Kenmore 11088732794 washer/dryer laundry system Parts

Kenmore model numbers are read left to right: the first 3 digits are the source (who built the unit), and the remaining digits identify the design series and specific version. For your Kenmore laundry center, the full model number is 11088732794; record it exactly as shown in the 11088732794 owner's manual.

Where to find the model number on this laundry center

On Kenmore stacked laundry centers like model 11088732794, the model and serial label is located at the top inside the dryer door well (open the dryer door and look along the upper inside frame area). Use that label when ordering parts like a washer drain pump or dryer timer.

• Open the dryer door and inspect the top inside door well area
• Write down the model number and serial number exactly
• Keep the information with your purchase date for service records
• Use the full model number when searching diagrams and parts lists
• Match every digit; one wrong digit can pull the wrong part

What the digits typically mean (quick guide)

Kenmore numbers are structured so the prefix points to the manufacturing source, and the rest narrows down the exact configuration.

Section of model number	What it tells you	Example using 11088732794
First 3 digits (prefix)	Manufacturing source code	110
Remaining digits	Series and version details	88732794

Why it matters when buying parts

Parts can change by version even within the same Kenmore product line. Using the exact model number helps us match the correct washer and dryer components, including common wear items such as the washer drain pump WP3363394 or the dryer timer WP3406722.

Pro tip for faster parts matching

If the label is worn or hard to read, copy the number carefully and compare it to your paperwork. Our how to find your appliance model number (and what it means for parts) guide helps you confirm you have the right number before ordering.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For a Kenmore stacked laundry center like model 11088732794, good loading habits, correct water level selection, and basic upkeep help you reach the longer end of that range; chronic overloading and leaks shorten it.

What affects lifespan the most

• Overloading: loads that cannot move freely increase wear on the drive system and suspension.
• Water quality and detergent use: excess suds and mineral buildup stress seals and moving parts.
• Drain performance: slow draining makes the pump work harder and can leave residue behind.
• Balance and leveling: an unlevel unit vibrates more and wears components faster.
• Heat and airflow (dryer side): restricted venting raises temperatures and can shorten dryer component life.

Maintenance habits that add years

We recommend these practical habits for the 11088732794 laundry center:

• Choose a water level that lets items move freely (avoid packing the basket).
• Use the warmest water safe for the fabric and the right amount of detergent.
• Keep the lid and top area dry after use to reduce corrosion and odor.
• Check hoses periodically for bulges, cracking, or seepage.
• If draining slows, inspect the pump and hoses for lint, coins, or small socks.

Common wear parts (and what symptoms look like)

Symptom	Likely area	Example part for this model
Won’t drain or drains slowly	Drain pump or blockage	Washer drain pump WP3363394
Agitator doesn’t move clothes well	Agitator dogs	Agitator dog 80040
Loud spin, poor spin, burning smell	Drive coupling or clutch	Coupling 285753A

Why it matters

Knowing the typical 10 to 15 year lifespan helps you decide whether a repair (like a drain pump or coupling) is a smart investment versus planning for replacement. It also helps you prevent the most common early-failure causes: overloading, vibration, and poor draining.

For model-specific operating and care guidance, follow the cycle, loading, and selector instructions in the 11088732794 owner's manual.

Last updated: February 2026

Kenmore laundry center model 11088732794 is a compact, stacked washer and dryer unit; dryers in this style are typically around 5.5 cu. ft. (often roughly 5.0 to 5.9 cu. ft.). For the exact listed capacity for your specific unit, confirm it in the 11088732794 owner's manual.

Typical capacity for stacked laundry center dryers

Most Kenmore stacked laundry center dryers are smaller than full-size standalone dryers; they are designed for everyday loads, not oversized comforters.

• Typical drum capacity range: 5.0 to 5.9 cu. ft.
• Best load size: medium loads that tumble freely
• Bulky items: dry one at a time when possible
• If drying is slow, reduce load size before changing parts

How to confirm the exact capacity for your unit

Use the model identification and documentation tied to 11088732794.

• Check the specifications section in the 11088732794 owner's manual
• Verify the model number from the label (commonly at the top inside the dryer door well)
• Look for a tech sheet stored inside the cabinet (often behind the control panel or lower access panel)
• Match any capacity listing to your exact model number and series

Capacity classes (quick comparison)

Dryer type	Typical capacity	Common use
Stacked laundry center dryer	5.0 to 5.9 cu. ft.	Apartments, closets, everyday loads
Full-size standalone dryer	6.5 to 7.4 cu. ft.	Larger family loads, more bulky items

Why it matters

Capacity directly affects drying performance. When the drum is overloaded, clothes cannot tumble and airflow drops; that increases dry time and can cause uneven drying.

When a part issue mimics “too small” capacity

If loads are reasonable but drying is still poor, a worn drive system can reduce tumbling.

• Dryer idler pulley WP691366 helps keep proper belt tension so the drum turns correctly

Last updated: February 2026