Kenmore Elite 25344483701 refrigerator Parts

On Kenmore Elite refrigerator model 25344483701, the model number is printed on the serial plate located inside the refrigerator compartment (fresh food section). Open the fresh food door and look along the interior walls for the serial plate.

• Open the fresh food (refrigerator) door, not the freezer door.
• Look for a serial plate inside the refrigerator compartment.
• Check common spots: side wall near the front, upper interior wall, or near the control area.
• Use a flashlight; the plate can be easy to miss in low light.
• Write down both the model number and serial number for parts lookup.

The Use and Care Guide for this model recommends cleaning the serial plate with soap and water only so the printing stays readable.

We use the model number to ensure you get the right Kenmore Elite side-by-side refrigerator parts (for example, the correct water filter, ice maker components, or dispenser parts). Even small model variations can use different shelves, sensors, or control boards.

For the exact wording and location guidance, see the 25344483701 owner's manual.

Last updated: January 2026

We size Kenmore Elite model 25344483701 by its storage capacity in cubic feet; most Kenmore Elite side-by-side refrigerators in this class are about 22 to 26 cu. ft. For the exact capacity for your specific unit, check the specifications section in the 25344483701 owner's manual.

Use these quick checks to confirm the official capacity:

• Look in the specifications section of the 25344483701 owner's manual
• Check the model and serial tag inside the fresh food compartment (often on a side wall)
• Compare the listed “total capacity” and “refrigerator/freezer capacity” values
• If you are measuring for fit, also confirm overall width, height, and depth (capacity and exterior size are not the same)

Cubic feet is the total internal storage volume. It does not directly tell you how much usable shelf space you will have because bins, the ice maker, and air channels reduce usable room.

Knowing the correct cubic feet helps you compare replacement refrigerators, plan kitchen fit, and choose compatible accessories like a genuine Kenmore refrigerator water filter WF2CB and refrigerator air filter AFCB that match the filtration system used in this model family.

Last updated: January 2026

A Kenmore Elite refrigerator like model 25344483701 typically lasts 12 to 15 years. Consistent cleaning, good airflow around the cabinet, and staying on top of routine items like filters help the sealed system and compressor run cooler and last longer; see the 25344483701 owner's manual for care and maintenance details.

• Ventilation and condenser cleanliness: dust buildup makes the compressor work harder.
• Stable power: voltage swings can hurt performance and can damage the compressor.
• Door seal condition: air leaks cause longer run times and more frost.
• Filter maintenance: restricted water flow can strain dispenser and ice maker components.
• Usage habits: frequent door openings and warm food loads increase run time.

Your manual lists these Kenmore replacement filter product numbers:

• Water filter product number 9916 (example part: genuine Kenmore refrigerator water filter WF2CB)
• Air filter product number 9917

For step-by-step filter selection and replacement tips, use how to replace the water filter in a Kenmore refrigerator.

Most “early failures” come from heat and long run times. Keeping airflow clear, seals tight, and filters fresh reduces strain on the compressor and sealed refrigeration system, which are the most expensive components to repair.

Last updated: January 2026

Yes. For Kenmore Elite refrigerator model 25344483701, the most reliable “reset” is a power reset: unplug the refrigerator from the wall outlet for a few minutes, then plug it back in. If you’re trying to reset alarms, use the Alarm Reset button instead of unplugging.

• Power reset (controls and cooling restart): unplug, wait about 5 minutes, plug back in.
• Alarm reset (beeps, flashing lights): press and hold the Alarm Reset button for 3 seconds.
• Cooling system turned off: turn the cooling system On using the cooling system On/Off control (location varies by model).

1. Open the doors and locate the power cord.
2. Grip the plug firmly (do not pull on the cord) and unplug from the wall outlet.
3. Wait about 5 minutes.
4. Plug the refrigerator back in and confirm interior lights and fans come on.
5. Allow 8 to 12 hours for temperatures to fully stabilize.

For control locations and alarm behavior, follow the 25344483701 owner's manual.

The Alarm Reset button is for the alarm system only. It can disable or activate audible tones and indicator lights.

A power reset clears minor control glitches and restarts normal operation, but it does not instantly restore safe food temperatures. Using the Alarm Reset button prevents unnecessary unplugging when the issue is only beeping or a flashing “power failure” indicator.

Last updated: January 2026