How many cubic feet is Kenmore freezer Model 25328262804?
Kenmore upright freezer model 25328262804 is a 17.0 cubic foot freezer. Use this capacity when planning food storage, choosing baskets/shelves, and estimating energy use; it is the standard size reference for this specific Kenmore model.
Quick ways to verify you are matching the right model
Use these checks so you do not confuse 25328262804 with a similar 253.xxxxxxxx Kenmore freezer:
- Confirm the full model number on the rating label inside the cabinet (upright models are commonly on an interior wall).
- Match all digits exactly: 25328262804.
- Use the capacity for storage planning and organization zones (meats, vegetables, ready-to-eat).
- For feature details and operating instructions, use the 25328262804 owner's manual.
Capacity guide: what 17.0 cu. ft. means in practice
A 17.0 cu. ft. upright freezer is a mid-to-large household size that supports bulk shopping while still fitting typical garage or utility-room footprints.
| Capacity | Category | Typical fit/use |
|---|---|---|
| 12 to 14 cu. ft. | Small | Overflow storage, apartments |
| 17.0 cu. ft. | Mid-to-large | Bulk groceries with organized shelving |
| 19 to 21+ cu. ft. | Extra-large | Large families, long-term storage |
Why it matters
Capacity affects how well cold air circulates. When an upright freezer is packed too tightly, airflow can be restricted, which leads to warm spots, longer run times, and more frost.
Helpful organization tip
For faster access and less door-open time, use tips for finding food in the freezer faster to set up zones and label bins.
Last updated: January 2026
Is there a reset button on a Kenmore upright freezer?
Kenmore upright freezer model 25328262804 does not use a single dedicated “reset” button for normal operation. Instead, resetting is typically done by restoring power (unplugging briefly and plugging back in) and then re-setting the electronic temperature control inside the cabinet as described in the 25328262804 owner's manual.
What to try first (safe reset steps)
- Unplug the freezer (or switch off the circuit) for 5 minutes.
- Plug it back in and listen for the compressor and evaporator fan to start.
- Re-set the temperature using the inside control panel (UP for warmer, DOWN for colder on standard electronic controls).
- Allow several hours for the temperature to stabilize after any adjustment.
- If the red temperature alarm light is blinking and a buzzer sounds (deluxe electronic models), press ALARM OFF to silence the buzzer.
Which control type you have matters
Your 25328262804 may use an electromechanical knob or an electronic control inside the freezer. Use this quick check:
| Control style | What you see | “Reset” approach |
|---|---|---|
| Electromechanical | A dial/knob inside the cabinet | Power-cycle, then re-set the knob and wait several hours |
| Standard electronic | UP and DOWN buttons inside | Power-cycle, then re-set with buttons and wait several hours |
| Deluxe electronic | Panel with alarm features | Power-cycle; use ALARM OFF for buzzer; re-set temp |
Why it matters
A freezer that seems “stuck” often just needs a power-cycle and enough time to pull down temperature again. Frequent button pressing or rapid setting changes can delay stabilization and make troubleshooting harder.
When a “reset” does not fix it
If the freezer will not cool, keeps warming, or repeatedly alarms after a power-cycle, we focus on common cooling and defrost causes such as the defrost system or controls. For this model, parts often involved include the defrost timer 5304518034 and the defrost heater 5304496687.
Last updated: January 2026
What are the most common issues with 25328262804?
The most common problems we see with the Kenmore 25328262804 upright freezer are warm temperatures, heavy frost buildup, unusual fan noise, and door sealing issues. These symptoms usually trace back to the defrost system, airflow components, or the door gasket; the owner's manual helps confirm normal operation and settings.
Common symptoms and what they usually point to
- Freezer not cold enough or warming up: evaporator fan not running, dirty condenser coil, control issue, or sealed-system problem
- Frost or ice building up on the back wall: defrost heater, defrost thermostat, or defrost timer not working
- Loud buzzing, clicking, or humming: evaporator fan motor noise, compressor start components, or vibration
- Door hard to close or frost around the door: worn gasket, misaligned hinge, or air leaks
- Water/ice at the bottom: drain restriction or drain tube icing
Parts commonly involved on this model
If your symptoms match, these are frequently checked or replaced on the 25328262804:
- Defrost timer 5304518034
- Defrost heater 5304496687
- Refrigeration appliance defrost bi-metal thermostat 297216600
- Freezer evaporator fan motor 297309000
- Freezer door gasket 5304507201
Quick checks we recommend before replacing parts
- Verify the temperature control setting and allow 24 hours after any adjustment.
- Make sure the door closes tightly; inspect the gasket for gaps, tears, or hardened spots.
- Listen for the evaporator fan (inside) when the door switch is held closed.
- Check for heavy frost on the evaporator cover; that strongly suggests a defrost-system issue.
- Clean dust from the condenser area to improve heat removal.
Symptom-to-likely-cause guide
| Symptom | Most likely area | Common next step |
|---|---|---|
| Warm temps, little/no airflow | Airflow/fan | Test/replace evaporator fan motor |
| Heavy frost, temps rise over days | Defrost system | Check heater, thermostat, timer |
| Frost around door perimeter | Door seal/hinge | Inspect gasket, adjust hinge |
| Clicking and not cooling | Start/compressor circuit | Inspect relay/overload, then compressor |
Why it matters
Catching airflow or defrost problems early prevents food loss and reduces strain on the compressor. A small door air leak can also cause constant running, excess frost, and higher energy use.
Last updated: March 2026





