Craftsman 917251510 tractor Parts

Yes, many Craftsman mowers use Briggs and Stratton engines; however, the Craftsman lawn tractor model 917251510 is equipped with a Kohler engine (not a Briggs and Stratton). For parts and service, always match to the engine model and spec on the engine ID tag.

Even though Craftsman uses multiple engine suppliers across its mower lineup, your 917251510 is a riding lawn tractor platform that uses a Kohler engine. When you shop for tune-up and repair parts, the engine identification is what ensures the correct fit.

• Find the engine ID label on the blower housing, valve cover, or engine block
• Record the engine model and spec numbers (Kohler uses model and spec)
• Use that engine ID to match maintenance parts (oil filter, air filter, spark plug)
• Use the tractor model 917251510 to match chassis parts (belts, switches, deck hardware)

Craftsman has used different engine manufacturers depending on mower type and production year.

Engine parts are engine-specific. For example, an oil filter that fits one Kohler series may not fit a Briggs and Stratton engine, even if both are used on Craftsman mowers.

These are examples of parts you might replace on a 917251510 during maintenance or troubleshooting:

• Oil filter 12-050-01-s1 (routine oil changes on many Kohler engines)
• Switch 582107601 (PTO switch issues such as blades not engaging)
• Riding lawn mower blade drive belt 532148763 (deck belt wear, slipping, or breakage)

• How to tune up a riding lawn mower video
• Riding lawn mower engine spins but wont start video

Last updated: February 2026

The most common problems we see on Craftsman riding mowers like model 917251510 are no-start or hard-start issues, poor cutting performance, and drive or PTO engagement problems. Most of these trace back to stale fuel, a weak battery/starting circuit, worn belts, or safety interlock switch faults.

• Engine won’t crank (no click or just clicks): weak battery, bad connections, starter/solenoid issues
• Engine cranks but won’t start: old fuel, clogged carburetor jets, dirty air filter, fouled spark plug
• Starts then dies when you release the brake: brake/clutch safety switch or wiring issue
• Blades won’t engage or cut is uneven: PTO switch, belt wear, deck setup problems
• Vibration after hitting something: bent blade, damaged spindle, sheared flywheel key (engine timing off)

1. Fuel: drain old gas and refill with fresh fuel (stale fuel is the #1 cause of seasonal no-starts).
2. Battery and cables: clean and tighten terminals; check for corrosion and loose grounds.
3. Air intake: clean the air filter and make sure the choke plate moves freely.
4. Spark: inspect/replace the spark plug; confirm you have strong spark.
5. Safety interlocks: verify brake is fully depressed and PTO is OFF; inspect switch connectors.

If your blades will not engage, the switch 582107601 is a common electrical culprit. If the deck belt is worn or glazed, the riding lawn mower blade drive belt 532148763 is the typical wear item to inspect next.

• For a clicking no-crank condition: riding lawn mower engine clicks but doesnt turn over video
• For cranks but won’t start: riding lawn mower engine spins but wont start video
• For dies when brake is released: riding lawn mower engine dies when you release the brake video

Catching fuel, belt, and safety-switch problems early prevents no-start situations at the beginning of mowing season and helps protect the PTO clutch, deck spindles, and engine from unnecessary strain.

Last updated: February 2026

For a Craftsman riding mower like model 917251510, the year is not reliably determined from the model number alone; you typically identify the build date by finding the product label and decoding the serial number or date code printed on it.

On most Craftsman front-engine lawn tractors, the product label is commonly located in one of these spots:

• Under the seat pan (lift the seat and look on the frame)
• On the rear fender pan near the seat
• On the frame rail near the engine
• Under the hood near the dash tower

Write the serial number exactly as shown, including any letters.

Craftsman tractors were built by different manufacturers over the years, so the serial format varies. A common format you will see is a 6-digit date code embedded in the serial number:

• First 2 digits: month
• Next 2 digits: day
• Last 2 digits: year

If your label shows a different pattern (more digits, letters, or multiple codes), use the date-style group that matches MMDDYY or YYMMDD and compare it to the mower’s features (engine family, deck style, wiring harness style).

Knowing the correct year helps us match the right parts and diagrams for your 917251510, especially for wear items like belts, switches, and fuel system parts.

When you are confirming the year, also confirm these common part-fit areas:

• Deck drive and blade drive belt routing
• PTO engagement style (manual lever vs. electric PTO switch)
• Fuel tank and fuel line routing
• Front axle and steering hardware
• Electrical connectors on safety switches

If your mower uses an electric PTO switch, the switch 582107601 is one of the parts that must match the correct version.

If you are troubleshooting starting or electrical issues while you are checking the label, use riding lawn mower engine wont turn over or click video for a quick, step-by-step diagnostic flow.

Last updated: February 2026

Today, Craftsman lawn tractors are built by different manufacturers depending on the specific model and retailer, with Stanley Black & Decker owning the Craftsman brand. For Craftsman model 917251510, the 917-prefix is commonly associated with tractors produced for Sears by AYP (American Yard Products), a Husqvarna Group company.

Even when the Craftsman name stays the same, the underlying manufacturer can change; that is why we always match parts by model number and part ID, not by brand name alone.

• Use the full model number 917251510 when searching parts diagrams.
• Match the exact part ID and description before ordering.
• Compare your old part to the listing (mounting holes, connector style, belt length).
• If your tractor has an engine model tag (Kohler, Briggs & Stratton), use it for engine-only parts.
• When in doubt, replace wear items as sets (for example, belts and pulleys) to prevent repeat failures.

These are common items we see customers replace on Craftsman 917251510 tractors:

Craftsman is a brand, not a single factory. Knowing who built your tractor helps you identify the correct parts family, but the most accurate way to get the right replacement is always the exact model number (917251510) and the exact part ID.

If you are troubleshooting a no-start or crank issue, follow the steps in riding lawn mower engine spins but wont start video to narrow it down to fuel, spark, or safety interlocks.

Last updated: February 2026