Installation guide
Owner’s manual
Error Codes
Does a Kenmore Elite have a reset button?
No. The Kenmore Elite gas range model 79077543805 does not use a single dedicated “reset” button; most resets are done by restoring power (breaker off then on) and then re-setting the clock and oven function as needed. See the reset and power-failure notes in the 79077543805 owner's manual.
How to reset the control on a Kenmore Elite 79077543805 range
- Turn all surface burner knobs to OFF.
- Turn the range’s circuit breaker OFF for 2 to 5 minutes.
- Turn the breaker ON.
- If the display is flashing or time is wrong, reset the clock and reselect your cooking mode.
What this reset helps with
- Control panel acting “stuck” or unresponsive
- Oven function not starting after a brief glitch
- Display time lost after a power interruption
- Clearing a one-time control hiccup after self-clean completes
Power failure behavior (important for this model)
This range uses electric ignition. If power fails while the oven is on, turn the oven off. When power returns, the oven can resume operation; then you typically need to reset the clock and oven function.
Quick guide: “reset” options and what they do
| Reset method | What it does | When to use it |
|---|---|---|
| Breaker reset (2 to 5 minutes) | Reboots the electronic oven control | Random glitches, frozen touch panel |
| Turn oven mode OFF then reselect | Stops a running cycle and restarts the command | Oven won’t start after canceling |
| Turn knob to LITE then adjust flame | Re-ignites a surface burner | Burner clicks but does not light |
Why it matters
On a gas range like the Kenmore Elite 79077543805, the oven control, igniters, and safety logic depend on stable electrical power. A proper power reset is the fastest safe way to restore normal operation without replacing parts.
Last updated: February 2026
How long should a Kenmore gas stove last?
A Kenmore gas range like model 79077543805 typically lasts 15 years with normal household use. Keeping burners clean, using the self-clean cycle correctly, and fixing ignition or temperature issues early helps you reach that expected lifespan; see the 79077543805 owner's manual for care and cleaning details.
Typical lifespan and what affects it
Most gas ranges reach their full service life when heat, gas flow, and ignition stay consistent.
- Heavy daily cooking shortens life compared to light use
- Spills and boil-overs that clog burner ports speed up wear
- Running the oven with poor ignition strains the gas valve and igniter
- Overheating from blocked airflow can damage controls and wiring
- Skipping routine cleaning leads to corrosion and sticking knobs
Quick maintenance checklist (high impact)
Use these habits to keep your Kenmore Elite range operating like it should.
- Wipe the cooktop and burner heads after they cool
- Keep burner caps seated correctly so flames stay even
- Avoid lining the oven bottom with foil (it can trap heat)
- Replace failed oven lights promptly (common wear item)
- If the oven takes longer than about a minute to light, inspect the igniter circuit
When “age” is really a repairable symptom
Many “old range” complaints are caused by a few common parts that wear over time.
| Symptom | Common cause | Example part for this model |
|---|---|---|
| Oven won’t ignite or takes too long to light | Weak igniter | Tappan range oven burner igniter 316489403 |
| Oven temperature swings or bakes unevenly | Temperature sensor drifting | Frigidaire range oven temperature sensor 316490000 |
| Oven light out | Burned-out bulb | Appliance light bulb, 40-watt |
Why it matters
A 15-year lifespan assumes safe, efficient combustion and accurate temperature control. When ignition is slow or temperatures are off, cooking results suffer and other components (like the oven gas valve and controls) work harder than they should.
Last updated: February 2026
Where to find model number on Kenmore Elite gas range?
On the Kenmore Elite 79077543805 gas range, the model and serial number are printed on the serial plate located on the right side of the oven front frame, behind the warmer drawer or storage drawer panel. Use the number exactly as shown when ordering parts or service; see the 79077543805 owner’s manual.
Quick steps to locate the serial plate
- Turn the range off and let it cool completely.
- Pull the warmer drawer or storage drawer fully open.
- Look at the right-hand front frame (the vertical frame area just inside the opening).
- Find the serial plate/identification plate label.
- Write down the model number, serial number, and any lot number/letter shown.
Common label locations (what to check first)
For this model family, the drawer-area serial plate is the primary location. If you do not see it right away, check these nearby spots:
| Location | What you’ll see | Why it’s there |
|---|---|---|
| Right side of oven front frame behind warmer/storage drawer | Serial plate with model and serial | Main identification point for parts and service |
| Drawer opening frame edges | Same label, different angle | Label can be easier to spot from the side |
| Inside the drawer cavity (right side) | Plate or sticker | Some units place it slightly recessed |
Why it matters
We use the exact model number to match the correct Kenmore-compatible parts and diagrams for your range. Even small model variations can change items like the oven igniter, temperature sensor, or burner components.
Last updated: February 2026
Who makes Kenmore 79077543805?
Kenmore is a brand sold by Sears, and the Kenmore Elite gas range model 79077543805 is part of the 790.7753* / 790.7754* range family shown in the 79077543805 owner’s manual. In this model family, the actual manufacturer is the company that built the range for Kenmore.
How to identify the manufacturer for model 79077543805
The most reliable way is to use the model prefix and the data plate information.
- Look at the model number prefix: 790 is the key identifier for this Kenmore Elite range family.
- Check the rating plate (model and serial tag) location listed in the 79077543805 owner’s manual.
- Match the prefix to the manufacturer code list used for Kenmore appliances.
- Use the full model number (including any color suffix) when ordering parts.
What “Kenmore” means vs. who built it
Kenmore does not operate factories for most appliances; Kenmore-branded ranges are typically produced by a major appliance manufacturer under contract, then sold as Kenmore.
| Term on the appliance | What it tells you | Why it matters |
|---|---|---|
| Kenmore / Kenmore Elite | Brand and product line | Determines styling, features, and support channels |
| Model prefix (example: 790) | Builder identifier used by Sears/Kenmore | Helps identify the original manufacturer and compatible parts |
| Full model number (79077543805) | Exact configuration | Ensures correct parts and documentation |
Why it matters for parts and repairs
Knowing the builder helps when you are comparing replacement parts like an oven igniter, temperature sensor, or gas valve, because the same Kenmore model family often shares components and wiring layouts.
If your oven will not heat or takes too long to ignite, common repair parts for this model include the tappan range oven burner igniter 316489403 and the frigidaire range oven temperature sensor 316490000.
Last updated: February 2026
