Kenmore Elite 79075343311 gas range Parts

No. The Kenmore Elite gas range model 79075343311 does not use a single external “reset” button; instead, we reset the control by restoring factory defaults from the keypad or by power cycling the range to reboot the electronic oven control.

The reset options that work on model 79075343311

1) Restore factory default settings (control reset)

This is the closest thing to a true reset for the oven control.

• Press and hold the 7 key for about 6 seconds (until you hear the acceptance tone)
• Press START to complete the reset
• Expect your preferences to return to defaults (clock format, tones, temperature display, offsets, stored recipes)

For the exact key sequence and what gets cleared, follow the steps in the 79075343311 owner's manual.

2) Power cycle (reboot)

Use this when the display is frozen, keys are unresponsive, or you want a quick reboot.

• Turn OFF the range breaker (or unplug the cord if accessible)
• Wait 2 to 5 minutes
• Restore power and reset the clock

What a “reset” will and won’t fix

A reset helps with control logic issues; it does not repair failed ignition or heating parts.

Symptom	Reset likely helps?	More likely cause
Display locked up or beeping oddly	Yes	Control needs reboot/default restore
Oven not heating, no glow from igniter	No	Failed igniter or gas/ignition issue
Oven temperature seems off	Sometimes	Sensor issue or calibration needed
Surface burners click but won’t light	Sometimes	Spark/ignition component issue

Why it matters

On the Kenmore Elite 79075343311, “resetting” is mainly about the electronic oven control settings. If the problem is heat or ignition related, troubleshooting usually shifts to components like the igniter, temperature sensor, or spark system.

Parts we commonly check when reset doesn’t solve it

• Tappan range oven burner igniter 316489403 (no bake ignition or weak ignition)
• Frigidaire range oven temperature sensor 316490000 (temperature errors, uneven baking)
• Range spark module 5304508269 (surface burner clicking/ignition problems)
• Wiring connections at the control and igniters (loose, burned, or damaged)

Last updated: February 2026

A Kenmore gas range like model 79075343311 typically lasts 15 years with normal household use. Keeping burners clean, using proper flame size, and addressing ignition or temperature issues early helps you get the full life out of the oven and cooktop.

Typical lifespan and what affects it

Most ranges reach their expected lifespan when heat, gas flow, and airflow stay consistent.

• Daily heavy cooking shortens lifespan; occasional use extends it
• Grease buildup around burners and under the cooktop increases wear
• Power surges and repeated self-clean cycles can stress electronic controls
• Poor flame adjustment (flame extending past the pan) overheats parts
• Delayed repairs (weak igniter, inaccurate sensor) can strain other components

Parts that commonly drive “end of life” symptoms

When a range feels “worn out,” it is often a few serviceable parts.

Symptom	Common cause	Example part for this model
Oven won’t heat or takes too long to ignite	Weak oven igniter	Tappan range oven burner igniter 316489403
Oven temperature swings, bakes unevenly	Failing temperature sensor	Frigidaire range oven temperature sensor 316490000
Burners click but won’t light reliably	Igniter switch or harness issue	Frigidaire range igniter switch and harness assembly 316580615

Maintenance that helps you reach 15 years

We recommend these habits for the Kenmore Elite 79075343311.

• Wipe spills after the cooktop cools; keep burner ports clear
• Use pans that match burner size; keep flame under the pan edge
• Replace a slow-to-glow igniter before it causes no-heat problems
• Avoid running self-clean back-to-back; let the range cool fully between cycles
• Follow cleaning and care steps in the 79075343311 use and care guide

Why it matters

A gas range can feel “done” when ignition gets weak or temperatures drift, but replacing a few key parts often restores safe, consistent cooking and prevents secondary damage to controls and wiring.

Last updated: February 2026

On the Kenmore Elite gas range model 79075343311, the model and serial number are printed on an identification label attached to the lower right oven frame. You can see it by opening the storage drawer or warming drawer; the label is on the frame behind the drawer opening (see the 79075343311 owner's manual).

Quick steps to locate the label

• Turn the oven light on so you can see into the lower area more clearly.
• Pull the storage drawer or warming drawer fully open.
• Look at the lower right side of the oven frame (not on the drawer itself).
• Find the sticker or metal plate with Model and Serial fields.
• Write the full model number exactly as shown (for this unit, it should read 790.7533 followed by additional digits).

Common alternate locations (if the label is hard to spot)

On this Kenmore Elite range, the primary location is the lower right oven frame. If the label is missing or unreadable, these are the next most common places to check on similar gas ranges:

Location	What to look for	When it helps
Oven door frame area	Sticker on the frame behind the door	If the drawer area has been cleaned or repainted
Back panel	Rating plate near the lower rear	If the drawer is not present on your configuration
Paperwork	Use & care guide cover page	If the appliance label is damaged

Why it matters

We use the exact model number and serial number to match the correct Kenmore parts (like an oven igniter, temperature sensor, or spark module) and to ensure diagrams and installation details line up with your specific configuration.

Last updated: February 2026

Kenmore is a brand name sold by Sears, and the Kenmore Elite gas range model 79075343311 is part of the 790-series that is widely associated with Frigidaire/Electrolux-built ranges. For model-specific identification details and supported service information, use the 79075343311 use & care guide.

How to confirm who built your exact range

We use the model number format and the appliance data plate to confirm the original manufacturer behind a Kenmore model.

• Check the full model tag for a prefix like 790.7533 (often printed with a dot on the label).
• Match the prefix to the series family shown in documentation.
• Use the serial tag location shown in the manual to find the label on the range.
• When ordering parts, always match by model number 79075343311 (not just “Kenmore Elite”).
• If you are comparing parts, cross-check the part description and where it installs (oven, surface burner, control panel).

What “Kenmore” means (brand vs. manufacturer)

Kenmore appliances are branded and sold under the Kenmore name, but they are manufactured by partner companies. The builder can vary by product type and model series.

What you have	What it tells you	Why it matters
Kenmore nameplate	Retail brand	Doesn’t identify the factory by itself
790-series model format	Manufacturer family identifier	Helps match correct parts and service info
Parts cross-match by model	Fit and compatibility	Prevents wrong igniters, sensors, or controls

Why it matters for parts and troubleshooting

Knowing the manufacturer family helps you choose the right replacement parts and follow the correct diagnostic steps for ignition, temperature accuracy, and control issues.

If you are troubleshooting common oven heat or ignition problems on this model, these parts are frequently involved:

• Tappan range oven burner igniter 316489403 (bake ignition)
• Frigidaire range oven temperature sensor 316490000 (temperature regulation)
• Range spark module 5304508269 (surface burner spark/ignition system)

Last updated: February 2026