Whirlpool WFG510S0AW2 gas range Parts

Whirlpool gas ranges, including model WFG510S0AW2, are a strong choice when you want dependable everyday cooking, straightforward controls, and widely available replacement parts. Overall performance is typically very good; most complaints we see are about setup details (power, grounding) or normal wear items rather than the core range design.

A good gas range consistently lights burners, holds stable oven temperatures, and operates safely on a properly grounded 120V circuit. Whirlpool ranges are built around common, serviceable components, which helps keep long-term ownership practical.

• Reliable electronic ignition when the outlet is correctly grounded
• Good value for basic baking and stovetop cooking
• Parts availability for typical repairs (ignition, sensors, door hardware)
• Straightforward troubleshooting steps in the documentation

• Oven temperature can drift over time if a sensor weakens
• Ignition issues if power polarity or grounding is incorrect
• Wear on door hinges or knobs with heavy daily use

If a Whirlpool gas range seems “not good,” the cause is often installation or a single replaceable part.

• Verify the range is plugged into a grounded 3-prong outlet (controls may not work without proper chassis grounding)
• Confirm the house fuse or breaker is not tripped
• Make sure the gas shutoff valve is open
• Avoid using a GFCI outlet for spark-ignition ranges if nuisance tripping occurs
• If the oven is inaccurate, test and calibrate per the WFG510S0AW2 owner’s manual

A gas range can only perform as designed when it has correct electrical grounding and a steady gas supply. When those basics are right, Whirlpool ranges usually deliver consistent burner ignition and predictable baking results for everyday meals.

Last updated: February 2026

On your Whirlpool WFG510S0AW2 gas range, the model number is on the model/serial rating plate on the oven frame behind the top left side of the oven door. Open the oven door and look along the front frame area for the plate; it lists the model and serial information.

Check these common spots in this order:

• Oven frame behind the top left side of the oven door (primary location for this model)
• Along the front frame just inside the oven opening
• On a metal rating plate (not a paper sticker) riveted or adhered to the frame
• If you have a drawer below, do not rely on the drawer area first for this model

For diagrams and labeling examples, use the WFG510S0AW2 installation guide.

1. Turn on the oven light so you can see the frame clearly.
2. Open the oven door fully.
3. Look at the upper left area of the oven frame (the front frame around the oven cavity).
4. Write down the model number and serial number exactly as shown.

The model/serial rating plate is the most reliable way to match Whirlpool range parts and service information to your exact build. It is also referenced for gas-related details (such as the gas type the range is set up for), which matters when ordering parts or following installation and conversion instructions.

• Match the full model number (including all letters and numbers).
• Use the model number to confirm compatibility before buying electrical or gas components.
• If you are troubleshooting oven temperature issues, the model number helps confirm the correct sensor, such as the range oven temperature sensor WPW10181986.

Last updated: February 2026

If your Whirlpool WFG510S0AW2 cooktop burners light but the oven will not, the most common causes are a weak oven igniter, a gas supply issue to the oven burner, or a control or sensor problem. We recommend checking ignition behavior first, then testing key parts.

• Confirm the range is plugged in and the breaker is on; the oven uses electronic ignition.
• Make sure the gas shutoff valve is fully open.
• Start BAKE and watch for ignition: you should hear sparking and the burner should light shortly after.
• Try BROIL; the broil burner should light within about 8 seconds (some conditions can take longer).
• If you smell gas but no flame, stop and ventilate; do not keep retrying.

• Oven igniter: A weak igniter can prevent the oven burner from opening fully and lighting. Consider replacing the range oven igniter WP8054129.
• Oven temperature sensor: If the oven heats erratically or won’t regulate temperature, test/replace the range oven temperature sensor WPW10181986.
• Electronic control: If the display works but BAKE/BROIL will not energize ignition, the control can be involved (diagnosis recommended before replacing).

On gas ranges like the Whirlpool WFG510S0AW2, the cooktop and oven are separate burner systems. The cooktop can light normally while the oven fails if the oven igniter is weak, the oven burner flame setup is off, or the oven control circuit is not sending power to ignition.

Use the WFG510S0AW2 installation guide for ignition system notes and burner flame checks, including what a proper bake flame should look like.

Last updated: February 2026