Installation guide
Owner’s manual
Error Codes
Can you still get parts for a Kenmore dishwasher?
Yes. We still carry replacement parts for many Kenmore dishwashers, including model 66517363301, as long as the part is still manufactured and available. The key is matching the exact model number so you get the correct fit for items like the heater, door seal, drain hose, or inlet valve.
Use the model-specific diagrams and part lists in the 66517363301 owner's manual to confirm the part location and name before ordering.
- Match the full model number: 66517363301 (not just “665”)
- Compare the part name and part ID, not only the description
- Check symptoms first (leak, no heat, not draining) so you replace the right component
- Inspect for simple issues (clogs, loose connections, damaged seals) before buying parts
- If multiple versions exist, verify by the diagram callout and your dishwasher’s configuration
These are frequently replaced items for this model when symptoms point to them:
- Heating problems: dishwasher heater W10518394
- Leaks at the door: dishwasher door seal W10542314
- Not draining or slow drain: dishwasher drain hose 8269144A
- No fill or weak fill: dishwasher water inlet valve WP8531669
- No power or intermittent power: fuse 8193762
| Symptom | Most likely area | Example part for 66517363301 |
|---|---|---|
| Dishes not drying, water stays cool | Heating circuit | Heater, thermostat |
| Water on floor at front | Door sealing | Door seal |
| Standing water in tub | Drain path | Drain hose |
| Dishwasher won’t fill | Water supply | Inlet valve |
Kenmore dishwashers are designed for years of dependable operation, but normal wear items (seals, hoses, heaters) eventually fail. Using the correct model-matched part helps prevent repeat leaks, poor cleaning, and unnecessary returns.
Last updated: February 2026
How do I tell what model Kenmore dishwasher I have?
Your Kenmore dishwasher’s model number is printed on the model and serial number label inside the door area. On model 66517363301, that label is typically on the inner door frame or along the tub opening; match the full number exactly before ordering parts or troubleshooting.
- Open the dishwasher door and look along the inner door frame.
- Check the top edge of the door (near the latch area).
- Look on the tub wall near the front opening.
- Wipe the area with a damp cloth; soap film can hide the print.
- Write down both the model and serial numbers for service and parts matching.
Most Kenmore undercounter dishwashers use a sticker or metal plate that lists:
- Model number (example: 66517363301)
- Serial number
- Electrical ratings (volts/amps)
The parts and features section in the 66517363301 owner's manual calls out the model and serial number label as a built-in feature, which is why checking the door opening area is the best starting point.
Use these next-best locations:
- Behind the toe panel at the bottom front (some installations make the label easier to see from below)
- On the side of the tub near the front legs
- In your paperwork: the 66517363301 installation guide often gets stored with purchase or install documents
Kenmore model numbers control the exact fit for key items like the heating circuit, door sealing, and water fill components. Even small model differences can change which dishwasher heater, door seal, or water inlet valve fits correctly.
| What you’re doing | What to use | Why |
|---|---|---|
| Ordering replacement parts | Exact model number | Ensures correct fit and wiring/connector match |
| Troubleshooting symptoms | Model + serial | Helps narrow down configuration differences |
| Scheduling service | Model + serial | Speeds up diagnosis and parts lookup |
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore dishwasher like model 66517363301 is worth it when the fix is a normal wear item (seal, hose, valve, heater) and the total repair cost stays well below the price of a comparable replacement. It is also worth repairing when the issue is covered by the warranty terms listed in the 66517363301 owner's manual.
We use these practical checkpoints:
- Repair when the problem is a leak, no-heat, or no-fill caused by a single part (seal, hose, inlet valve, heater).
- Repair when the tub and inner door panel are in good shape and the dishwasher cleans well once fixed.
- Repair when you can DIY safely (basic hand tools, careful shutoff of power and water).
- Replace when multiple major systems are failing (wash motor plus leaks plus electrical issues).
- Replace when the repair estimate approaches the cost of a new unit.
| Symptom | Likely area | Example part for this model |
|---|---|---|
| Water on floor at the door | Door sealing | Dishwasher door seal W10542314 |
| Not draining or slow drain | Drain path | Dishwasher drain hose 8269144A |
| Not filling or fills slowly | Water supply | Dishwasher water inlet valve WP8531669 |
| Dishes not drying, water stays cool | Heating circuit | Dishwasher heater W10518394 |
For model 66517363301, the manual describes warranty coverage that can make repair the clear choice, including:
- One-year full warranty on the dishwasher when installed and operated as instructed.
- Two-year coverage on the electronic control and power supply board.
- Limited two-year coverage on parts of the wash system (motor, pump, spray arms, feed tube, seals, gaskets).
Check the exact terms and dates in the 66517363301 owner's manual and keep your proof of purchase handy.
A targeted repair (like replacing a door seal, drain hose, or inlet valve) often restores cleaning and leak protection for a fraction of replacement cost, and it avoids the extra work of uninstalling and fitting a new undercounter dishwasher.
Last updated: February 2026
