Kenmore 25360503410 refrigerator Parts

Kenmore model 25360503410 is a top-mount refrigerator, not an upright freezer. Its exact cubic-foot capacity is listed on the model’s rating information and in the 25360503410 owner's manual; most top-mount refrigerators in this style are commonly in the mid-to-high teens (cu. ft.).

The “253” prefix is used across multiple Kenmore refrigeration products, so it’s easy to mix up model types.

• 25360503410: top-mount refrigerator (fresh food on top, freezer on top)
• Upright freezer models: typically listed as “upright freezer” and have different model numbers
• Capacity is not interchangeable between different 253-series products

We recommend checking these spots first because they match your exact unit.

• The model/serial plate inside the refrigerator compartment
• The specifications section in the 25360503410 owner's manual
• The installation clearance/spec page in the 25360503410 installation guide

Cubic-foot capacity affects food storage planning, energy use expectations, and whether shelves, bins, and drawers fit your needs. It also helps when comparing replacement parts like a crisper drawer - refrigerator storage component by frigidaire 240337103 to what’s currently installed.

Last updated: January 2026

Most Kenmore refrigerators last 12 to 15 years. For a Kenmore top-mount like model 25360503410, regular maintenance (especially keeping airflow and door sealing in good shape) is what most often determines whether you hit the average or exceed it; see the 25360503410 use and care guide for model-specific care steps.

A refrigerator’s life is mainly driven by compressor run time, heat removal, and how hard the sealed system has to work.

• Dirty condenser area makes the compressor work longer and hotter
• Worn or leaking door gaskets let warm air and moisture in
• Overpacking blocks air circulation and creates warm spots
• Frequent door openings increase run time and frost load
• Power surges and low voltage can stress the control board and compressor

These habits reduce strain on key parts like the compressor, evaporator fan motor, and temperature sensor.

• Keep the condenser area clean and unobstructed
• Confirm doors close fully and don’t pop open
• Set stable temperatures (avoid frequent knob changes)
• Keep vents clear in both fresh food and freezer sections
• Replace failed interior lighting promptly for safe visibility (follow the bulb steps in the manual)

A Kenmore refrigerator that runs efficiently keeps food safer, reduces temperature swings, and avoids premature wear on high-cost components like the compressor and electronic control board.

Last updated: January 2026

Kenmore model 25360503410 is a Kenmore-branded top-mount refrigerator built for Sears; the 253 model prefix identifies the manufacturing source used for this series. For model identification details and where to find the data plate, use the 25360503410 owner’s manual.

Kenmore is a brand name, and the actual manufacturer is commonly identified by the model prefix.

• The model prefix is the first three digits of the model number (here, 253).
• That prefix is used to match the unit to the manufacturing source for that series.
• The serial plate inside the fresh food compartment lists the model and serial number.
• The Use and Care Guide covers where to locate and record that information.

The serial plate is located inside the refrigerator compartment. This is the best place to confirm you are ordering parts for the correct unit.

Kenmore refrigerators can share similar styling across different manufacturers, but parts like door gaskets, controls, and shelves can vary by build.

• Ensures the correct fit for shelves, bins, and drawers
• Helps match electrical parts like a control board or temperature sensor
• Reduces returns caused by look-alike parts

Last updated: January 2026