Installation guide
Owner’s manual
Error Codes
How big is the Whirlpool model ED2FHEXNS00?
The Whirlpool ED2FHEXNS00 side-by-side refrigerator measures 35 1/2 in. wide, 69 1/4 in. tall, and 34 1/2 in. deep with handles (about 31 1/8 in. cabinet depth without doors/handles). For clearance and installation notes, use the ED2FHEXNS00 owner's manual.
- Width: 35 1/2 in.
- Height: 69 1/4 in. (to top)
- Depth (cabinet only): about 31 1/8 in.
- Depth (with handles): about 34 1/2 in.
- Plan extra space: for door swing, leveling, and airflow behind the unit
| Measurement | ED2FHEXNS00 size | What to measure to match it |
|---|---|---|
| Width | 35 1/2 in. | Widest point across the front |
| Height | 69 1/4 in. | Floor to highest point |
| Depth (cabinet) | 31 1/8 in. | Back panel to front of cabinet (no doors/handles) |
| Depth (with handles) | 34 1/2 in. | Back panel to front of handles |
- Measure the cabinet opening width, height, and depth.
- Measure doorways and hallways on the delivery path.
- Confirm you have room for door swing (especially on the freezer side).
- Leave space behind the refrigerator for water line and ventilation.
Using the exact ED2FHEXNS00 dimensions helps prevent fit issues in a cutout, avoids blocked doors and drawers, and supports proper airflow for consistent cooling.
Last updated: February 2026
What is the biggest problem in a Whirlpool refrigerator?
The biggest problem we see in Whirlpool refrigerators like model ED2FHEXNS00 is loss of proper cooling, which then triggers secondary complaints such as warm fresh food, soft ice, frost buildup, or water leaking from a clogged defrost drain. Use the ED2FHEXNS00 owner's manual for model-specific operating and care steps.
- Not cooling or weak cooling: food spoils, freezer temperature rises, compressor runs a lot
- Ice maker or dispenser issues: no ice, small cubes, clumping, dispenser not dispensing
- Water leaks: puddles under the unit, water in crisper area, dripping from dispenser
- Frost buildup: freezer wall frosts over, airflow gets blocked, fridge side warms
- Door sealing problems: moisture, condensation, temperature swings, longer run times
- Confirm controls are set correctly and vents are not blocked by food packages.
- Clean condenser coils (dirty coils are a top cause of poor cooling and long run times).
- Check door closure and gasket contact all the way around.
- If you have a water/ice system, replace the filter on schedule and purge air after changes.
- If symptoms persist, check for error indications and follow the diagnostic guidance.
| Symptom | Common cause | Part on this model page |
|---|---|---|
| No water at dispenser or no ice fill | Weak/failed inlet valve | Refrigerator water inlet valve W10408179 |
| Slow water flow, bad taste/odor, small cubes | Restricted water filter | Refrigerator filter EDR5RXD1 |
| No ice production (with good water supply) | Ice maker failure | Ice maker assembly - refrigerator ice maker by Whirlpool 4317943 |
Cooling and airflow problems usually get worse over time; the refrigerator may run longer, temperatures drift, and ice and water performance drops. Addressing basics (airflow, coils, seals, filter) prevents repeat failures and protects food quality.
- Use Whirlpool refrigerator error codes to interpret common fault symptoms.
- Follow how to replace the water filter in a Whirlpool refrigerator for correct filter handling and flushing.
You can order replacement parts for Whirlpool ED2FHEXNS00 from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
Where is the defrost timer on Whirlpool side by side?
On the Whirlpool ED2FHEXNS00 side-by-side refrigerator, defrost is typically controlled by an electronic defrost control rather than a separate, easy-to-spot mechanical defrost timer. We use the wiring diagram and component locations in the ED2FHEXNS00 owner's manual to identify the exact defrost control location for your unit.
Instead of a round timer with an advance dial, you will usually be looking for a control module (often part of the temperature control housing or control box area).
- No dial or “timer advance” slot visible
- A small electronic module or control board connected to multiple wires
- Defrost components located in the freezer evaporator area
- A defrost thermostat (bi-metal) clipped to evaporator tubing
These access points help you find the defrost system parts without assuming a specific timer location.
- Freezer rear panel (inside freezer): evaporator coil area; where the defrost heater and defrost thermostat/bi-metal are found
- Control housing/control box area: where the defrost control electronics are often integrated
- Rear machine compartment: compressor and condenser area; less common for a separate defrost timer on this design
| What you see | What it is | What it changes |
|---|---|---|
| Dial/advance slot on a small box | Mechanical defrost timer | Location is usually a dedicated timer mount |
| No dial; module/board with wiring | Electronic defrost control | Location is usually within a control housing or control box |
Replacing parts based on a “defrost timer” assumption can waste time and money. On ED2FHEXNS00, defrost failures are often tied to the defrost thermostat/bi-metal, wiring, or the electronic control logic.
- Heavy frost on the freezer back wall
- Warm freezer or fresh food section with the fan running
- Water leaking from a clogged/iced defrost drain
If you suspect the defrost thermostat is the issue, a model-matched option is the refrigerator defrost bi-metal WPW10225581.
You can also look up additional parts for ED2FHEXNS00 on the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
