Kenmore 58715103801 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58715103801, as long as the specific part is still manufactured and available. The most reliable way to match the correct OEM-style part is to shop by the full model number and confirm fit using the diagrams in the 58715103801 owner's manual.

How to find the right part fast

• Use the complete model number 58715103801 (from the serial label on the tub) when searching.
• Match the part by location and description in the exploded-view diagrams.
• Compare the part name and identifier, not just a similar-looking photo.
• If you are fixing a leak, identify whether it is door-area, sump-area, or drain-area first.
• For installation-related parts (hoses, wiring, mounting), follow the 58715103801 installation guide to avoid connection issues.

Common Kenmore dishwasher parts that are often still available

These are examples of parts we commonly see replaced on this model family:

Repair symptom	Part type to check	Example for 58715103801
Water leaking at the door	Door seal or splash shield	Gasket 809006501 or gasket 154701001
Dishes not drying well	Heating circuit	Heater 154825001
Not draining or slow drain	Drain path	Hose 807117001
Not filling or fills slowly	Water supply control	Dishwasher water inlet valve 154637401

Why it matters

Kenmore dishwashers are built to be serviceable, and many repairs are straightforward when you match parts to the exact model. Using the correct 58715103801 part helps prevent leaks, poor wash performance, and repeat repairs caused by near-matches.

Last updated: February 2026

For a Kenmore dishwasher model 58715103801, repairing is worth it when the problem is a wear item (leak, drain issue, rack rollers) or a single failed component; it is less worth it when multiple major parts (motor, control) are failing or the tub is damaged. Use the 58715103801 owner's manual to match symptoms to likely causes before buying parts.

Quick decision checklist

• Repair when the issue is isolated (one symptom, one likely part).
• Repair when the dishwasher still fills, washes, and drains but has a leak or poor cleaning.
• Repair when the fix is mechanical and accessible (seal, hose, inlet valve, rollers).
• Replace when you have repeated leaks, repeated electrical failures, or multiple error symptoms.
• Replace when the repair requires several high-cost parts at once (for example, motor plus control).

Common repairs that are usually cost-effective

These are frequent fixes on this style of Kenmore dishwasher and typically restore normal operation:

• Door leaks: replace the lower door seal gasket 809006501
• Not draining or slow draining: inspect/replace hose 807117001 or the drain pump
• Not filling or fills slowly: replace dishwasher water inlet valve 154637401
• Poor drying or water not heating: test/replace heater 154825001
• Rack problems: replace dishwasher dishrack roller, lower 5304532229

Cost and complexity comparison

Repair type	Typical difficulty	Typical impact
Seal or gasket leak	Low	Stops leaks, protects flooring
Drain hose or inlet valve	Low to medium	Restores drain/fill performance
Heating element	Medium	Improves drying and cleaning
Control board or motor	Medium to high	Can restore operation, but higher cost

Why it matters

A targeted repair keeps your 58715103801 running reliably and avoids water damage. The manual also notes performance basics such as using proper cycles and ensuring adequate water conditions (for example, incoming water around 120°F and home water pressure in a normal range), which can prevent “false” repair decisions caused by loading or supply issues.

Last updated: February 2026

On Kenmore dishwasher model 58715103801, we find the model number on the model and serial label inside the tub; it’s typically on the right side of the tub when you open the door. Use that full model number to match the correct parts and instructions.

Where to look (fast checklist)

• Open the dishwasher door fully.
• Look along the inside tub wall, not the outer door.
• Check the right side of the tub first (common location for this model family).
• Use a flashlight; the label can be low-contrast.
• Wipe the area with a damp cloth if soap film is hiding the print.

What the label includes

The rating label usually lists:

• Model number (for example, 587.1510xxx format in the manual)
• Serial number
• Electrical ratings and other identification info

If you’re comparing what you see on the label to your parts page, use the full model number exactly as printed (including any dots or extra digits).

Why it matters

The model number is how we match the correct Kenmore dishwasher parts (like a door seal, drain hose, or water inlet valve) and the right procedures in the 58715103801 owner’s manual. Small differences in model numbers can change fit, wiring, and installation steps.

Quick reference table

What you need	Where to find it	What to do with it
Model number	Model/serial label inside tub (often right side)	Use it to select exact parts for 58715103801
Serial number	Same label	Helpful for service history and production details

Last updated: February 2026

On Kenmore dishwashers, an F4-E1 code is commonly tied to a wash motor or wash pump problem (the dishwasher is not circulating water correctly). On model 58715103801, start by resetting power, then check for a blocked spray arm or filter area before moving to motor-level repairs; see the 58715103801 owner's manual.

What you should check first (fast, no parts)

• Turn the dishwasher off at the breaker for 1 minute, then restore power and try a cycle.
• Confirm the door fully latches and the cycle actually starts.
• Open the door mid-cycle and verify you hear strong water spray action.
• Inspect the lower spray arm for clogs and make sure it spins freely.
• Clean the sump and filter area (food debris can prevent proper circulation).

Likely causes and what they mean

What you notice	Most likely issue	What to do next
Dishwasher fills but sounds quiet, poor cleaning	Wash motor not circulating	Check for obstructions; then test motor circuit per manual
Water remains cold, poor drying	Heater circuit issue	Inspect heater and wiring; verify heating during cycle
Unit overfills or stops filling unexpectedly	Float/overfill protection issue	Check float movement; test the float switch

Parts that are often involved

If your troubleshooting points to a failed component, these are common suspects for circulation, heating, and fill protection on this model:

• Heater 154825001 (heating element)
• Switch 154773201 (float switch)
• Dishwasher water inlet valve 154637401 (fill valve)

Why it matters

When the dishwasher cannot circulate water at the right pressure, you will see poor cleaning, detergent not dissolving fully, and repeated error codes. Catching a clog early can prevent unnecessary motor or control repairs.

Last updated: February 2026

Kenmore dishwasher model 58715103801 is a standard built-in dishwasher size; most installations use a 24-inch-wide cabinet opening with an adjustable height range, and the installation guide notes it fits an opening height of at least 33-3/4 inches.

Typical dimensions you should plan around

Most Kenmore built-in dishwashers in this class fit these common cutout targets:

• Width (opening): 24 inches
• Height (opening): 33-3/4 inches minimum (adjustable with levelers)
• Depth: typically about 24 inches to the cabinet face (door and handle can extend past)

For the exact cutout and leveling details for your unit, use the 58715103801 installation guide.

How to confirm your exact fit in 5 minutes

We recommend measuring the cabinet opening and comparing it to the install requirements:

• Measure opening height from the underside of the countertop to the finished floor
• Measure opening width between cabinet sides (front and back)
• Measure depth from the back wall to the cabinet face frame
• Check for a level floor; adjust the front and rear levelers as needed
• Confirm the drain hose and wiring route will not interfere with the tub or frame

Quick reference: opening vs. dishwasher

What you measure	What to look for	Why it matters
Opening height	33-3/4 in. minimum	Ensures the dishwasher slides in without countertop or floor changes
Opening width	Typically 24 in.	Prevents binding and door alignment issues
Opening depth	Typically 24 in.	Avoids kinks in the drain hose and water line

Why it matters

Correct sizing prevents installation problems like a door that rubs the cabinet, a tub that sits out of level (poor draining), and leaks at the door seal. If you are also chasing leaks after installation, a worn lower door seal such as the gasket 809006501 is a common fix when the seal is torn or flattened.

Last updated: February 2026

In a Kenmore dishwasher model 58715103801, the most commonly replaced parts are the ones that handle sealing, heating, filling, draining, and door operation. When you see leaks, poor drying, no fill, or no drain, these wear items and water-handling components are the first places we check; see the 58715103801 owner's manual for care and cleaning details.

Commonly replaced parts (and what they fix)

• Door seals and gaskets: help stop leaks at the door and tub opening; a worn seal can cause water on the floor (example: gasket 809006501).
• Heating system parts: improve drying and water temperature; a failed heater can leave dishes wet (example: heater 154825001).
• Water inlet valve: controls filling; a bad valve can cause no fill or slow fill (example: dishwasher water inlet valve 154637401).
• Drain components: help pump water out; clogs or a weak pump can leave water in the tub (example: hose 807117001).
• Door latch and hinges: keep the door closed and aligned; problems can prevent starting or cause leaks (example: latch assembly A00099902).
• Racks and rollers: break, bind, or rust over time; this affects loading and rack movement (example: dishwasher dishrack roller, lower 5304532229).

Quick symptom-to-part guide

Symptom	Most likely parts to check	What we do first
Water leaking at the front	Door seal, splash shield, level condition	Confirm the dishwasher is level; inspect gasket contact points
Dishes not drying well	Heater, rinse aid use, loading	Verify heater operation; avoid blocking spray arms
Won’t fill or fills slowly	Water inlet valve, supply line, float/overfill protector	Confirm supply is on; check float moves freely
Won’t drain or water left in tub	Drain hose, drain pump, air gap (if installed)	Check for kinks/clogs; clean air gap cover

Why it matters

Replacing the right part early prevents repeat leaks, poor wash performance, and strain on the pump and motor. The manual also notes key performance basics like 120°F incoming water temperature and 20 to 120 psi water pressure, which can mimic a “bad part” when they are out of range.

Maintenance that reduces repeat failures

• Keep the tub gasket area wiped clean
• Make sure spray arms can rotate freely (no blocked loads)
• Clean the drain air gap (if your installation uses one)
• Use fresh automatic dishwasher detergent and measure correctly
• Keep the overfill protector moving freely

Last updated: February 2026

To hard reset your Kenmore dishwasher model 58715103801, cancel the current cycle by pressing START/CANCEL; the dishwasher runs a drain for about 90 seconds and returns to an idle state so you can select a new cycle. For model-specific control steps, use the 58715103801 owner's manual.

Hard reset methods that work on 58715103801

• Cancel and drain: Press START/CANCEL once; wait for the drain to finish, then choose a cycle.
• Clear Delay Start: If a delay is set, press START/CANCEL to cancel the delay and return to normal starting.
• Breaker power reset: Turn power off at the circuit breaker for 1 minute, then restore power and start a cycle.
• Door latch reset: Open the door, wait 10 seconds, close and latch firmly, then press START/CANCEL.

What each reset actually does

Most “hard resets” on this dishwasher are either a controlled stop-and-drain or a power reboot of the electronic control.

Reset option	What it clears	Best for
START/CANCEL	Active cycle state	Wrong cycle, stuck mid-cycle
Cancel Delay Start	Delay timer	Dishwasher will not start when expected
Breaker reset	Control logic after glitch/outage	Frozen keypad, odd behavior

If it still will not start after resetting

• Confirm the door is fully latched; a weak latch can prevent the cycle from starting.
• Make sure the overfill protector (float) moves freely; a stuck float can stop filling.
• Verify the water supply valve is fully open and incoming water is hot (best cleaning starts around 120°F).
• If an error code is showing, match it to the correct Kenmore platform using Kenmore he dishwasher error codes.

Why it matters

Using START/CANCEL to stop and drain protects the pump from running dry and clears many “won’t start” or “stuck cycle” situations without replacing parts.

Last updated: February 2026