect.
Last updated: February 2026
How to read Kenmore model numbers?
Kenmore model numbers are read left to right; the first three digits are the manufacturer prefix, and the remaining digits identify the specific product design and version. For your Kenmore side-by-side refrigerator model 10656249400, the 106 prefix is the key identifier we use to match the correct parts and the correct 10656249400 owner's manual.
What the Kenmore model number tells you
A Kenmore model number is more than a label; it is the fastest way to get the right refrigerator water filter, ice maker, door gasket, or control board for your exact unit.
- Prefix (first 3 digits): identifies the manufacturer family (example: 106)
- Core digits: identify the base platform and features (dispenser, ice maker style, shelving layout)
- Suffix digits: identify the production variation (color, revision changes, running updates)
- Full model number matters: use all digits, not just the prefix
Where to find the model number on a side-by-side refrigerator
On most Kenmore side-by-side refrigerators, the model/serial tag is typically found in one of these spots:
- Inside the fresh food compartment on a side wall
- On the ceiling of the fresh food compartment near the light
- Along the door frame (hinge side)
- Behind the base grille area (less common)
How we use it to match parts (quick examples)
When you shop parts for 10656249400, we match by the full model number so the part fits and connects correctly.
| What you need | Example part for this model | Why the model number matters |
|---|---|---|
| Water filter | Genuine Kenmore refrigerator water filter EDR3RXD1 | Filter style and cap fit vary by platform |
| Ice maker | Refrigerator ice maker WPW10190961 | Mounting and wiring harness connections differ |
| Water filter cap | Refrigerator water filter cap (black) WP2260518B | Cap design must match the filter housing |
Why it matters
Using only “Kenmore side-by-side” can lead to the wrong filter, bin, or ice maker. Using the full 10656249400 model number keeps your repair accurate and avoids repeat disassembly.
For ordering beyond the parts list for this model, we also use the model number to search our full catalog on Sears PartsDirect.
Last updated: February 2026
How wide is a Kenmore side by side refrigerator?
Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; your Kenmore 10656249400 falls in that common size range. For the exact cabinet width and required clearance for door swing, we recommend confirming the dimensions in the 10656249400 owner's manual.
Typical width and what to plan for
When you are measuring for a replacement or a tight opening, we plan for both the cabinet width and the space needed for ventilation and door swing.
- Typical cabinet width: 32 to 36 inches
- Common “standard” width: about 36 inches
- Counter-depth models: often closer to 32 to 33 inches wide
- Door swing clearance: can require extra side clearance near walls
- Ventilation clearance: leave space at the sides and top for airflow
Clearance guidance (from the manual)
The manual calls out clearances that matter just as much as width, especially if the refrigerator sits next to a fixed wall.
- Allow about 1/2 inch of space on each side and at the top for ventilation
- If installed next to a fixed wall, allow about 2 inches minimum on each side (varies by model) so the doors can swing open
- If the unit has an ice maker, allow extra space at the back for the water line connection
Quick measuring checklist
Use this checklist so the number you write down matches what installers and delivery teams need.
- Measure the opening width at the front and back (walls are not always square)
- Measure the refrigerator cabinet width (not just the doors/handles)
- Add clearance for door swing if a wall is close to the hinge side
- Confirm you have room to remove crisper pans and shelves for service
- Verify the path from the door to the kitchen (hallways, turns, door frames)
Width vs. clearance (simple comparison)
| What you are checking | What it affects | What to include |
|---|---|---|
| Cabinet width | Fit in the cutout | Refrigerator body only |
| Door swing clearance | Ability to fully open doors | Space near side walls |
| Ventilation clearance | Cooling performance | Space at sides and top |
Why it matters
If the refrigerator is too tight in the opening, doors may not open fully, airflow can be restricted (leading to warmer temps), and service tasks like removing bins or pans can become difficult.
If you are shopping for parts while you measure, we stock common fit and maintenance items for this model, including the refrigerator water filter EDR3RXD1. You can also search by model number on Sears PartsDirect.
Last updated: February 2026
Where is the Kenmore Coldspot model number?
On a Kenmore Coldspot side-by-side refrigerator like model 10656249400, the model number is printed on the appliance’s rating label, typically inside the fresh food compartment or freezer compartment. Common spots include the inside wall, inside the door area, or behind the lower crisper drawer; confirm the exact location in the 10656249400 owner's manual.
Most common places to check
Look for a paper or metal tag with the model number and serial number. Check these areas in order:
- Inside the refrigerator compartment on a side wall (often near the top)
- Inside the freezer compartment on a side wall
- On the inside edge of the refrigerator door (hinge side)
- Behind or just above the lower crisper drawers (on the liner wall)
- Behind the base grille or kick plate area (front bottom)
What the label looks like (and what to write down)
The rating label usually includes more than just the model number. We recommend writing down:
- Model number (example: 10656249400)
- Serial number
- Electrical rating (volts/amps)
- Basic refrigerant or system information (varies by unit)
Quick ID checklist
| Item | Why it matters | Example |
|---|---|---|
| Model number | Ensures parts fit your exact refrigerator | 10656249400 |
| Serial number | Helps match production variations | (varies) |
| Brand | Confirms correct parts family | Kenmore |
Why it matters
Kenmore model numbers are the fastest way to match the correct parts and diagrams for your refrigerator. For example, the correct water filter and filter cap depend on the exact model series; for this model you can match parts like the genuine Kenmore refrigerator water filter EDR3RXD1 and refrigerator water filter cap (black) WP2260518B using the model number.
You can also search by model number on Sears PartsDirect if you are building a parts list for a repair.
Last updated: February 2026
